journal article·2015-08Open access

Strengthening Mechanisms in Thermomechanically Processed NbTi-Microalloyed Steel

Andrii G. Kostryzhev, Olexandra O. Marenych, Chris R. Killmore, Elena V. Pereloma

Abstract

The effect of deformation temperature on microstructure and mechanical properties was investigated for thermomechanically processed NbTi-microalloyed steel with ferrite-pearlite microstructure. With a decrease in the finish deformation temperature at 1348 K to 1098 K (1075 °C to 825 °C) temperature range, the ambient temperature yield stress did not vary significantly, work hardening rate decreased, ultimate tensile strength decreased, and elongation to failure increased. These variations in mechanical properties were correlated to the variations in microstructural parameters (such as ferrite grain size, solid solution concentrations, precipitate number density and dislocation density). Calculations based on the measured microstructural parameters suggested the grain refinement, solid solution strengthening, precipitation strengthening, and work hardening contributed up to 32 pct, up to 48 pct, up to 25 pct, and less than 3 pct to the yield stress, respectively. With a decrease in the finish deformation temperature, both the grain size strengthening and solid solution strengthening increased, the precipitation strengthening decreased, and the work hardening contribution did not vary significantly.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. B. Dutta, C.M. Sellars: Mater. Sci. Tech., 1987, vol. 3, pp. 197 - 206.10.1179/mst.1987.3.3.197 ↗
2. O. Kwon, A.J. DeArdo: Acta Metall. Mater., 1991, vol. 39(4), pp. 529 - 538.10.1016/0956-7151(91)90121-G ↗
3. T. Gladman: The Physical Metallurgy of Microalloyed Steels, the Institute of Materials, Cambridge University Press, Cambridge, 1997.
4. R.W. Cahn: Physical Metallurgy, North-Holland Publishing, Amsterdam, 1970.
5. F.C. Frank and W.T. Read: Phys. Rev. Lett., 1950, vol. 79, pp. 722 – 723.
6. S.N. Prasad and D.S. Sarma: Mater. Sci. Eng. A, 2005, vol. 408, pp. 53 – 63.10.1016/j.msea.2005.06.018 ↗
7. J.K. Patel, B. Wilshire: J. Mater. Process. Tech., 2002, vol. 120, pp. 316–321.10.1016/S0924-0136(01)01130-X ↗
8. C.P. Reip, S. Shanmugam, R.D.K. Misra: Mater. Sci. Eng. A, 2006, vol. 424, pp. 307–317.10.1016/j.msea.2006.03.026 ↗
9. J. Irvine, T.N. Baker: Mater. Sci. Eng., 1984, vol. 64, pp. 123-134.10.1016/0025-5416(84)90079-X ↗
10. A. Bakkaloglu: Mater. Lett., 2002, vol. 56, pp. 200 – 209.10.1016/S0167-577X(02)00440-8 ↗
11. L.-Y. Lan, C.-L. Qiu, D.-W. Zhao, X.-H. Gao: J. Iron Steel Res. Int., 2011, vol. 18(2), pp. 57-63.10.1016/S1006-706X(11)60024-1 ↗
12. I. Olivares, M. Alanis, R. Mendoza, B. Campillo, J. A. Juarez-Islas: Ironmak. Steelmak., 2008, vol. 35, № 6, pp. 452 – 457.10.1179/174328108X318879 ↗
13. R. Wang, C. I. Garcia, M. Hua, K. Cho, H. Zhang, A. J. DeArdo: ISIJ Int., 2006, vol. 46 (9), pp. 1345–1353.10.2355/isijinternational.46.1345 ↗
14. R.D.K. Misra, K.K. Tenneti, G.C. Weatherly, G. Tither: Metall. Mater. Trans. A, 2003, vol. 34, pp. 2341 – 2351.10.1007/s11661-003-0297-4 ↗
