journal article·2014-02

Friction Stir Welding of Stainless Steel to Al Alloy: Effect of Thermal Condition on Weld Nugget Microstructure

M. Ghosh, R. K. Gupta, M. M. Husain

Publisher page

Abstract

Joining of dissimilar materials is always a global challenge. Sometimes it is unavoidable to execute multifarious activities by a single component. In the present investigation, 6061 aluminum alloy and 304 stainless steel were joined by friction stir welding (FSW) at different tool rotational rates. Welded joints were characterized in optical and scanning electron microscopes. Reaction products in the stirring zone (SZ) were confirmed through X-ray diffraction. Joint strength was evaluated by tensile testing. It was found that the increment in average heat input and temperature at the weld nugget (WN) facilitated iron enrichment near the interface. Enhancement in the concentration of iron shifted the nature of intermetallics from the Fe2Al5 to Fe-rich end of the Fe-Al binary phase diagram. The peak microhardness and ultimate tensile strength were found to be maxima at the intermediate tool rotational rate, where Fe3Al and FeAl2 appeared along with Fe2Al5.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. J. Tsujino, K. Hidai, A. Hasegawa, R. Kanai, H. Matsuura, K. Matsushima, and T. Ueoka: Ultrasonics, 2002, vol. 40, pp. 371–74.10.1016/S0041-624X(02)00124-5 ↗
2. M.U. Kamachi, B.M. Ananda Rao, K. Shanmugam, R. Natarajan, and B. Raj: J. Nucl. Mater., 2003, vol. 321, pp. 40–48.10.1016/S0022-3115(03)00194-6 ↗
3. K. Matsugi, Y. Wang, T. Hatayama, O. Yanagisawa, and K. Syakagohri: J. Mater. Process. Technol., 2003, vol. 135, pp. 75–82.10.1016/S0924-0136(02)01040-3 ↗
4. W.B. Lee, Y.M. Yeon, D.U. Kim, and S.B. Jung: Mater. Sci. Technol., 2003, vol. 19, pp. 773–78.10.1179/026708303225001876 ↗
5. M. Sahin: Int. J. Adv. Manuf. Technol., 2009, vol. 41, pp. 487–97.10.1007/s00170-008-1492-7 ↗
6. M. Yilmaz, M. Col, and M. Acet: Mater. Charact., 2003, vol. 49, pp. 421–29.10.1016/S1044-5803(03)00051-2 ↗
7. S. Fukumoto, H. Tsubakino, K. Okita, M. Aritoshi, and T. Tomita: Mater. Sci. Technol., 1998, vol. 14, pp. 333–38.10.1179/026708398790301421 ↗
8. M. Kikuchi, H. Takeda, and S. Morozumi: J. Jpn. Inst. Light Met., 1984, vol. 34, pp. 165–73.10.2464/jilm.34.165 ↗
9. S. Fukumoto, H. Tsubakino, K. Okita, M. Aritoshi, and T. Tomita: Scripta Mater., 2000, vol. 42, pp. 807–12.10.1016/S1359-6462(00)00299-2 ↗
10. H. Uzun, C.D. Donne, A. Argagnotto, T. Ghidini, and C. Gambaro: Mater. Des., 2005, vol. 26, pp. 41–46.10.1016/j.matdes.2004.04.002 ↗
11. W.B. Lee, M. Schmuecker, U.A. Mercardo, G. Biallas, and S.B. Jung: Scripta Mater., 2006, vol. 55, pp. 355–58.10.1016/j.scriptamat.2006.04.028 ↗
12. T. Ogura, Y. Saito, T. Nishida, H. Nishida, T. Yoshida, N. Omichi, M. Fujimoto, and A. Hirose: Scripta Metall., 2012, vol. 66, pp. 531–34.10.1016/j.scriptamat.2011.12.035 ↗
13. ASTM E384-11e1: Standard Test Methods for Knoop and Vickers Hardness of Materials. http://enterprise1.astm.org/DOWNLOAD/E384.1203260-1.pdf.
14. ASTM E8/E8M-11: Standard Test Methods for Tension Testing of Metallic Materials. http://enterprise2.astm.org/DOWNLOAD/E8.1203260-1.pdf.
15. A. Elrefaey, M. Gouda, M. Takahashi, and K. Ikeuchi: J. Mater. Eng. Perform., 2005, vol. 4, pp. 10–17.10.1361/10599490522310 ↗
16. S. Bozzi, A.L. Helbert-Etter, T. Baudin, B. Criqui, and J.G. Kerbiguet: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4505–09.10.1016/j.msea.2010.03.097 ↗
17. E. Ahmed, T. Makoto, and I. Kenji: J. Jpn. Soc. Weld., 2005, vol. 23, pp. 186–93.10.2207/qjjws.23.186 ↗
