Partial Redetermination of the Fe-W Phase Diagram
Source abstract
Abstract
The objective of the current study is to perform a careful investigation of the (Fe) and (W) solvus and of the intermetallic compounds in the Fe-W system as it could have a significant impact on higher-order systems based on this binary system. Two key alloys, Fe-14 at. pct W and Fe-50 at. pct W, and a diffusion couple were synthesized based on the literature. They were studied by long time annealing experiments with a selected heat treatment route, X-Ray diffraction analysis, and electron microprobe analysis with a careful control of impurity levels of C, Si, and O. The two intermetallic phases μ-Fe7W6 and λ-Fe2W are characterized and the composition range of the μ-Fe7W6 phase is specified. The phase previously reported as FeW is most probably a ternary carbide with low carbon content. An accurate determination of the solubility of W in αFe and of Fe in αW is presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. W. P. Sykes and K. R. Van Horn: Trans. AIME, 1933, vol. 105, pp. 198-214.
2. G. V. Raynor and V. G. Rivlin: Int. Metals Reviews, 1981, vol. 4, pp. 213-249.10.1179/095066081790149221 ↗
3. S.V. Nagender Naidu, A.M. Sriramamurthy, and P. Rama Rao: Phase Diagrams of Binary Tungsten Alloys, Indian Institute of Metals, Calcutta, 1998, pp. 89–101.
4. E. T. Henig, H. Hofmann, G. Petzow (1981) In: HM Ortner (ed) Plansee seminar. Metallwerk Plansee, Reutte, pp. 335-359
5. H. Hofmann: Diplomarbeit, TU Berlin, 1980.
6. H. Hofmann: Dissertation Thesis, TU Berlin, 1983.
7. C. S. Smith: J. Appl. Phys, 1941, vol. 12, pp. 817-822.10.1063/1.1712872 ↗
8. E. P. Abrahamson II and S.L. Lopata: Trans. AIME, 1966, vol. 236, pp. 76-87.
9. E. P. Sinha and W. Hume-Rothery: J. Iron and Steel Inst., 1967, vol. 205, pp. 1145-1149.
10. G. Kirchner, H. Harvig and B. Uhrenius: Metall. Trans., 1973, vol. 4, pp. 1059-1067.10.1007/BF02645609 ↗
11. T. Takayama, M. Y. Wey and T. Nishizawa: Trans. Jpn Inst. Met, 1981, vol. 22, pp. 315-325.10.2320/matertrans1960.22.315 ↗
12. P. Gustafson: Metall. Trans., 1987, vol. 18A, pp. 175-188.10.1007/BF02825699 ↗
13. P. Galimberti: PhD Thesis, Grenoble, INP, 2007.
14. G. V. Raynor and V. G. Rivlin: Int. Metals Reviews, 1983, vol. 28, pp. 122-129.10.1179/095066083790411713 ↗
15. G. Kostakis: Z. Metallkde, 1985, vol. 76, pp. 34-36.
16. P.Y. Hou and J. Stringer: Oxid. Met., 1990, vol. 33, pp. 357-369.10.1007/BF00666805 ↗
17. R. Durham, B. Gleeson and D.J. Young: Mat. and corrosion, 1998, vol. 49, pp. 855-863.10.1002/(SICI)1521-4176(199812)49:12<855::AID-MACO855>3.0.CO;2-5 ↗
18. W. P. Sykes: Trans. AIME, 1926, vol. 73, pp. 968-1008.
19. E.P. Chartkoff and W. P. Sykes: Trans. AIME, 1930, vol. 89, pp. 566-573.
20. W. P. Sykes: Metals Handbook, ASM, 1948, Cleveland, OH, pp. 1220.
21. R. Cury, J.-M. Joubert, S. Tusseau-Nenez, E. Leroy, A. Allavena-Valette : Intermetallics, 2009, vol. 17, pp. 174-178.10.1016/j.intermet.2008.11.001 ↗
22. B. C. Muddle: Metall. Trans. A, 1984, vol. 15A, pp. 1089-1098.10.1007/BF02644702 ↗
23. J. B. Posthill and D. V. Edmonds: Metall. Trans. A, 1986, vol. 17A, pp. 1921-1934.10.1007/BF02644990 ↗
24. J.-M. Joubert, N. Dupin: Intermetallics, 2004, vol. 12, pp. 1373-1380.10.1016/j.intermet.2004.04.036 ↗
25. W. P. Sykes: Trans. ASM, 1936, vol. 24, pp. 541-550.