15. D. Williams and C.B. Carter: Transmission Electron Microscopy, II—Diffraction, Plenum Press, New York, NY, 1996, pp. 321–23.10.1007/978-1-4757-2519-3 ↗
16. E.V. Pereloma and J.D. Boyd: Mater. Sci. Tech., 1996, vol. 12, pp. 808-817.10.1179/mst.1996.12.10.808 ↗
17. A.J. Craven, K. He, L.A. Garvie, T.N. Baker: Acta Mater., 2000, vol. 48, pp. 3857 – 3868.10.1016/S1359-6454(00)00194-4 ↗
18. E.V. Pereloma, B.R. Crawford and P.D. Hodgson: Mater. Sci. Eng. A, 2001, vol. 299, pp. 27–37.10.1016/S0921-5093(00)01423-4 ↗
19. R.D.K. Misra, H. Nathani, J.E. Hartmann, F. Siciliano: Mater. Sci. Eng. A, 2005, vol. 394, pp. 339–352.10.1016/j.msea.2004.11.041 ↗
20. A.G. Kostryzhev, M. Strangwood and C.L. Davis: Mater. Technol., 2007, vol. 22, № 3, p. 166 – 172.10.1179/175355507X236650 ↗
21. H. R. Wang, W. Wang: J. Mater. Sci., 2009, vol. 44, pp. 591–600.10.1007/s10853-008-3069-0 ↗
22. M. Gomez, P. Valles, S. F. Medina: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4761–4773.10.1016/j.msea.2011.02.087 ↗
23. F. Yin, T. Hanamura, O. Umezawa, K. Nagai: Mater. Sci. Eng. A, 2003, vol. 354, pp. 31 – 39.10.1016/S0921-5093(02)00766-9 ↗
24. H. Yu, Y. Kang, H. Dong: J. Univ. Sci. Technol. B., 2006, vol. 13 (5), pp. 406 – 410.10.1016/S1005-8850(06)60082-0 ↗
25. H.-J. Kestenbach, S. S. Campos and E. V. Morales: Mater. Sci. Tech., 2006, vol 22, № 6, pp. 615- 626.10.1179/026708306X81487 ↗
26. A.G. Kostryzhev, M. Strangwood, and C.L. Davis: Mater. Manuf. Process., 2010, vol. 25, № 1-3, pp. 41 – 47.10.1080/10426910903202542 ↗
27. A.G. Kostryzhev, A. Al Shahrani, C. Zhu, S. P. Ringer and E. V. Pereloma: Mater. Sci. Eng. A, 2013, vol. 581, pp. 16-25.10.1016/j.msea.2013.05.068 ↗
28. D.T. Llewellyn, R.C. Hudd, Steels: Metallurgy and Application, Butterworth-Heinemann, Oxford, 1998.
29. B. Dutta, E.J. Palmiere and C. M. Sellars: Acta Mater., 2001, vol. 49, pp. 785-794.10.1016/S1359-6454(00)00389-X ↗
30. S. G. Hong, K.B. Kang and C.G. Park: Scripta Mater., 2002, vol. 46, pp. 163-168.10.1016/S1359-6462(01)01214-3 ↗
31. E.V. Pereloma, A.G. Kostryzhev, A. AlShahrani, C. Zhu, J.M. Cairney, C.R. Killmore and S.P. Ringer: Scripta Mater., 2014, vol. 75, pp. 74 – 77.10.1016/j.scriptamat.2013.11.026 ↗
32. A. Shahrani, T. Schambron, A. Dehghan-Manshadi, J. Williams, E. Pereloma: Mater. Sci. Forum, 2010, vol. 654-656, pp. 298 - 301.10.4028/www.scientific.net/MSF.654-656.298 ↗
33. A.G. Kostryzhev, M. Strangwood, and C.L. Davis: Metall. Mater. Trans. A, 2010, vol. 42, № 10, pp. 3170 – 3177.
34. I.B. Timokhina, P.D. Hodgson, and E.V. Pereloma: Metall. Mater. Trans. A, 2007, vol. 38, pp. 2442-2454.10.1007/s11661-007-9258-7 ↗
35. D. Akama, N. Nakada, T. Tsuchiyama, S. Takaki, A. Hironaka: Scripta Mater., 2014, vol. 82, pp. 13 – 16.10.1016/j.scriptamat.2014.03.012 ↗
36. Y. W. Kim, J. H. Kim, S.-G. Hong, C. S. Lee: Mater. Sci. Eng. A, 2014, vol. 605, pp. 244–252.10.1016/j.msea.2014.03.054 ↗
37. H.G. Hillenbrand, E. Amoris, K.A. Niederhoff, C. Perdrix, A. Streißelberger, and U. Zeislmair: EUROPIPE, GmbH, www.europipe.de, 1995.
