journal article·2015-02Open access

Microstructure and Interfacial Reactions During Vacuum Brazing of Stainless Steel to Titanium Using Ag-28 pct Cu Alloy

A. Laik, A. A. Shirzadi, G. Sharma, R. Tewari, T. Jayakumar, G. K. Dey

Abstract

Abstract Microstructural evolution and interfacial reactions during vacuum brazing of grade-2 Ti and 304L-type stainless steel (SS) using eutectic alloy Ag-28 wt pct Cu were investigated. A thin Ni-depleted zone of $$\alpha $$-Fe(Cr, Ni) solid solution formed on the SS-side of the braze zone (BZ). Cu from the braze alloy, in combination with the dissolved Fe and Ti from the base materials, formed a layer of ternary compound $$\tau _2$$, adjacent to Ti in the BZ. In addition, four binary intermetallic compounds, Cu$$_3$$Ti$$_2$$, Cu$$_4$$Ti$$_3$$, CuTi and CuTi$$_2$$ formed as parallel contiguous layers in the BZ. The unreacted Ag solidified as islands within the layers of Cu$$_3$$Ti$$_2$$ and Cu$$_4$$Ti$$_3$$. Formation of an amorphous phase at certain locations in the BZ could be revealed. The $$\beta $$-Ti(Cu) layer, formed due to diffusion of Cu into Ti-based material, transformed to an $$\alpha $$-Ti + CuTi$$_2$$ eutectoid with lamellar morphology. Tensile test showed that the brazed joints had strength of 112 MPa and failed at the BZ. The possible sequence of events that led to the final microstructure and the mode of failure of these joints were delineated.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. A. Shapiro, A. Rabinkin, Weld. J. 83, 36–43 (2003)
2. S. Kundu, M. Ghosh, A. Laik, K. Bhanumurthy, G.B. Kale, S. Chatterjee, Mater. Sci. Eng. A 407, 36–43 (2005)10.1016/j.msea.2005.07.010 ↗
3. M.M. Cheepu, V. Muthupandi, S. Loganathan, Mater. Sci. Forum 710, 620–25 (2012)10.4028/www.scientific.net/MSF.710.620 ↗
4. A. Fiji, T.H. North, K. Ameyama, M. Futamata, Mater. Sci. Technol. 8, 219–35 (1992)10.1179/mst.1992.8.3.219 ↗
5. U.K. Mudali, B.M.A. Rao, K. Shanmugam, R. Natarajan, B. Raj, J. Nucl. Mater. 321, 40–48 (2003)10.1016/S0022-3115(03)00194-6 ↗
6. B. Raj, U.K. Mudali, Prog. Nucl. Energy 48, 283–313 (2006)10.1016/j.pnucene.2005.07.001 ↗
7. M.M. Schwartz, Brazing (ASM International, Materials Park, OH, 2003)
8. M.M. Schwartz, Ceramic Joining (ASM International, Materials Park, OH, 1990)
9. G. Humpston, D.M. Jacobson, Principles of Soldering and Brazing (ASM International, Materials Park, OH, 1993)
10. A. Laik, A.A. Shirzadi, R. Tewari, A. Kumar, T. Jayakumar, G.K. Dey, Metall. Mater. Trans A 44A, 2212–15 (2013)10.1007/s11661-012-1599-1 ↗
11. J.G. Lee, S.J. Hong, M. Lee, C. Rhee, Scripta Mater. 395, 145–49 (2009)
12. X. Yue, P. He, J.C. Zhang, F.Q. Zhu, Mater Charact. 59, 1721–27 (2008)10.1016/j.matchar.2008.03.014 ↗
13. A. Elrefaey, W. Tillmann, Metall. Mater. Trans. A 38A, 2956–62 (2007)10.1007/s11661-007-9357-5 ↗
14. A. Elrefaey, W. Tillmann, J. Mater. Sci. 42, 9553–58 (2007)10.1007/s10853-007-1935-9 ↗
15. A. Elrefaey, W. Tillmann, J. Alloys Compd. 487, 639–45 (2009)10.1016/j.jallcom.2009.08.029 ↗
16. A. Elrefaey, W. Tillmann, J. Mater. Sci. 45, 4332–38 (2010)10.1007/s10853-010-4357-z ↗
17. J.G. Lee, J.K. Lee, S.M. Hong, M.K. Lee, C.K. Rhee, J. Mater. Sci. 45, 6837–40 (2010)10.1007/s10853-010-4923-4 ↗
18. M.K. Lee, J.G. Lee, Y.H. Choi, D.W. Kim, C.K. Rhee, Y.B. Lee, S.J. Hong, Mater. Lett. 64, 1105–08 (2010)10.1016/j.matlet.2010.02.024 ↗
19. R.K. Shiue, S.K. Wu, F.Y. Chen, T.E. Yang, Metall. Mater. Trans A 43A, 1742–46 (2012)10.1007/s11661-012-1143-3 ↗
20. A. Shafiei, P. Abachi, K. Dehghani, K. Pourazarang, Mater. Manuf. Proc. 25, 1333–40 (2010)10.1080/10426914.2010.523911 ↗
21. V. Raghavan, J. Phase Equilib. 23, 172–74 (2002)10.1361/1054971023604152 ↗
