Correlating Scatter in Fatigue Life with Fracture Mechanisms in Forged Ti-6242Si Alloy
Source abstract
Abstract
Unlike the quasi-static mechanical properties, such as strength and ductility, fatigue life can vary significantly (by an order of magnitude or more) for nominally identical material and test conditions in many materials, including Ti-alloys. This makes life prediction and management more challenging for components that are subjected to cyclic loading in service. The differences in fracture mechanisms can cause the scatter in fatigue life. In this study, the fatigue fracture mechanisms were investigated in a forged near-α titanium alloy, Ti-6Al-2Sn-4Zr-2Mo-0.1Si, which had been tested under a condition that resulted in life variations by more than an order of magnitude. The crack-initiation and small crack growth processes, including their contributions to fatigue life variability, were elucidated via quantitative characterization of fatigue fracture surfaces. Combining the results from quantitative tilt fractography and electron backscatter diffraction, crystallography of crack-initiating and neighboring facets on the fracture surface was determined. Cracks initiated on the surface for both the shortest and the longest life specimens. The facet plane in the crack-initiating grain was aligned with the basal plane of a primary α grain for both the specimens. The facet planes in grains neighboring the crack-initiating grain were also closely aligned with the basal plane for the shortest life specimen, whereas the facet planes in the neighboring grains were significantly misoriented from the basal plane for the longest life specimen. The difference in the extent of cracking along the basal plane can explain the difference in fatigue life of specimens at the opposite ends of scatter band.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · High-Velocity Impact and Material Behavior · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. J.Z. Yi, Y.X. Gao, P.D. Lee, H.M. Flower, and T.C. Lindley: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1879-1890.10.1007/s11661-003-0153-6 ↗
2. H. Y. Kim, T. R. Marrero, H. K. Yasuda, and O. A. Pringle: J. Biomed. Mater. Res., 1999, vol. 48, pp. 297–300.10.1002/(SICI)1097-4636(1999)48:3<297::AID-JBM13>3.0.CO;2-H ↗
3. F.A. Bastenaire: Probabilistic Aspects of Fatigue, ASTM STP 511, American Society for Testing and Materials, 1972, pp. 3–28.10.1520/STP35402S ↗
4. F. Morel, and L. Flacelière: Int. J. Fatigue, 2005, vol. 27, pp. 1089–1101.10.1016/j.ijfatigue.2005.01.009 ↗
5. S. Hanaki, M. Yamashita, H. Uchida, and M. Zako: Int. J. Fatigue, 2010, vol. 32, pp. 605–609.10.1016/j.ijfatigue.2009.06.001 ↗
6. S.K. Jha, M.J. Caton, and J.M. Larsen: Mater. Sci. Eng. A, 2007, vol. 468–470, pp. 23–32.10.1016/j.msea.2006.10.171 ↗
7. S.K. Jha, M.J. Caton, and J.M. Larsen: Superalloys 2008, TMS, Warrendale, PA, 2008, pp. 565–72.10.7449/2008/Superalloys_2008_565_572 ↗
8. M.J. Caton, and S.K. Jha: Int. J. Fatigue, 2010, vol. 32, pp. 1461–1472.10.1016/j.ijfatigue.2010.01.015 ↗
9. Michael D. Sangid, Hans J. Maier, Huseyin Sehitoglu: J. Mech. Phys. Solids, 2011, vol. 59, pp. 595–609.10.1016/j.jmps.2010.12.014 ↗
10. S.K. Jha, J.M. Larsen, A.H. Rosenberger, and G.A. Hartman: Scr. Mater., 2003, vol. 48, pp. 1637–1642.10.1016/S1359-6462(03)00132-5 ↗
11. S.K. Jha, R. John, and J.M. Larsen: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2675-2684.10.1007/s11661-009-9931-0 ↗
12. Sushant K. Jha, Christopher J. Szczepanski, Patrick J. Golden, William J. Porter III, and Reji John: Int. J. Fatigue, 2012, vol. 42, pp. 248–257.10.1016/j.ijfatigue.2011.11.017 ↗
13. Sushant K. Jha, Christopher J. Szczepanski, Reji John and James M. Larsen: Acta Mater., 2015, vol. 82, pp. 378–395.10.1016/j.actamat.2014.08.034 ↗
14. S. Jha, A. Pilchak, C. Szczepanski, V. Sinha, R. John, and J. Larsen: in Ti-2015: Proceedings of the 13th World Conference on Titanium, TMS, Warrendale, PA, 2016, pp. 1581–86.10.1002/9781119296126.ch265 ↗
15. “Fatigue Data Sheet”, Titanium alloy—NIMS Fatigue Data Sheet No. 98, NIMS Materials Database. http://mits.nims.go.jp/index_en.html (accessed August 12th, 2016).