38. I. B. Timokhina, M. Enomoto, M.K. Miller, and E.V. Pereloma: Metall. Mater. Trans. A, 2012, vol. 43 (7), pp. 2473-2483.10.1007/s11661-012-1106-8 ↗
39. D.J. Dingly and D. McLean: Acta Metall., 1967, vol. 15, pp. 885 – 901.10.1016/0001-6160(67)90371-9 ↗
40. Q. Yu, Z. Wang, X. Liu, G. Wang: Mater. Sci. Eng. A, 2004, vol. 379, pp. 384–390.10.1016/j.msea.2004.03.022 ↗
41. E. C. Bain, H. W. Paxton: Alloying Elements in Steel, American Society for Metals, Metals Park, OH, 1961.
42. G.K. Tirumalasetty, M.A. van Huis, C.M. Fang, Q. Xu, F.D. Tichelaar, D.N. Hanlon, J. Sietsma, H.W. Zandbergen: Acta Mater., 2011, vol. 59, pp. 7406–7415.10.1016/j.actamat.2011.08.012 ↗
43. E. Courtois, T. Epicier, C. Scott: Micron, 2006, vol. 37, pp. 492–502.10.1016/j.micron.2005.10.009 ↗
44. D.H.R. Fors and G. Wahnström: Phys. Rev. B, 2010, vol. 82, paper 195410.
45. E.V. Morales, J. Gallego, H.-J. Kestenbach: Phil. Mag. Lett., 2003, vol. 83, pp. 79–87.10.1080/0950083021000056632 ↗
46. D. N. Seidman, E. A. Marquis, D. C. Dunand: Acta Mater., 2002, vol. 50, pp. 4021–4035.10.1016/S1359-6454(02)00201-X ↗
47. A.S. Argon: in Mechanical Properties of Single-Phase Crystalline Media: Deformation at Low Temperature, R.W. Cahn and P. Haasen, eds., Physical Metallurgy, North-Holland Publishing, Amsterdam, 1996.10.1016/B978-044489875-3/50026-0 ↗
48. S.H. Hashemi: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1648–1655.10.1016/j.msea.2010.10.089 ↗
49. W.K. Kim, H.G. Jung, G.T. Park, S.U. Koh, K.Y. Kim: Scripta Mater., 2010, vol. 62, pp. 195 – 198.10.1016/j.scriptamat.2009.10.028 ↗
50. T.A. Kals, R. Eckestein: J. Mater. Process. Tech., 2000, vol. 103, pp. 95 – 101.10.1016/S0924-0136(00)00391-5 ↗
51. Y.H. Zhao, Y.Z. Guo, Q. Wei, A.M. Dangelewicz, C. Xu, Y.T. Zhu, T.G. Langdon, Y.Z. Zhou and E.J. Lavernia: Scripta Mater., 2008, vol. 59, pp. 627 – 630.10.1016/j.scriptamat.2008.05.031 ↗
52. T.N. Goh and H.M. Shang: J. Mech. Work. Technol., 1982, vol. 7, pp. 23-37.10.1016/0378-3804(82)90092-4 ↗
53. He Kejian,T. N. Baker: Mater. Sci. Eng. A 169 (1993) 53-65.10.1016/0921-5093(93)90598-9 ↗
54. A.G. Kostryzhev: Ph.D. Thesis, University of Birmingham, 2009, http://etheses.bham.ac.uk/436/.
55. M. Charleux, W.J.Poole, M. Militzer, A. Deschamps: Metall. Mater. Trans. A 32 (2001) 1635 - 1647.10.1007/s11661-001-0142-6 ↗
56. H-L. Yi, L-X. Du, G-D. Wang, X-H. Liu: J. Iron Steel Res. Int., 2008, vol. 15(2), pp. 76-80.10.1016/S1006-706X(08)60036-9 ↗