journal article·2014-09

Abnormal Grain Growth in Austenite Structure Reversely Transformed from Ferrite/Pearlite-Banded Structure

Xianguang Zhang, Kiyotaka Matsuura, Munekazu Ohno

Publisher page

Abstract

The grain growth behavior of austenite reversely transformed from ferrite/pearlite (F/P)-banded and non-banded steels has been studied. It was found that the grain-coarsening temperature [the temperature at which abnormal grain growth (AGG) occurs] of the initially banded F/P structure is quite low compared with that of the non-banded sample. In the F/P-banded sample, the abnormal grains always originate from the former ferrite region. The occurrence of AGG is essentially attributable not to the austenite nucleation process during heating but to the grain growth process after the completion of austenizing. It was proposed that the lowered grain-coarsening temperature in the banded structure is due to the non-uniform pinning-effect of AlN precipitates between former ferrite and pearlite regions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. C.F. Jatczak, D.J. Glraldi, and E.S. Rowland: Trans. ASM, 1956, vol. 48, pp. 279-305.
2. P.G. Bastien: J. Iron Steel Inst., 1957, vol. 187, pp. 281-91.
3. J.S. Kirkaldy, J.von Destinon-Forstmann, and R.J. Brigham: Can. Metall. Q., 1962, vol. 1, pp. 59-81.10.1179/cmq.1962.1.1.59 ↗
4. J.S. Kirlcaldy, R.J. Brigham, H.A. Damian, and R.G. Ward: Can. Metall. Q., 1963, vol. 3, pp. 233-41.10.1179/cmq.1963.2.3.233 ↗
5. E.T. Turkdogan, and R.A. Grange: J. Iron Steel Inst., 1970, vol. 208, pp. 482-94.
6. R.G. Ward: J. Iron Steel Inst., 1965, vol. 203, pp. 930-32.
7. R.A. Grange: Metall. Trans., 1971, vol. 2, pp. 417-26.10.1007/BF02663328 ↗
8. S.W. Thompson, and P.R. Howell: Mater. Sci. Technol., 1992, vol. 8, pp. 777-84.10.1179/mst.1992.8.9.777 ↗
9. L.E. Samuels: Optical Microscopy of Carbon Steels, ASM, Materials Park, Ohio, 1980.
10. J.D. Verhoeven: J. Mater. Eng. Perform., 2000, vol. 9, pp. 286-95.10.1361/105994900770345935 ↗
11. R. Grossterlinden, R. Kawalla, U. Lotter, and H. Pircher: Steel Res., 1992, vol. 63, pp. 331-36.10.1002/srin.199200529 ↗
12. W.A. Spitzig: Metall. Trans. A, 1983, vol. 14A, pp. 271-82.10.1007/BF02651624 ↗
13. G. Krauss: Metall. Mater. Trans. A, 2001, vol. 32A, 861-77.10.1007/s11661-001-0344-y ↗
14. G. Krauss: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 781-92.10.1007/s11663-003-0084-z ↗
15. D. Chae, D.A. Koss, A.L. Wilson, and P.R. Howell: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 995-1005.10.1007/s11661-000-1017-y ↗
16. R.A. Jaramillo, M.T. Lusk, and M.C. Mataya: Acta Mater., 2004, vol. 52, pp.851-58.10.1016/j.actamat.2003.11.017 ↗
17. A.C. Stauffer, D.A. Koss, and J.B. Mckirgan: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1317-24.10.1007/s11661-004-0306-2 ↗
18. W. Xu, P.E.J. Rivera-Diaz-del-Castillo, and S. van der Zwaag: ISIJ Int., 2005, vol. 45, pp. 380-87.10.2355/isijinternational.45.380 ↗
19. I. Andersen, Ø. Grongand and N. Ryum: Acta Metall. Mater., 1995, vol. 43, pp. 2689-2700.10.1016/0956-7151(94)00489-5 ↗
20. T. Gladman: The Physical Metallurgy of Microalloyed Steels, Instute of Materials, London, 1997.
21. A.P. Gulyaev and L.N. Serebrennikov: Metalloved. Term. Obrab. Met. 1977, vol. 4, pp. 2-5.
22. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon Elsevier, New York, NY, 2004.
23. P.R. Rios: Acta Mater., 1997, vol. 45, pp. 1785-89.10.1016/S1359-6454(96)00284-4 ↗