16. Knobbe H, Köster P, Christ HJ, Fritzen CP, and Riedler M, Proced. Eng., 2010, 2:931–94010.1016/j.proeng.2010.03.101 ↗
17. T. Marquet and A. Struzik: Application of Damage Tolerance Principles for Improved Airworthiness of Rotorcraft, RTO Meeting Proceedings 24, 2000, pp. (15-1)–(15-13), http://www.dtic.mil/dtic/tr/fulltext/u2/a389234.pdf (accessed August 17th, 2016).
18. Fatigue, Fail-Safe, and Damage Tolerance Evaluation of Metallic Structure for Normal, Utility, Acrobatic, and Commuter Category Airplanes. AC 23-13A, Advisory Circular, Federal Aviation Administration, 2005. http://www.faa.gov/documentLibrary/media/Advisory_Circular/ac23-13A.pdf (accessed August 15th, 2016).
19. J.A. Harris, Jr.: AFWAL-TR-87-4069, Engine Component Retirement for Cause, 1987, vol. 1.
20. Gerald T. Cashman: Int. J. Fatigue, 2010, vol. 32, pp. 492–496.10.1016/j.ijfatigue.2009.04.018 ↗
21. Gerald T. Cashman: J. Eng. Mater. Technol., 2007, vol. 129, pp. 293-303.10.1115/1.2712468 ↗
22. Gerald T. Cashman: J. Eng. Mater. Technol., 2007, vol. 129, pp. 159-168.10.1115/1.2401619 ↗
23. Fei Cao, Pankaj Kumar, Mark Koopman, Chenluh Lin, Z. Zak Fang, and K.S. Ravi Chandran: Mater. Sci. Eng., A, 2015, vol. 630, pp. 139–145.10.1016/j.msea.2015.02.028 ↗
24. K.S. Ravi Chandran, P. Chang, and G.T. Cashman: Int. J. Fatigue, 2010, vol. 32, pp. 482–491.10.1016/j.ijfatigue.2009.08.004 ↗
25. V. Sinha, M.J. Mills, and J.C. Williams: in Lightweight Alloys for Aerospace Applications, K. Jata, E.W. Lee, W. Frazier, and N.J. Kim, eds., TMS, 2001, pp. 194–207.
26. S. Ghosh, M. Mills, S. Rokhlin, V. Sinha, W. Soboyejo, and J. Williams: The Evaluation of Cold Dwell Fatigue in Ti-6242, Final Report, Federal Aviation Administration, DOT/FAA/AR-06/24, 2007, pp. (B-1)–(B-4), http://www.tc.faa.gov/its/worldpac/techrpt/ar0624.pdf (accessed August 15th, 2016).
27. A.R. Shiveley, P.A. Shade, A.L. Pilchak, J.S. Tiley, R. Kerns: J. Microsc., 2011, vol. 244, pp. 181-186.10.1111/j.1365-2818.2011.03524.x ↗
28. A.L. Pilchak, A.R. Shiveley, J.S. Tiley, D.L. Ballard: J. Microsc., 2011, vol. 244, pp. 38-44.10.1111/j.1365-2818.2011.03496.x ↗
29. A.L. Pilchak, J. Shank, J.C. Tucker, S. Srivatsa, P.N. Fagin, and S.L. Semiatin, Integr. Mater. Manuf. Innov., 2016, 5:14. https://doi.org/10.1186/s40192-016-0056-1.10.1186/s40192-016-0056-1 ↗
