Separation Mechanism of Primary Silicon from Hypereutectic Al-Si Melts Under Alternating Electromagnetic Fields
Source abstract
Abstract
Solar grade silicon (SOG-Si) and hypereutectic Al-Si alloys with low silicon (silicon composition below 25 pct) can be successfully obtained by separation of hypereutectic Al-Si alloy with high silicon (silicon composition above 30 pct) under an alternating electromagnetic field after post-processing. To explore the separation mechanism in detail, experiments were conducted in this study using a high-frequency induction furnace with different pulling conditions of the crucible which is loaded with Al-45 wt pct Si melt. Results demonstrate that the separation of hypereutectic Al-Si alloy is feasible through either a pull-up or drop-down process. The height of each separation interface between the compact and sparse parts of the primary silicon decrease as the pull-up distance rose. When the pulling rate is very low, resultant morphologies of compact primary silicon are rounded and polygonal, allowing for more effective separation of the primary silicon. A novel physical model is presented here based on the experimental results and simulation. The model can be used to effectively describe the separation mechanism of primary silicon from hypereutectic Al-Si melts under alternating electromagnetic fields.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Silicon and Solar Cell Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. T. Yoshikawa and K. Morita: J. Cryst. Growth, 2009, vol. 311, pp. 776-779.10.1016/j.jcrysgro.2008.09.095 ↗
2. K. Arafune, E. Ohishi, H. Sai, Y. Ohshita, and M. Yamaguchi: J. Cryst. Growth, 2007, vol. 308, pp. 5-9.10.1016/j.jcrysgro.2007.06.035 ↗
3. S. Zheng, W. Chen, J. Cai, J. Li, C. Chen, and X. Luo: Metall. Mater. Trans. B, 2010, vol. 41, pp. 1268-1273.10.1007/s11663-010-9422-0 ↗
4. J. Wu, Y. Dai, W Ma, B. Yang, D. Liu, Y. Wang, and K. Wei: Chin. J. Vac. Sci. Technol., 2010, vol. 1, pp. 43–49.
5. X. Gu, X. Yu, and D. Yang: Sep. Purif. Technol., 2011, vol. 77, pp. 33-39.10.1016/j.seppur.2010.11.016 ↗
6. K. Morita and T. Yoshikawa: T. Nonferr. Metal. Soc., 2011, vol. 21, pp. 685-690.10.1016/S1003-6326(11)60766-8 ↗
7. Y. Nishi, Y. Kang, and K. Morita: Mater. Trans., 2010, vol. 51, pp. 1227-1230.10.2320/matertrans.M2010001 ↗
8. T. Yoshikawa and K. Morita: ISIJ. Int., 2005, vol. 45, pp. 967-971.10.2355/isijinternational.45.967 ↗
9. J. Li, Z. Guo, H. Tang, Z. Wang, and S. Sun: T. Nonferr. Metal. Soc., 2012, vol. 22, pp. 958-963.10.1016/S1003-6326(11)61270-3 ↗
10. J. Jie, Q. Zou, H. Wang, J. Sun, Y. Lu, T. Wang, and T. Li: J. Cryst. Growth, 2014, vol. 399, pp. 43-48.10.1016/j.jcrysgro.2014.04.003 ↗
11. J. Jie, Q. Zou, J. Sun, Y. Lu, T. Wang, and T. Li: Acta Mater., 2014, vol. 72, pp. 57-66.10.1016/j.actamat.2014.03.031 ↗
12. S. Wang, L. Zhang, Y. Tian, Y. Li and H. Ling: Metall. Mater. Trans. B, 2014, vol. 45, pp. 1915-1935.10.1007/s11663-014-0107-y ↗
13. A. Noeppel, A. Ciobanas, X. Wang, K. Zaidat, N. Mangelinck, O. Budenkova, A. Weiss, G. Zi mmermann, and Y. Fautrelle: Metall. Mater. Trans. B, 2010, vol. 41, pp. 193-208.10.1007/s11663-009-9311-6 ↗
14. S. Eckert, P.A Nikrityuk, B. Willers, D. Räbiger, N. Shevchenko, H. Neumann-Heyme, V. Travnikov, S. Odenbach, A. Voigt, and K. Eckert: Eur. Phys. J.Spec. Top., 2013, vol. 220, pp. 123-137.10.1140/epjst/e2013-01802-7 ↗
15. C. Xu and Q. Jiang: Mater. Sci. Eng. A, 2006, vol. 437, pp. 451-455.10.1016/j.msea.2006.07.088 ↗
16. W. Wang, X. Bian, J. Qin, and S. Syliusarenko: Metall. Mater. Trans. A, 2000, vol. 31, pp. 2163-2168.10.1007/s11661-000-0134-y ↗
17. X. Bian and W. Wang: Mater. Lett., 2000, vol. 44, pp. 54-58.10.1016/S0167-577X(00)00011-2 ↗
18. Y. Zhang, H. Zheng, Y. Liu, L. Shi, R. Xu, and X. Tian: Acta Mater., 2014, vol. 70, pp. 162-173.10.1016/j.actamat.2014.01.061 ↗
19. W. Yu, G. LÜ, Y. REN, H. Xue and Y. Dai: Trans. Nonferrous. Met. Soc., 2013, vol. 23, pp. 3476-3481.10.1016/S1003-6326(13)62891-5 ↗
20. B. Korojy and H. Fredriksson: T. Indian Inst. Metals, 2009, vol. 62, pp. 361-365.10.1007/s12666-009-0066-1 ↗
21. M. W. Ullah and T. Carlberg: J. Cryst. Growth, 2011, vol. 318, pp. 212-218.10.1016/j.jcrysgro.2010.10.084 ↗
22. P. Kaur, D.K. Dwivedi, and P.M. Pathak: Int. J. Adv. Manuf. Tech., 2012, vol. 63, pp. 415-420.10.1007/s00170-012-3921-x ↗