journal article·2002-05

Corrosion behavior of austenitic alloy 690 under anodic and cathodic potentials

R. S. Dutta, G. K. Dey, A. Lobo, R. Purandare, S. K. Kulkarni

Publisher page

Abstract

The corrosion behavior of austenitic alloy 690 in a solution-annealed condition has been evaluated with the application of anodic as well as cathodic potentials in an acidic chloride solution at room temperature (RT). In a 0.5M H2SO4 + 0.5M NaCl solution, the alloy displayed active-passive pitting behavior with the application of an anodic potential. Surface films, formed at the onset and later stage of the passive region, were characterized using X-ray photoelectron spectroscopy (XPS). The XPS revealed that the surface film formed at the onset of passivity (+ 100 mV SCE) consisted of Cr(OH)3, without any Fe+3/Fe+2. The presence of nickel in the film was found in a transition state of Ni+2 and Ni0. The passive film formed at the higher anodic potential (+ 700 mV SCE) consisted of Cr2O3 without any Fe+3/Fe+2 or even Ni+2/Ni0. Microscopic studies of alloy 690 after anodic polarization in an acidic chloride solution revealed pitting, which was found to be initiated at large, faceted TiN-type inclusions. The susceptibility of the alloy to hydrogen embrittlement has been investigated by conducting cathodic charging of the tensile samples in a 0.5M H2SO4 solution at RT and by subsequent tensile testing of the charged samples in air at a strain rate of 1.3 × 10−4 s−1 up to fracture. An indication toward hydrogen-induced ductility loss was noticed for the samples of the alloy, which is believed to be attributable to a hydrogen-enhanced microvoid growth process. Since the microvoid growth process occurs at the last stage of fracture, the effect of hydrogen on the ductility of the alloy is little.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. N.S. McIntyre, R.D. Davidson, T.L. Walzak, A.M. Brennenstuhl, F. Gonzalez, and S. Corazza: Corr. Sci., 1995, vol. 37, pp. 1059–83.10.1016/0010-938X(95)00015-C ↗
2. M.F. Montemor, M.G.S. Ferreira, N.E. Hakiki, and M. Da Cunha Belo: Corr. Sci., 2000, vol. 42, pp. 1635–50.10.1016/S0010-938X(00)00012-3 ↗
3. K. Yamanaka: Proc. 5th Int. Symp. on Environmental Degradation of Materials in Nuclear Power Systems—Water Reactors, Monterey, CA, August 25–29, 1991, American Nuclear Society, Inc., La Grange Park, IL, 1991, pp. 773–79.
4. K. Hashimoto and K. Asami: Corr. Sci., 1979, vol. 19, pp. 427–35.10.1016/0010-938X(79)90041-6 ↗
5. P. Marcus and J.M. Grimal: Corr. Sci., 1992, vol. 33, pp. 805–14.10.1016/0010-938X(92)90113-H ↗
6. N. Totsuka, E. Lunarska, G. Cragnolino, and Z. Szklarska-Smialowska: Corrosion, 1987, vol. 43, pp. 505–14.10.5006/1.3583894 ↗
7. N. Totsuka and Z. Szklarska-Smialowska: Corrosion, 1987, vol. 43, pp. 734–38.10.5006/1.3583860 ↗
8. R.B. Rebek and Z. Szklarska-Smialowska: Corrosion, 1991, vol. 47, pp. 754–57.10.5006/1.3585185 ↗
9. Y. Shen and P.G. Shewmon: Corrosion, 1991, vol. 47, pp. 712–18.10.5006/1.3585311 ↗
10. R. Bandy and D. Van Rooyen: Corrosion, 1984, vol. 40, pp. 425–30.10.5006/1.3593950 ↗
11. G. Economy, R.J. Jacko, and F.W. Pement: Corrosion, 1987, vol. 43, pp. 727–34.10.5006/1.3583859 ↗
12. G. Sui, J.M. Titchmarsh, G.B. Heys, and J. Congleton: Corr. Sci., 1997, vol. 39, pp. 565–87.10.1016/S0010-938X(97)86103-3 ↗