30. Dataset archived on the NIST repository. http://hdl.handle.net/11256/647.
31. D. Phifer, L. Tuma, T. Vystavel, P. Wandrol, and R.J. Young, “Improving SEM Imaging Performance Using Beam Deceleration”, Microscopy Today, Vol. 17, Issue 04, pp. 40-48, 2009.10.1017/S1551929509000170 ↗
32. Ilona Müllerová and Ludĕk Frank, “Scanning Low-Energy Electron Microscopy”, Advances in Imaging and Electron Physics, Vol. 128, pp. 309-443, 2003.10.1016/S1076-5670(03)80066-6 ↗
33. Damian J. Dingley, Stuart I. Wright, and Matthew M. Nowell: Microsc. Microanal., 2005, vol. 11(Suppl 2), pp. 528-529.
34. J. Miao, T.M. Pollock and J.W. Jones: Acta Mater., 2009, vol. 57, pp. 5964-5974.10.1016/j.actamat.2009.08.022 ↗
35. J. Miao, T.M. Pollock, and J.W. Jones: Superalloys 2008, TMS, Warrendale, PA, 2008, pp. 589–97.10.7449/2008/Superalloys_2008_589_597 ↗
36. F. Bridier, P. Villechaise, and J. Mendez, “Slip and fatigue crack formation processes in an α/β titanium alloy in relation to crystallographic texture on different scales”, Acta Mater. 56 (2008) 3951–3962.10.1016/j.actamat.2008.04.036 ↗
37. G. Themelis, S. Chikwembani, and J. Weertman: Mater. Charact., 1990, vol. 24, pp. 27-40.10.1016/1044-5803(90)90069-V ↗
38. V. Sinha, M.J. Mills, and J.C. Williams: J. Mater. Sci., 2007, vol. 42, no. 19, pp. 8334-8341.10.1007/s10853-006-0252-z ↗
39. N. Gey, P. Bocher, E. Uta, L. Germain, and M. Humbert, “Texture and microtexture variations in a near-α titanium forged disk of bimodal microstructure”, Acta Materialia 60 (2012) 2647–2655.10.1016/j.actamat.2012.01.031 ↗
40. Y.J. Ro, S.R. Agnew, and R.P. Gangloff: Scr. Mater., 2005, vol. 52, pp. 531-536.10.1016/j.scriptamat.2004.10.040 ↗
41. F.J. Humphreys, J. Mater. Sci., 2001, vol. 36, pp. 3833-3854.10.1023/A:1017973432592 ↗
42. Masayuki Kamaya, Ultramicroscopy, 2011, vol. 111, pp. 1189-1199.10.1016/j.ultramic.2011.02.004 ↗
43. M.F. Savage: Ph.D. Dissertation, The Ohio State University, Columbus, OH, 2000.
44. V. Sinha, J.E. Spowart, M.J. Mills, and J.C. Williams: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1507-1518.10.1007/s11661-006-0095-x ↗
45. V. Sinha, S.K. Jha, R. Wheeler, A.L. Pilchak, R. John, and J.M. Larsen: in Ti-2015: Proceedings of the 13th World Conference on Titanium, TMS, Warrendale, PA, 2016, pp. 821–26.10.1002/9781119296126.ch140 ↗
46. P.J.E. Forsyth: Crack Propagation, Proceedings of Cranfield Symposium, England: College of Aeronautics, 1962, pp. 76–94.
47. S. Suresh: Fatigue of Materials, Second Edition, Cambridge University Press, Cambridge, UK, 1998, pp. 335-337.10.1017/CBO9780511806575 ↗
48. G. Lütjering and J.C. Williams: Titanium, 2nd edition, Springer-Verlag, Berlin, Germany, 2007, p. 17.
49. G. Lütjering and J.C. Williams: Titanium, 2nd edition, Springer-Verlag, Berlin, Germany, 2007, p. 21.
50. M. Peters, A. Gysler, and G. Lütjering: Metall. Trans. A, 1984, vol. 15A, pp. 1597-1605.10.1007/BF02657799 ↗
51. W.J. Evans, J.P. Jones, and M.T. Whittaker, Int. J. Fatigue, 2005, vol. 27, pp. 1244-1250.10.1016/j.ijfatigue.2005.06.045 ↗