journal article·2013-11

Characterization of Microstructure, Texture, and Microtexture in Near-Alpha Titanium Mill Products

A. L. Pilchak, C. J. Szczepanski, J. A. Shaffer, A. A. Salem, S. L. Semiatin

Publisher page

Abstract

Microstructure, texture, and microtexture in Ti-6Al-2Sn-4Zr-2Mo-0.1Si billet/bar of three different diameters (57, 152, and 209 mm) were quantified using backscattered electron imaging and electron backscatter diffraction. All three billets exhibited a microstructure comprising a large fraction (≥70 pct) of primary alpha particles, the average size of which decreased and aspect ratio increased with increasing reduction/decreasing billet diameter, or trends suggestive of low final hot working temperatures and/or slow cooling rates after deformation. Appreciable radial variations in the volume fraction and aspect ratio of alpha particles were noticeable only for the smallest-diameter billet. Alpha-phase textures were typical of axisymmetric deformation, but were relatively weak (~3× random) for all billet diameters. By contrast, bands of microtexture, which were multiple millimeters in length along the axial direction, were relatively strong for all of the materials. The intensity and radial thickness of the bands tended to decrease with decreasing billet diameter, thus indicating the important influence of imposed strain on the elimination of microtexture and the possible influence of surface preform microstructure following the beta quench on the evolution of microstructure and microtexture.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. G. Lütjering and J.C. Williams: Titanium, Springer Verlag, Berlin, 2007.
2. S.L. Semiatin, V. Seetharaman, and I. Weiss: in Advances in the Science and Technology of Titanium Alloy Processing, I. Weiss, R. Srinivasan, P.J. Bania, D. Eylon, and S.L. Semiatin, eds., TMS, Warrendale, PA, 1997, pp. 3–73.
3. M.G. Glavicic, P.A. Kobryn, F. Spadafora, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. A346, pp. 8-18.10.1016/S0921-5093(02)00525-7 ↗
4. A.N. Kalinyuk, N.P. Trigub, V.N. Zamkov, O.M. Ivasishin, P.E. Markovsky, R.V. Teliovich, and S.L. Semiatin: Mater. Sci. Eng. A, 2003, vol. A346, p. 178-188.10.1016/S0921-5093(02)00518-X ↗
5. M.G. Glavicic, P.A. Kobryn, R.L. Goetz, K.O. Yu, and S.L. Semiatin: in Ti-2003: Science and Technology, G. Luetjering and J. Albrecht, eds., Wiley-VCH Verlag GmbH, Weinheim, 2004, pp. 1299–307.
6. S.L. Semiatin, V. Seetharaman, and I. Weiss: Mater. Sci. Eng. A, 1999, vol. A263, pp. 257-271.10.1016/S0921-5093(98)01156-3 ↗
7. E.B. Shell and S.L. Semiatin: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3219-3229.10.1007/s11661-999-0232-4 ↗
8. H. Inagaki: Z. für Metallkunde, 1995, vol. 86, pp. 643-650.
9. C.H. Park, K.-T. Park, D.H. Shin, and C.S. Lee: Materials Transactions, 2008, vol. 49, no. 10, pp. 2196-2200.10.2320/matertrans.L-MRA2008832 ↗
10. K. Wang, W. Zeng, Y. Zhao, Y. Shao, and Y. Zhou: Mat. Sci. Eng. A, 2010, vol. A527, pp. 6193-6199.10.1016/j.msea.2010.06.059 ↗
11. K. Wang, W. Zeng, Y. Zhao, Y. Lai, and Y. Zhou: Mat. Sci. Eng. A, 2010, vol. A527, pp. 2259-2566.
12. H.-W. Song, S.-H. Zhang, and M. Cheng: J. Alloys and Comp., 2009, vol. 480, pp. 922-927.10.1016/j.jallcom.2009.02.059 ↗
13. X. Ma, W. Zeng, F. Tian, and Y. Zhou: Mat. Sci. Eng. A, 2012, vol. A548, pp. 6-11.10.1016/j.msea.2012.03.022 ↗
14. N. Stefansson, S.L. Semiatin, and D. Eylon: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3527-3534.10.1007/s11661-002-0340-x ↗
15. S.L. Semiatin, N. Stefansson, and R.D. Doherty: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1372-1376.10.1007/s11661-005-0229-6 ↗
