journal article·2016-05

Characterization of Steel-Ta Dissimilar Metal Builds Made Using Very High Power Ultrasonic Additive Manufacturing (VHP-UAM)

Niyanth Sridharan, Mark Norfolk, Sudarsanam Suresh Babu

Publisher page

Abstract

Ultrasonic additive manufacturing is a solid-state additive manufacturing technique that utilizes ultrasonic vibrations to bond metal tapes into near net-shaped components. The major advantage of this process is the ability to manufacture layered structures with dissimilar materials without any intermetallic formation. Majority of the published literature had focused only on the bond formation mechanism in Aluminum alloys. The current work pertains to explain the microstructure evolution during dissimilar joining of iron and tantalum using very high power ultrasonic additive manufacturing and characterization of the interfaces using electron back-scattered diffraction and Nano-indentation measurement. The results showed extensive grain refinement at the bonded interfaces of these metals. This phenomenon was attributed to continuous dynamic recrystallization process driven by the high strain rate plastic deformation and associated adiabatic heating that is well below 50 pct of melting point of both iron and Ta.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Dehoff R.R, and S. S. Babu, Acta Materialia 58.13 (2010): 4305-4315.10.1016/j.actamat.2010.03.006 ↗
2. Fujii T, M. R. Sriraman, and S. S. Babu, Metallurgical and Materials Transactions A 42.13 (2011): 4045-4055.10.1007/s11661-011-0805-x ↗
3. Hopkins C. D, Wolcott P.J, Dapino M.J, Truog A.G, Babu S.S, and Fernandez S.A, Journal of Engineering Materials and Technology 134 (2012):011004.10.1115/1.4005269 ↗
4. Kulakov M, and H.J. Rack, J. Eng. Mater. Technol. 131 (2009): 021006.10.1115/1.3078303 ↗
5. Ram GD Janaki, Y.Yang, and B.E.Stucker, Journal of Manufacturing Systems 25.3 (2006): 221-238.10.1016/S0278-6125(07)80011-2 ↗
6. Joshi C, Welding Journal 50(1971): 840-848.
7. K. Johnson, H.C. Edmonds, R.L. Higginson, and Harris R.A.: in Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications (2011): 0954420711413656.
8. D.E. Schick: Dissertation, The Ohio State University, Columbus, 2009.
9. M.R. Sriraman, S.S. Babu, and M. Short, Scripta Mater. 62 (2010):560–63.10.1016/j.scriptamat.2009.12.040 ↗
10. Sato Y.S, Kokawa H, Ikeda K, Enomoto M, Hashimoto T, and Jogan S, Metallurg. Mater. Trans. A 32 (2001): 941–48.10.1007/s11661-001-0351-z ↗
11. Raabe D, Schlenkert G, Weisshaupt H, and Lücke K, Mater. Sci. Technol. 10 (1994): 299–305.10.1179/mst.1994.10.4.299 ↗
12. Mironov S, Y.S. Sato, and H Kokawa, Acta Mater. 56 (2008): 2602-2614.10.1016/j.actamat.2008.01.040 ↗
13. Lins J.F.C, Sandim H.R.Z, Kestenbach H.J, Raabe D. and Vecchio K.S, Mater. Sci. Eng. A 457 (2007):205-218.10.1016/j.msea.2006.12.019 ↗
14. Meyers M.A, Chen Y.J, Marquis F.D.S, and Kim D.S, Metallurg. Mater. Trans. A 26 (1995):2493-2501.10.1007/BF02669407 ↗
15. Wei Q, Pan Z.L, Wu X. L, Schuster B.E, Kecskes L.J, and Valiev R.Z.: Acta Mater. 59(2011):2423-2436.10.1016/j.actamat.2010.12.042 ↗
16. Valiev R.Z, Estrin Y., Horita Z, Langdon T.G, Zechetbauer M.J, & Zhu Y.T, JOM 58 (2006): 33-39.10.1007/s11837-006-0213-7 ↗
17. Trueb F, Metallurg. Trans. 2(1971): 145-153.10.1007/BF02662650 ↗
18. Oliver Warren Carl, and George Mathews Pharr, Journal of materials research 7.06 (1992): 1564-1583.10.1557/JMR.1992.1564 ↗
19. Greenberg, B.A, M.A.Ivanov, V.V.Rybin, A.V.Inozemtsev, O.V.Antonova, O.A.Elkina, A.M.Patselov, S.V.Kuz’min, V.I.Lysak, and V.E.Kozhevnikov, The Physics of Metals and Metallography 113.2 (2012): 176-189.10.1134/S0031918X12020056 ↗
20. Jahn R, Cooper R, and Wilkosz D, Metallurg. Mater. Trans. A 38 (2007): 570-583.10.1007/s11661-006-9087-0 ↗
21. Kang JY, Kim DI, Oh KH, and Lee HC, Mater. Sci. Forum. 467(2004):69-74.10.4028/www.scientific.net/MSF.467-470.69 ↗
22. R.D. Doherty, D.A. Hughes, F.J Humphreys, J.J Jonas, D. Juul, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett, Mater. Sci. Eng. A 238 (1997): 219-274.10.1016/S0921-5093(97)00424-3 ↗
23. Hughes D.A., and N. Hansen, Acta Mater. 45 (1997): 3871-3886.10.1016/S1359-6454(97)00027-X ↗
24. Oliver, W.C, and Pharr G.M. Journal of materials research 19 (2004): 3-20.10.1557/jmr.2004.19.1.3 ↗
25. D.A. Rigney, L.H. Chen, G. Malcolm, S. Naylor, and A.R. Rosenfield, Wear 100 (1984): 195–219.10.1016/0043-1648(84)90013-9 ↗
26. Foster, D. R., Taber, G. A., Babu, S. S., & Daehn, G. S. (2014). Science and Technology of Welding and Joining, 19(2), 157–63.10.1179/1362171813Y.0000000175 ↗
27. Xia Changqing, and Zhanpeng Jin, Surface and Coatings Technology 130.1 (2000): 29–32.10.1016/S0257-8972(00)00684-8 ↗
28. Watanabe, Takehiko, Atsushi Yanagisawa, and Shiro Sunaga, Metallurgical and Materials Transactions A 34.5 (2003): 1107–11.10.1007/s11661-003-0130-0 ↗
29. Kong C.Y, R.C. Soar, and P.M. Dickens, J. Mater. Process. Technol. 146 (2004): 181-187.10.1016/j.jmatprotec.2003.10.016 ↗
30. Zerilli Frank. J, and Ronald.W.Armstrong, Journal of Applied Physics 68.4 (1990): 1580-1591.10.1063/1.346636 ↗
31. Derby B.: Acta Metallurg. Mater. 39 (1991): 955-962.10.1016/0956-7151(91)90295-C ↗
32. Perez-Prado M.T, J.A. Hines, and K.S. Vecchio, Acta Mater. 49 (2001): 2905-2917.10.1016/S1359-6454(01)00215-4 ↗
33. Raabe D., Zhao Z, Park S.J, and Roters F, Acta Mater. 50 (2002): 421-440.10.1016/S1359-6454(01)00323-8 ↗
34. Hutchinson B.: Philos. Trans. R. Soc. Lond. Ser. A 357 (1999): 1471-1485.10.1098/rsta.1999.0385 ↗
35. Park JT, and JA Szpunar, Acta Mater. 51 (2003): 3037-3051.10.1016/S1359-6454(03)00115-0 ↗
36. S.H. Lee and D.N. Lee, Mater. Sci. Eng. A 249 (1998): 84-90.10.1016/S0921-5093(98)00588-7 ↗