journal article·2008-12

Grain Boundary Microstructural Control through Thermomechanical Processing in a Titanium-Modified Austenitic Stainless Steel

Sumantra Mandal, P.V. Sivaprasad, Baldev Raj, V. Subramanya Sarma

Publisher page

Abstract

The present study discusses the grain boundary microstructural control in a 15Cr-15Ni-2.2Mo-Ti modified austenitic stainless steel (commonly known as alloy D9) through a one-step thermomechanical treatment. The experimental methodology adopted in this investigation was based on the strain annealing approach in which a small amount of strain (5 to 15 pct) was imparted on the solution-annealed (SA) sample. The cold-deformed samples were subsequently annealed at various temperatures (1173 to 1273 K) for different time periods (0.5 to 2 hours). It was observed that annealing after 5 pct deformation induces anomalous grain growth with a moderate increase in number fraction of coincidence site lattice (CSL) boundaries. However, a prestrain of 10 to 15 pct followed by annealing at 1273 K for 0.5 to 2 hours was found to be a suitable thermomechanical processing schedule to increase the number fraction of CSL boundaries (particularly Σ3 and its variants) significantly. Further, the well-connected network of random grain boundaries present in the SA specimen was substantially disrupted in these processing conditions due to the incorporation of Σ3 and its variants. The preceding results were discussed with reference to strain-induced grain growth vis-a-vis strain-induced boundary migration (SIBM) following deformation and annealing.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. T. Watanabe: Res. Mech., 1984, vol. 11, pp. 47–84
2. G. Palumbo, P.J. King, K.T. Aust, U. Erb, and P.C. Lichtenberger: Scripta Metall. Mater., 1991, vol. 25, pp. 1775–8010.1016/0956-716X(91)90303-I ↗
3. T. Watanabe: Mater. Sci. Eng. A, 1993, vol. 166, pp. 11–2810.1016/0921-5093(93)90306-Y ↗
4. U. Krupp, P.E.-G. Wagenhuber, W.M. Kane, and C.J. McMahon Jr.: Mater. Sci. Technol., 2005, vol. 21, pp. 1247–5410.1179/174328405X63935 ↗
5. T. Watanabe, S. Tsurekawa, S. Kobayashi, and S. Yamaura: Mater. Sci. Eng. A, 2005, vols. 410–411, pp. 140–4710.1016/j.msea.2005.08.083 ↗
6. P. Lin, G. Palumbo, U. Erb, and K.T. Aust: Scripta Metall. Mater., 1995, vol. 33, pp. 1387–9210.1016/0956-716X(95)00420-Z ↗
7. E.M. Lehockey, G. Palumbo, and P. Lin: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 3069–7910.1007/s11661-998-0214-y ↗
8. D.H. Warrington, and M. Boon: Acta Metall. Mater., 1975, vol. 23, pp. 599–60710.1016/0001-6160(75)90100-5 ↗
9. G. Owen, and V. Randle: Scripta Mater., 2006, vol. 55, pp. 959–6210.1016/j.scriptamat.2006.04.049 ↗
10. A.J. Schwartz, M. Kumar, and W.E. King: MRS Symposium Proceedings, Materials Research Society, Pittsburgh, PA, 2000, vol. 586, pp. 3–1410.1557/PROC-586-3 ↗
11. V. Randle: Acta Mater., 2004, vol. 52, pp. 4067–8110.1016/j.actamat.2004.05.031 ↗
12. M. Michiuchi, H. Kokawa, Z.J. Wang, Y.S. Sato, and K. Sakai: Acta Mater., 2006, vol. 54, pp. 5179–8410.1016/j.actamat.2006.06.030 ↗
13. M. Shimada, H. Kokawa, Z.J. Wang, Y.S. Sato, and I. Karibe: Acta Mater., 2002, vol. 50, pp. 2331–4110.1016/S1359-6454(02)00064-2 ↗
14. M. Kronberg, and F.H. Wilson: Trans. AIME, 1949, vol. 185, pp. 501–17
15. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479–8410.1016/0001-6160(66)90168-4 ↗
16. V. Randle, and G. Owen: Acta Mater., 2006, vol. 54, pp. 1777–8310.1016/j.actamat.2005.11.046 ↗
17. V. Randle: Phil. Mag. A, 1993, vol. 67, pp. 1301–1310.1080/01418619308225356 ↗
18. V. Randle: Metall. Trans. A, 1990, vol. 21A, pp. 2215–2110.1007/BF02647883 ↗
19. D.J. Srolovitz, G.S. Grest, and M.P. Anderson: Acta Metall., 1985, vol. 33, pp. 2233–4710.1016/0001-6160(85)90185-3 ↗
20. P. Pumphrey, and H. Gleiter: Phil. Mag., 1971, vol. 35, pp. 365–70
21. C.S. Pande, M.A. Imam, and B.B. Rath: Metall. Trans. A, 1990, vol. 21A, pp. 2891–9610.1007/BF02647209 ↗
22. B.M. Guyot, and N.L. Richards: Mater. Sci. Eng. A, 2005, vol. 395, pp. 87–9710.1016/j.msea.2004.12.021 ↗
23. M. Kumar, A.J. Schwartz, and W.E. King: Acta Mater., 2002, vol. 50, pp. 2599–61210.1016/S1359-6454(02)00090-3 ↗
24. L.C. Lim, and R. Raj: Acta Metall. 1984, vol. 32, 1177–8110.1016/0001-6160(84)90124-X ↗
25. V. Randle: Acta Mater., 1999, vol. 47, pp. 4187–9610.1016/S1359-6454(99)00277-3 ↗
26. V. Randle: Scripta Mater., 2001, vol. 44, pp. 2789–9410.1016/S1359-6462(01)00975-7 ↗
27. D.M. Saylor, B.S. El-Dasher, and B.L. Adams: Metall. Mater. Trans., 2004, vol. 35A, pp. 1981–8910.1007/s11661-004-0147-z ↗
28. T. Watanabe: Text. Microstr., 1993, vol. 20, pp. 195–21610.1155/TSM.20.195 ↗
29. S. Tsurekawa, S. Nakamichi, and T. Watanabe: Acta Mater., 2006, vol. 54, pp. 3617–2610.1016/j.actamat.2006.03.048 ↗
30. V. Randle: The Role of the Coincidence Site Lattice in Grain Boundary Engineering, The Institute of Materials, London, 1996, p. 46
31. S.L. Lee, and N.L. Richards: Mater. Sci. Eng. A, 2005, vol. 405, pp. 74–8510.1016/j.msea.2005.05.103 ↗
32. Q. Li, B.M. Guyot, and N.L. Richards: Mater. Sci. Eng. A, 2007, vol. 458, pp. 58–6610.1016/j.msea.2006.12.129 ↗
33. L. Tan, and T.R. Allen: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1921–2510.1007/s11661-005-0055-x ↗
34. P. Davies, and V. Randle: Mater. Sci. Technol., 2001, vol. 17, pp. 615–2610.1179/026708301101510384 ↗