Comparative High-Temperature Corrosion Behavior of Ni-20Cr Coatings on T22 Boiler Steel Produced by HVOF, D-Gun, and Cold Spraying
Source abstract
Abstract
To protect materials from surface degradations such as wear, corrosion, and thermal flux, a wide variety of materials can be deposited on the materials by several spraying processes. This paper examines and compares the microstructure and high-temperature corrosion of Ni-20Cr coatings deposited on T22 boiler steel by high velocity oxy-fuel (HVOF), detonation gun spray, and cold spraying techniques. The coatings’ microstructural features were characterized by means of XRD and FE-SEM/EDS analyses. Based upon the results of mass gain, XRD, and FE-SEM/EDS analyses it may be concluded that the Ni-20Cr coating sprayed by all the three techniques was effective in reducing the corrosion rate of the steel. Among the three coatings, D-gun spray coating proved to be better than HVOF-spray and cold-spray coatings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Erosion and Abrasive Machining · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. A.M. Beltran and D.A. Shores: in The Superalloys, C.T. Sims and W.C. Hagel, vol. 44 (24), Wiley, New York, 1972, pp. 4289–96.
2. Eliaz, N., Shemesh, G. and Latanision, R.M. (2002), Eng. Fail. Anal., Vol. 9, pp. 31-43.10.1016/S1350-6307(00)00035-2 ↗
3. Gil, L. and Staia, M.H., (1999), Surf. Coat. Technol., Vol. 120-121, pp. 423-29.10.1016/S0257-8972(99)00494-6 ↗
4. Gil, L. and Staia, M.H., (2002), Thin Solid Films, Vol. 420-421, pp. 446-54.10.1016/S0040-6090(02)00815-5 ↗
5. Lugscheider, E., Herbst, C. and Zhao, L., (1998), Surf. Coat. Technol., Vol. 108-109, pp. 16-23.10.1016/S0257-8972(98)00630-6 ↗
6. M.R. Ramesh, S. Prakash, S.K. Nath, P.K. Sapra, and B. Venkatraman: Wear, 2010, 269, 197–205.10.1016/j.wear.2010.03.019 ↗
7. R.A. Mahesh, R. Jayaganthan, S. Prakash, Mater. Chem. Phys., 2010, 119, 3, 449-57.10.1016/j.matchemphys.2009.09.024 ↗
8. D. Ozimina, M. Madej, T. Kałdoński., Tribol Lett., 2011, 41, 103–111.10.1007/s11249-010-9684-3 ↗
9. M. Benegra, M. Magnani, H. Goldenstein, O. Maranho, and G. Pintaude: Surf. Eng., 2010, vol. 26 (6), 463–68.10.1179/026708410X12550773058144 ↗
10. A.P. Alkimov, A.N. Papyrin, V.P. Dosarev, N.I. Nesterovich, and M.M. Shushpanov: US Patent 5,302,414, 12 April 1994.
11. G. Kaushal, H. Singh, and S. Prakash: J. Therm. Spray Technol., 2012, DOI:10.1007/s11666-012-9770-1, available Online, March 2012.10.1007/s11666-012-9770-1 ↗
12. Kosarev, V.F., Klinkov, S.V., Alkhimov, A.P. and Papyrin, A.N., (2003), J. Therm. Spray Technol., Vol. 12, No. 2, pp. 265-81.10.1361/105996303770348384 ↗
13. N. Bala, H. Singh, J. Karthikeyan, and S. Prakash: Surf. Eng., 2013, DOI:10.1179/1743294413Y.0000000148.10.1179/1743294413Y.0000000148 ↗
14. G. Kaushal, H. Singh, and S. Prakash: International Thermal Spray Conference and Exposition (ITSC 08), Maastricht, The Netherlands, 02–04 June 2008, pp. 1351–56.
15. Kaushal, G., Singh, H. and Prakash, S. (2011) Oxid. Met., 76 (3-4), 169–91.10.1007/s11085-011-9245-7 ↗
16. Singh, H., Puri, D., and Prakash, S. (2005) Surf. Coat. Technol. 192, 27–38.10.1016/j.surfcoat.2004.03.030 ↗
17. Metals Handbook: ASM Publication, vol. 10, Metals Park OH, 1975.
18. National Materials Advisory Board Report: Coatings for High-Temperature Structural Materials: Trends and Opportunities, National Academy Press, Washington, DC, 1996.
