journal article·2007-03

The Effect of Multiple Deformations on the Formation of Ultrafine Grained Steels

Hossein Beladi, Georgina L. Kelly, Peter D. Hodgson

Publisher page

Abstract

A C-Mn-Nb-Ti steel was deformed by hot torsion to study ultrafine ferrite formation through dynamic strain-induced transformation (DSIT) in conjunction with air cooling. A systematic study was carried out first to evaluate the effect of deformation temperature and prior austenite grain size on the critical strain for ultrafine ferrite formation (e C,UFF) through single-pass deformation. Then, multiple deformations in the nonrecrystallization region were used to study the effect of thermomechanical parameters (i.e., strain, deformation temperature, etc.) on e C,UFF. The multiple deformations in the nonrecrystallization region significantly reduced e C,UFF, although the total equivalent strain for a given thermomechanical condition was higher than that required in single-pass deformation. The current study on a Ni-30Fe austenitic model alloy revealed that laminar microband structures were the key intragranular defects in the austenite for nucleation of ferrite during the hot torsion test. The microbands were refined and overall misorientation angle distribution increased with a decrease in the deformation temperature for a given thermomechanical processing condition. For nonisothermal multipass deformation, there was some contribution to the formation of high-angle microband boundaries from strains at higher temperature, although the strains were not completely additive.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. R.K. Gibbs, P.D. Hodgson, and B.A. Parker: Morris E. Fine Symp., P.K. Liaw, J.R. Weertman, H.L. Marcus, and J.S. Santner, eds., TMS, Warrendale, PA, 1991, pp. 73–81
2. P.D. Hodgson, M.R. Hickson, and R.K. Gibbs: United States Patent No. 6,027,587, Feb. 22, 2000
3. H. Yada, Y. Matsumura, and K. Nakajima: United States Patent No. 4,466,842, Aug. 21, 1984
4. P.J. Hurley: Ph.D. Thesis, Monash University, Melbourne, 1999
5. M.R. Hickson, R.K. Gibbs, P.D. Hodgson: ISIJ Int., 1999, 39:1176–8010.2355/isijinternational.39.1176 ↗
6. Choo W.Y., Um K.K., Lee J.S., Seo D.H., Choi J.K.: 2001. In: S. Takaki, and T. Maki (Eds) Int. Symp. on Ultrafine Grained Steels (ISUGS 2001). Fukuoka, Japan, pp. 2–9
7. P.D. Hodgson, M.R. Hickson, R.K. Gibbs: Scripta Mater., 1999, 40:1179–8410.1016/S1359-6462(98)00411-4 ↗
8. H. Beladi, G.L. Kelly, P.D. Hodgson: Mater. Trans., 2004, 45 (7):1–510.2320/matertrans.45.2214 ↗
9. H. Beladi, G.L. Kelly, A. Shokouhi, P.D. Hodgson: Mater. Sci. Eng. A, 2004, 367:152–6110.1016/j.msea.2003.09.095 ↗
10. Adachi Y., Hinotani S.: 2001 In: Takaki S., Maki T. (Eds) Int. Symp. on Ultrafine Grained Steels (ISUGS 2001), Fukuoka, Japan, pp. 84–87
11. D.S. Fields, W.A. Backofen: Proc. Am. Soc. Test. Mater., 1957, 75:1259–72
12. D.Q. Bai, S. Yue, W.P. Sun, J.J. Jonas: Metall. Mater. Trans. A, 1993, 24A:2151–5910.1007/BF02648589 ↗
13. A. Zarei-Hanzaki, R. Pandi, S. Yue, P.D. Hodgson: Metall. Trans. A, 1993, 24A:2657–6510.1007/BF02659490 ↗
14. W. Charnock, J. Nutting: Met. Sci. J., 1967,1:123–2710.1016/0036-9748(67)90027-0 ↗
15. P.J. Hurley, B.C. Muddle, P.D. Hodgson: Metall. Mater. Trans. A, 2001, 32A:1507–1710.1007/s11661-001-0238-z ↗
16. P.J. Hurley, B.C. Muddle, P.D. Hodgson: Metall. Mater. Trans. A, 2002, 33A:2985–9310.1007/s11661-002-0283-2 ↗
17. C.R. Killmore, G.R. Harris, and J.G. Williams: Proc. Int. Conf. on HSLA Steels, Wollongong, Australia, 1984, D.P. Dunne and T. Chandra, eds., ASM Location, Wollongong, Australia, 1984, pp. 57–63
18. C.R. Brooks: Principles of the Austenitization of Steels, 1st ed., Elsevier Science, New York, NY, 1992
19. J.G. Speer, S.S. Hansen: Metall. Trans. A, 1989, 20A:25–3810.1007/BF02647491 ↗
20. K.J. Irvine, F.B. Pickering, T. Gladman: J. Iron Steel Inst., 1967, 205:161–82
21. E.I. Poliak, J.J. Jonas: ISIJ Int., 2003, 43:684–70110.2355/isijinternational.43.684 ↗
22. D.A. Hughes, W.D. Nix: Mater. Sci. Eng. A, 1989, 122:153–7210.1016/0921-5093(89)90627-8 ↗
23. I. Tamura, H. Sekine, T. Tanaka, C. Ouchi: Thermomechanical Processing of High-Strength Low-Alloy Steels, 1st ed., Robert Hartnoll Ltd., Bodmin, Cornwall, 1988
24. R. Bengochea, B. Lopez, I. Gutierrez: ISIJ Int., 1999, 39:583–9010.2355/isijinternational.39.583 ↗
25. M. Hatherly: Proc. 6th Int. Conf. on Strength of Metals and Alloys, R.C. Gifkins, ed., Pergamon, Oxford, United Kingdom, 1982, pp. 1181–9510.1016/B978-1-4832-8423-1.50173-5 ↗
26. I. Tamura: in Thermec’88, I. Tamura, ed., ISIJ, Tokyo, 1988, vol. 1, pp. 1–10
27. M. Umemoto, A. Hiramatsu, A. Moriya, T. Watanabe, S. Nanba, N. Nakajima, G. Anan, and Y. Higo: ISIJ Int., 1992, vol. 32, pp. 306–1510.2355/isijinternational.32.306 ↗
28. A. Yoshi, M. Fujioka, H. Morikawa, and Y. Onoe: in Thermec’88, I. Tamura, ed., ISIJ, Tokyo, 1988, vol. 2, pp. 799–806
29. R. Priestner, E. de los Rios: Met. Technol., 1980, 7:309–1610.1179/030716980803287170 ↗
30. R.K. Amin and F.B. Pickering: in Thermomechanical Processing of Microalloyed Austenite, A.J. DeArdo, G.A. Ratz and P.J. Wray, eds., TMS-AIME, Warrendale, PA, 1982, pp. 377–403
31. R. Priestner, P.D. Hodgson: Mater. Sci. Technol., 1992, 8:849–5410.1179/mst.1992.8.10.849 ↗
32. H. Beladi, G.L. Kelly, A. Shokouhi, P.D. Hodgson: Mater. Sci. Eng. A, 2004, 371:343–5210.1016/j.msea.2003.12.024 ↗
33. A. Dehghan-Manshadi, H. Beladi, M.R. Barnett, P.D. Hodgson: Mater. Sci. Forum, 2004, 467–470:1163–68.10.4028/www.scientific.net/MSF.467-470.1163 ↗