13. C.M. Younes, F.H. Morrissey, G.C. Allen, and P. McIntyre: Br. Corr. J., 1997, vol. 32, pp. 185–92.10.1179/bcj.1997.32.3.185 ↗
14. C.M. Brown and W.J. Mills: Corrosion, 1999, vol. 55, pp. 173–86.10.5006/1.3283978 ↗
15. I.M. Robertson and H.K. Birnbaum: Acta Metall., 1986, vol. 34, pp. 353–66.10.1016/0001-6160(86)90071-4 ↗
16. P.D. Hicks and C.J. Altstetter: Metall. Trans. A, 1992, vol. 23A, pp. 237–49.10.1007/BF02660868 ↗
17. Kaori Miyata and Masaaki Igarashi: Metall. Trans. A, 1992, vol. 23A, pp. 953–61.10.1007/BF02675570 ↗
18. W.S. Walston, I.M. Bernstein, and A.W. Thompson: Metall. Trans. A, 1992, vol. 23A, pp. 1313–22.10.1007/BF02665063 ↗
19. J.R. Crum: Corrosion, 1986, vol. 42, pp. 368–72.10.5006/1.3584917 ↗
20. R.W. Staehle: in The Theory of Stress Corrosion Cracking in Alloys, J.C. Scully, ed., NATO, Brussels, 1971, pp. 223–88.
21. R.S. Dutta and R. Tewari: Br. Corr. J., 1999, vol. 34, pp. 201–05.10.1179/000705999101500851 ↗
22. G.K. Dey, R.T. Savalia, S.K. Sharma, and S.K. Kulkarni: Corr. Sci., 1989, vol. 29, pp. 823–31.10.1016/0010-938X(89)90055-3 ↗
23. P. Marcus and J.-M. Herbelin: Corr. Sci., 1993, vol. 34, pp. 1123–45.10.1016/0010-938X(93)90293-P ↗
24. B. Stypula and J. Stoch: Corr. Sci., 1994, vol. 36, pp. 2159–67.10.1016/0010-938X(94)90014-0 ↗
25. N.S. McIntyre, D.G. Zetaruk, and D. Owen: J. Elec. Soc., 1979, vol. 126, pp. 750–60.10.1149/1.2129132 ↗
26. I. Olefjord, B. Brox, and U. Jelvestam: J. Elec. Soc., 1985, vol. 132, pp. 2854–61.10.1149/1.2113683 ↗
27. Y.C. Lu, C.R. Clayton, and A.R. Brooks: Corr. Sci., 1989, vol. 29, pp. 863–80.10.1016/0010-938X(89)90058-9 ↗
28. P. Marcus and I. Olefjord: Corrosion, 1986, vol. 42, pp. 91–98.10.5006/1.3584890 ↗
29. C.R. Brundle, T.J. Chuang, and K. Wandelt: Surface Sci., 1977, vol. 68, pp. 459–68.10.1016/0039-6028(77)90239-4 ↗
30. A. SadoughVanini, J.-P. Audouard, and P. Marcus: Corr. Sci., 1994, vol. 36, pp. 1825–34.10.1016/0010-938X(94)90021-3 ↗
31. K. Asami and K. Hashimoto: Corr. Sci., 1977, vol. 17, pp. 559–70.10.1016/S0010-938X(77)80002-4 ↗
32. G.P. Halada, D. Kim, and C.R. Clayton: Corrosion, 1996, vol. 52, pp. 36–46.10.5006/1.3292093 ↗
33. Mars G. Fontana and Norbert D. Greene: Corr. Eng., 2nd ed., McGraw-Hill, New York, NY, 1982.
34. J.R. Galvele: in Passivity of Metals, R.P. Frankenthal and J. Kruger, eds., The Electrochemical Society, Princeton, NJ, 1978, pp. 285–327.
35. G. Okamoto and T. Shibata: in Passivity of Metals, R.P. Frankenthal and J. Kruger, eds., The Electrochemical Society, Princeton, NJ, 1978, pp. 646–77.
36. R.S. Dutta, K. Madangopal, H.S. Gadiyar, and S. Banerjee: Br. Corr. J., 1993, vol. 28, pp. 217–21.10.1179/000705993798318560 ↗
37. G.C. Smith: in Hydrogen in Metals, I.M. Bernstein and A.W. Thompson, eds., ASM, Metals Park, OH, 1973, pp. 485–511.
38. J.A. Harris, R.C. Scarberry, and C.D. Stephens: Corrosion, 1972, vol. 28, pp. 57–62.10.5006/0010-9312-28.2.57 ↗
39. L. Fournier, D. Delafoss, and T. Magnin: Mater. Sci. Eng., 1999, vol. A269, pp. 111–19.10.1016/S0921-5093(99)00167-7 ↗
40. P.D. Hicks and C.J. Altstetter: Metall. Trans. A, 1990, vol. 21A, pp. 365–72.10.1007/BF02782416 ↗
41. G.K. Dey, R. Tewari, P. Rao, S.L. Wadekar, and P. Mukhopadhyay: Metall. Trans. A, 1993, vol. 24A, pp. 2709–19.10.1007/BF02659495 ↗
42. Su-IL Pyun and R.A. Oriani: Corr. Sci., 1989, vol. 29, pp. 485–96.10.1016/0010-938X(89)90001-2 ↗