24. J. Harase, R. Shimizu, and D.J. Dingley: Acta Metall., 1991, vol. 39, pp. 763-70.10.1016/0956-7151(91)90276-7 ↗
25. P. Lin, G. Palumbo, J. Harase, and K.T. Aust: Acta Mater., 1996, vol. 44, pp. 4677-83.10.1016/S1359-6454(96)00140-1 ↗
26. Y. Hayakawa, and J.A. Szpunar: Acta Mater., 1997, vol. 45, pp. 1285-95.10.1016/S1359-6454(96)00251-0 ↗
27. N. Rajmohan, J.A. Szpunar, and Y. Hayakawa: Acta Mater., 1999, vol. 47, pp. 2999-3008.10.1016/S1359-6454(99)00162-7 ↗
28. G. N. Hassold and D. J. Srolovitz: Scr. Metall. 1995, vol. 32, pp. 1541-47.10.1016/0956-716X(95)00022-N ↗
29. S.G. Kim, and Y. B. Park: Acta Mater. 2008, vol. 56, pp. 3739–53.10.1016/j.actamat.2008.04.007 ↗
30. Q. Yu, Y. Sun: Mater. Sci. Eng. A, 2006, vol. 420, pp. 34–38.10.1016/j.msea.2006.01.027 ↗
31. J.B. Gilmour, G.R. Purdy, and J.S. Kirkaldy: Metall. Trans., 1972, vol. 3, pp. 3213-22.10.1007/BF02661336 ↗
32. N. Doğan Ömer, G.M. Michal, and H.W. Kwon: Metall. Trans. A, 1992, vol. 23A, pp. 2121–29.10.1007/BF02646005 ↗
33. L.J. Cuddy and J.C. Raley: Metall. Mater. Trans. A, 1983, vol. 14A, pp. 1989-95.10.1007/BF02662366 ↗
34. O. Flores, and L. Martinez: J. Mater. Sci., 1997, vol. 32, pp. 5985 – 91.10.1023/A:1018667111981 ↗
35. J.M. Cabrera, A. Al Omer, and J.M. Prado: J. Mater. Sci., 1996, vol. 31, pp. 1303-09.10.1007/BF00353110 ↗
36. F.G. Wilson and T. Gladman: Int. Mater. Rev., 1988, vol. 33, pp. 221-86.10.1179/imr.1988.33.1.221 ↗
37. W.C. Leslie, R.L. Rickett, C.L. Dotson, and C.S. Walton: Trans. ASM, 1954, vol. 46, pp. 1470-97.
38. Y.X. Liu, Heat Treat. Met. (China), 2000, vol. 12, pp. 1-3.
39. M. Enomoto, C.L. White, and H.I. Aaronson: Metall. Trans. A, 1988, vol. 19A, pp. 1807-18.10.1007/BF02645149 ↗
40. S. Uhm, J. Moon, C. Lee, J. Yoon, B. Lee: ISIJ Int., 2004, vol. 44, pp. 1230–37.10.2355/isijinternational.44.1230 ↗
41. K. Lücke, and K. Detert: Acta Metall., 1957, vol. 5, pp. 628-37.10.1016/0001-6160(57)90109-8 ↗
42. J. W. Cahn: Acta Metall. Mater., 1962, vol. 10, pp. 789-98.10.1016/0001-6160(62)90092-5 ↗
43. M. Hillert: Acta Mater., 1999, vol. 47, pp. 4481-4505.10.1016/S1359-6454(99)00336-5 ↗
44. M.I. Mendelev, and D.J. Srolovitz: Acta Mater., 2001, vol. 49, pp. 589-97.10.1016/S1359-6454(00)00358-X ↗
45. S.J. Lee, Y.K. Lee: Mater. Des., 2008, vol. 29, pp. 1840–44.10.1016/j.matdes.2008.03.009 ↗
46. E. Teatum, K. Gsctmeidner, Jr., and J. Waber: U.S. Atomic Energy Commission Report No. LA-2345, 1960.
47. C. Bernhard, J. Reiter, and H. Presslinger: Metall. Mater. Trans. B, 2008, vol. 39B, pp. 885-95.10.1007/s11663-008-9197-8 ↗
48. J. Moon, J. Lee, and C. Lee: Mater. Sci. Eng. A, 2007, vol. 459, pp. 40–46.10.1016/j.msea.2006.12.073 ↗
49. K. Schwerdtfeger, A. Köthe, J.M. Rodriguez, and W. Bleck: Thin Slab Casting, vol. 1, pp. 33–48, EUR 19409/1 EN, Luxembourg, 2001.
50. A.A. Howe: Segregation and Phase Distribution During Solidification of Carbon, Alloy and Stainless Steels, EUR 13302, ECSC, Luxembourg, 1991, pp. 31–40.
51. W.M. Rainforth, M.P. Black, R.L. Higginson, E.J. Palmiere, I. Prabst, P. Warbichler, and F. Hofer: Acta Mater., 2002, vol. 50, pp. 735-747.10.1016/S1359-6454(01)00389-5 ↗
52. J.L. McCall and J.E. Boyd: Proceedings of the First Annual Technical Meeting of the International Metallographic Society, Denver, CO, 1969, pp. 153.
53. H. Ma, Y. Li: Mater. Sci. Eng. (China), 2002, vol. 20, pp. 328-30.
54. C.S. Smith: Trans. AIME, 1948, vol. 175, pp. 15-51.
55. T. Gladman: JOM, 1992, vol. 44, pp. 21-24.10.1007/BF03222321 ↗