16. A.P. Woodfield, M.D. Gorman, R.R. Corderman, J.A. Sutliff, and B. Yamrom: in Titanium’95: Science and Technology, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., Institute of Materials, London, 1995, pp. 1116–23.
17. L. Toubal, P. Bocher, A. Moreau, and D. Levesque: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 744-750.10.1007/s11661-009-0128-3 ↗
18. A. Bhattacharjee, A.L. Pilchak, O.I. Lobkis, J.W. Foltz, S.I. Rokhlin, and J.C. Williams: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2358-2372.10.1007/s11661-011-0619-x ↗
19. A.L. Pilchak and J.C. Williams: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1000-1027.10.1007/s11661-010-0507-9 ↗
20. C.J. Szczepanski, S.K. Jha, J.M. Larsen, and J.W. Jones: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2841-2851.10.1007/s11661-008-9633-z ↗
21. V. Sinha, J.E. Spowart, M.J. Mills, and J.C. Williams: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1507-1518.10.1007/s11661-006-0095-x ↗
22. K. LeBiavant, S. Pommier, and C. Prioul: Fatigue Fract. Eng. Mater. Struct., 2002, vol. 25, pp. 527-545.10.1046/j.1460-2695.2002.00480.x ↗
23. T.R. Bieler and S.L. Semiatin: International Journal of Plasticity, 2002, vol. 18, pp. 1165-1189.10.1016/S0749-6419(01)00057-2 ↗
24. H. Moustahfid, N. Gey, M. Humbert, and M.J. Philippe: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 51-59.10.1007/s11661-997-0082-x ↗
25. S.V. Divinski, V.N. Dnieprenko, and O.M. Ivasishin: Mater. Sci. Eng. A, 1998, vol. A243, pp. 201-205.10.1016/S0921-5093(97)00801-0 ↗
26. L. Germain, N. Gey, M. Humbert, P. Bocher, and M. Jahazi: Acta Mater., 2005, vol. 53, pp. 3535-3543.10.1016/j.actamat.2005.03.043 ↗
27. M. Humbert, L. Germaine, N. Gey, P. Bocher, and M. Jahazi: Mater. Sci. Eng. A, 2006, vol. A430, pp. 157-164.10.1016/j.msea.2006.05.047 ↗
28. L. Germain, N. Gey, M. Humbert, P. Vo, M. Jahazi, and P. Bocher: Acta Mater., 2008, vol. 56, pp. 4298–4308.10.1016/j.actamat.2008.04.065 ↗
29. L. Zeng and T.R. Bieler: Mater. Sci. Eng. A, 2005, vol. A392, pp. 403-414.10.1016/j.msea.2004.09.072 ↗
30. G. Lutjering: Mater. Sci. Eng. A, 1998, vol. A243, 1998, pp. 32–45.10.1016/S0921-5093(97)00778-8 ↗
31. N. Gey, P. Bocher, E. Uta, L. Germain, and M. Humbert: Acta Mater., 2012, vol. 60, pp. 2647-2655.10.1016/j.actamat.2012.01.031 ↗
32. C.J. Szczepanski, J.M. Larsen, and S.L. Semiatin: unpublished research, 2010.
33. G.A. Salishchev, O.R. Valiakhmetov, and R.M. Galeyev: J. Mater. Sci., 1993, vol. 28, pp. 2898-2902.10.1007/BF00354692 ↗
34. A.R. Shiveley, P.A. Shade, A.L. Pilchak, J.S. Tiley, and R. Kerns: J. Micros., 2011, vol. 244, no. 2, pp. 181-186.10.1111/j.1365-2818.2011.03524.x ↗
35. A.L. Pilchak, A.R. Shiveley, J.S. Tiley, and D.L. Ballard: J. Micros., 2011, vol. 244, no. 1, pp. 38-44.10.1111/j.1365-2818.2011.03496.x ↗
36. A.L. Pilchak, A.R. Shiveley, P.A. Shade, J.S. Tiley, and D.L. Ballard: J. Micros., 2012, vol. 248, no. 2, pp. 172-186.10.1111/j.1365-2818.2012.03661.x ↗
37. A.A. Salem and J.A. Shaffer: TiZone™, Patent Pending, Materials Resources LLC, Dayton, OH, 2012.
38. N. Gey, M. Humbert, M.J. Philippe, and Y. Combres: Mater. Sci. Eng. A, 1997, vol. A230, pp. 68-74.10.1016/S0921-5093(97)80111-6 ↗
39. D. Bhattacharyya, G.B. Viswanathan, R. Denkenberger, D. Furrer and H.L. Fraser: Acta Mater., 2003, vol. 51, pp. 4679-4691.10.1016/S1359-6454(03)00179-4 ↗
40. S. Torquato: Random Heterogeneous Materials, Springer-Verlag, New York, 2002.10.1007/978-1-4757-6355-3 ↗
41. S.R. Kalidindi, S. R. Niezgoda, and A. A. Salem: JOM, 2011, vol. 63, no. 4, pp. 34-41.10.1007/s11837-011-0057-7 ↗