19. Bala, N., Singh, H. and Prakash, S., (2009) Appl. Surf. Sci., Vol. 255, No. 15, pp. 6862–69.10.1016/j.apsusc.2009.03.006 ↗
20. Zhao, W.M., Wang, Y., Han, T., Wu, K.Y. and Xue, J., (2004), Surf. Coat. Technol., Vol. 183, pp. 118-25.10.1016/j.surfcoat.2003.09.053 ↗
21. Zhao, W.M., Wang, Y., Dong, L.X., Wu, K.Y. and Xue, J., (2005), Surf. Coat. Technol., Vol. 190, pp. 293-98.10.1016/j.surfcoat.2004.04.057 ↗
22. Miguel, J.M., Guilemany, J.M. and Vizcaino, S. (2003) Tribol. Int, Vol. 36, pp. 181-87.10.1016/S0301-679X(02)00144-5 ↗
23. Sahraoui, T., Fenineche, N.E., Montavon, G. and Coddet, C. (2003) Mater. Des., 24, pp. 309-13.10.1016/S0261-3069(03)00059-1 ↗
24. Lih, W.C. Yang, S.H. Su, C.Y. Huang, S.C. Hsu, I.C. and Leu, M.S., Surf. Coat. Technol. 133–134 (2000) 54–60.10.1016/S0257-8972(00)00873-2 ↗
25. Rajasekaran, B., Raman, S.G.S., Joshi, S.V. and Sundararajan, S., (2006) Surf. Coat. Technol., Vol. 201, Issue 3–4, pp. 1548-58.10.1016/j.surfcoat.2006.02.023 ↗
26. Y.A. Kharlamov (1987) Mater. Sci. Eng., 93, 1–37.10.1016/0025-5416(87)90409-5 ↗
27. Sampath, S., Jiang, X.Y., Matejicek, J., Prchlik, L., Kulkarni, A. and Vaidya, A., (2004) Mater. Sci. Eng. A Struct., Vol. 364, pp. 216-31.10.1016/j.msea.2003.08.023 ↗
28. Ak, N.K., Tekmen, C., Ozdemir, I., Soykan, H.S. and Celik, E., (2003) Surf. Coat. Technol, Vol. 173-174, pp. 1070-73.10.1016/S0257-8972(03)00367-0 ↗
29. Singh, H., Puri, D. and Prakash, S. (2005b) Surf. Coat. Technol., 192(1), pp. 27-38.10.1016/j.surfcoat.2004.03.030 ↗
30. Singh, H., Puri, D., Prakash, S., Maiti, R. (2007) Mater. Sci. Eng. A 464 (1), pp. 110–16.10.1016/j.msea.2007.01.088 ↗
31. Lee, H.Y., Young, H.Y., Young, C.L., Young, P.H. and Kyung, H.K., (2005) J. Therm. Spray Technol., Vol. 14, No. 2, pp. 183-86.10.1361/105996304523791 ↗
32. Kolta, G.A., Hewaidy, I.F. and Felix, N.S., (1972) Thermochim. Acta, Vol. 4, pp. 151-64.10.1016/S0040-6031(72)80029-7 ↗
33. Das, D., Balasubramaniam, R. and Mungole, M.N., (2002) J. Mater. Sci., Vol. 37, No. 6, pp.1135-42.10.1023/A:1014307219963 ↗
34. F.H. Stott and G.C. Wood: Mater. Sci. Technol., 1998, vol. 4, pp. 1072–78.10.1179/026708388790221304 ↗
35. S.R.J. Saunders and J.R. Nicholls: Mater. Sci. Technol., 1998, vol. 5, pp. 780–98.10.1179/026708389790222843 ↗
36. S. Kamal, R. Jayaganthan, S. Prakash, and S. Kumar: J. Alloys Compd., 2008, vol. 463 (1–2), pp. 358–72.10.1016/j.jallcom.2007.09.019 ↗
37. F.H. Stott: Tribol. Int., 1998, vol. 31 (1–3), pp. 61–71.10.1016/S0301-679X(98)00008-5 ↗
38. U.K. Chatterjee, S.K. Bose, and S.K. Roy: Environmental Degradation of Metals, Marcel Dekker, New York, NY, 2001.10.1201/9781482292244 ↗
39. Ul-Hamid, A. (2003) Mater. Chem. Phys., 2003, 80, 135–42.10.1016/S0254-0584(02)00448-0 ↗
40. Sidhu, T.S. Agrawal, R.D. and Prakash, S. (2006) J. Mater. Eng. Perform., 15(1), 130–38.10.1361/105994906X83411 ↗
41. Sundararajan, T, Kuroda, S. Itagaki, T. and Abe, F. (2003) ISIJ Int., 43(1), 104–111.10.2355/isijinternational.43.104 ↗
42. S.S. Chatha, H.S. Sidhu, B.S. Sidhu (2012) Surf. Coat. Technol., 206(19–20), 3839–50.10.1016/j.surfcoat.2012.01.060 ↗
43. Zhu, Z., Cheng, X., Ye, W., Min, J. (2012). Int. J. Miner. Metall. Mater. 19(3), 266–70.10.1007/s12613-012-0549-7 ↗