22. H. Bo, L.I. Duarte, W.J. Zhu, L.B. Liu, H.S. Liu, Z.P. Jin, C. Leinenbach, CALPHAD 40, 24–33 (2013)10.1016/j.calphad.2012.12.001 ↗
23. O. Kubaschewski: in Ternary Alloys: A comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, G. Petzow, G. Effenberg, eds., Wiley, Weinheim, 1988, vol. 1, pp. 557–62
24. O. Kubaschewski: in Ternary Alloys: A Comprehensive Compendium of Evaluated Constitutional Data and Phase Diagrams, G. Petzow, G. Effenberg, eds., Wiley, Weinheim, 1988, vol. 1, pp. 596–604
25. H. Tas, P. Lemaitre, J. Dekeyser, W. Vandermeulen, F.D. Schutter, Fusion Eng. Des. 14, 321–28 (1991)10.1016/0920-3796(91)90015-I ↗
26. A. Aiello, M. Azzati, G. Benamati, A. Gessi, B. Long, G. Scaddozzo, J. Nucl. Mater. 335, 169–73 (2004)10.1016/j.jnucmat.2004.07.011 ↗
27. O. Taguchi, Y. Iijima, Philos. Mag. A 72, 1649–55 (1995)10.1080/01418619508243935 ↗
28. G.P. Tiwari, O. Taguchi, Y. Iijima, G.B. Kale, Defect Diffus. Data Pt. A 279, 117–24 (2008)10.4028/www.scientific.net/DDF.279.117 ↗
29. A. Laik, K. Bhanumurthy, G.B. Kale, B.P. Kashyap, Intl. J. Mater. Res. 103, 661–72 (2012)10.3139/146.110685 ↗
30. F.C. Holden, A.A. Watts, H.R. Ogden, R.I. Jaffee, Trans. AIME 203, 117–25 (1955)
31. T.A. Bhaskaran, R.V. Krishnan, S. Ranganathan, Metall. Mater. Trans. A 26A, 1367–77 (1995)10.1007/BF02647587 ↗
32. J.A. van Beek, A.A. Kodentsov, F.J.J. van Loo, J. Alloys Compds. 217, 97–103 (1995)10.1016/0925-8388(94)01302-X ↗
33. O. Kubaschewski, Landolt–Bornstein New Series, vol. IV/11C3 (Springer, Berlin, 2005), pp. 63–74
34. C.C. Liu, C.L. Ou, R.K. Shiue, J. Mater. Sci. 37, 2225–35 (2002)10.1023/A:1015356930476 ↗
35. J.G. Lee, S.J. Hong, M.K. Lee, C.K. Rhee, J. Nucl. Mater. 395, 145–49 (2009)10.1016/j.jnucmat.2009.10.045 ↗
36. J. Andrieux, O. Dezellus, F. Bosselet, J.C. Viala, J. Phase Equilib. Diff. 30, 40–45 (2009)10.1007/s11669-008-9424-7 ↗
37. R. Pretorious, MRS Proc. 25, 15 (1991)10.1557/PROC-25-15 ↗
38. R. Pretorious, R. de Reus, C.C. Theron, Mater. Sci. Eng. R 10, 1 (1991)10.1016/0921-5107(91)90087-C ↗
39. J.L. Liotard, D. Gupta, P.A. Psaras, P.S. Ho, J. Apppl. Phys. 57, 1895 (1985)10.1063/1.334422 ↗
40. J. Andrieux, O. Dezellus, F. Bosselet, M. Sacerdote-Peronnet, C. Sigala, R. Chiriac, J.C. Viala, J. Phase Equilib. Diffus. 29, 156–62 (2008)10.1007/s11669-008-9247-6 ↗
41. C.H. Hwang, S. Kang, K. Cho, Scripta Metall. 19, 1403–08 (1985)10.1016/0036-9748(85)90140-1 ↗
42. C.H. Hwang, Y.J. Ryeom, K. Cho, J. Less Common Metals 86, 187–94 (1982)10.1016/0022-5088(82)90204-1 ↗
43. C.G. Woychik, D.H. Lowndes, T.B. Massalski, Acta Metall. 33, 1861–71 (1985)10.1016/0001-6160(85)90008-2 ↗
44. K.H.J. Buschow, Scripta Metall. 17, 1135–39 (1983)10.1016/0036-9748(83)90469-6 ↗
45. K.H.J. Buschow, Acta Metall. 31, 155–60 (1983)10.1016/0001-6160(83)90075-5 ↗
46. A. Pratap, K.N. Lad, T.L. Shanker Rao, P. Majumdar, N.S. Saxena, J. Non-Cryst. Solids 345–346, 178–81 (2004)10.1016/j.jnoncrysol.2004.08.018 ↗
47. A. Pratap, T.L. Shanker Rao, K.N. Lad, H.D. Dhurandhar, J. Non-Cryst. Solids 353, 2346–49 (2007)10.1016/j.jnoncrysol.2007.04.011 ↗
48. F. Delogu, G. Cocco, J. Alloys Compd. 352, 92–98 (2003)10.1016/S0925-8388(02)01109-X ↗
49. C. Colinet, A. Pasturel, K.H.J. Buschow, J. Alloys Compd. 247, 15–19 (1997)10.1016/S0925-8388(96)02590-X ↗
50. Z. Hen, Z. Bangwei, T. Zhaosheng, W. Lijun, Metall. Trans. A 23A, 1627–30 (1992)10.1007/BF02804358 ↗
51. P. Villars, A. Prince, H. Okamoto, Handbook of Ternary Alloy Phase Diagrams (ASM International, Materials Park, OH, 1995)
52. H. Okamoto, J. Phase Equilib. 26, 549–50 (2002)10.1361/105497102770331307 ↗
53. R.K. Shiue, S.K. Wu, C.H. Chen, J. Alloys Compd. 372, 148–57 (2004)10.1016/j.jallcom.2003.09.155 ↗