18. R.S. Coelho, A. Kostka, J.F. D Santos, and A.R. Pyzalla: Adv. Eng. Mater., 2008, vol. 10, pp. 1127–33.10.1002/adem.200800227 ↗
19. M. Watanabe, T. Ookawa, and S. Kumai: J. Jpn. Inst. Light Met., 2007, vol. 57, pp. 536–41.10.2464/jilm.57.536 ↗
20. K. Tanaka, M. Kumagai, and H. Yoshida: J. Jpn. Inst. Light Met., 2006, vol. 56, pp. 317–22.10.2464/jilm.56.317 ↗
21. B.S. Yilbas, A.Z. Sahin, N. Kahraman, and A.Z. Al-Garni. J. Mater. Process. Technol., 1995, vol. 49, pp. 431–43.10.1016/0924-0136(94)01349-6 ↗
22. Y.C. Chen and K. Nakata: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1985–92.10.1007/s11661-008-9523-4 ↗
23. T. Watanabe, H. Takayama, and A. Yanagisawa: J. Mater. Process. Technol., 2006, vol. 178, pp. 342–49.10.1016/j.jmatprotec.2006.04.117 ↗
24. M. Ghosh, A. Kar, K. Kumar, and S.V. Kailas: Mater. Technol., 2012, vol. 27, pp. 169–72.10.1179/175355509X12608916825994 ↗
25. W.H. Jiang and R. Kovacevic: Proc. Inst. Mech. Eng., 2004, vol. 218, Part B: J. Eng. Manufact., pp. 1323–31.
26. Y. Wei, J. Li, J. Xiong, and F. Zhang: J. Mater. Eng. Performance, 2013, May, http://link.springer.com/article/10.1007%2Fs11665-013-0595-y.
27. Y. Uematsu, T. Kakiuchi, and E. Kondoh: Fatigue Behavior of Dissimilar A6061/Rolled Steel (SS400) Friction Stir Welds, www.isem2012.tw/full-paper.D.102.pdf.10.2207/qjjws.31.112 ↗
28. T. Chen and W.B. Lin: Proc. Int. Conf. on Smart Manufacturing Application, KINTEX, Gyeonggi-do, Korea, Apr. 9–11, IEEE, 2008, pp. 9–14.
29. T. Chen and W.B. Lin: Proc. XIth Int. Congr. Expos., Orlando, FL, June 2–5, 2008, http://sem-proceedings.com/08s/sem.org-SEM-XI-Int-Cong-s020p02-A-Prime-Study-FSW-Joint-Dissimilar-Metals.pdf.
30. T. Tanaka, T. Morishige, and T. Hirata: Scripta Mater., 2009, vol. 61, pp. 756–59.10.1016/j.scriptamat.2009.06.022 ↗
31. Y.C. Chen, T. Komazaki, T. Tsumura, and K. Nakata: Mater. Sci. Technol., 2008, vol. 24, pp. 33–39.10.1179/174328407X248505 ↗
32. C.M. Chen and R. Kovacevic: Int. J. Mach. Tools Manufact., 2004, vol. 44, pp. 1205–14.10.1016/j.ijmachtools.2004.03.011 ↗
33. M. Ghosh, S. Das, P.S. Banarjee, and S. Chatterjee: Mater. Sci. Eng. A, 2005, vol. 390, pp. 217–26.10.1016/j.msea.2004.08.039 ↗
34. Z.O. Frigaard, O. Grong, and O.T. Midling: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1189–1200.10.1007/s11661-001-0128-4 ↗
35. R. Nandan, G.G. Roy, and T. DebRoy: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1247–59.10.1007/s11661-006-1076-9 ↗
36. R. Nandan, G.G. Roy, T.J. Lienert, and T. DebRoy: Acta Mater., 2007, vol. 55, pp. 883–95.10.1016/j.actamat.2006.09.009 ↗
37. W.J. Arbegast: Hot Deformation of Aluminum Alloys III, San Diego, CA, 2003, Z. Jin, A. Beaudoin, T.A. Bieler, and B. Radhakrishinan, eds., TMS, Warrendale, PA, pp. 313–27.
38. M. Ghosh, K. Bhanumurthy, G.B. Kale, and S. Chatterjee: Mater. Sci. Technol., 2004, vol. 20, pp. 131–36.10.1179/026708304225010479 ↗
39. L. Agudo, D. Eyidi, C.H. Schmaranzer, E. Arenholz, N. Jank, J. Bruckner, and A.R. Pyzalla: J. Mater. Sci., 2007, vol. 42, pp. 4205–14.10.1007/s10853-006-0644-0 ↗
40. H.W. Liu, C. Guo, Y. Cheng, X.F. Liu, and G.J. Shao: Mater. Lett., 2006, vol. 60, pp. 180–84.10.1016/j.matlet.2005.08.015 ↗
41. S. Kobayashi and T. Yakou: Mater. Sci. Eng. A, 2002, vol. 338, pp. 44–53.10.1016/S0921-5093(02)00053-9 ↗
42. H.T. Zhang, J.C. Feng, P. He, and H. Hackl: Mater. Characterization, 2007, vol. 58, pp. 588–92.10.1016/j.matchar.2006.07.008 ↗
43. U.R. Kattner and B.P. Burton: ASM Handbook on Alloy Phase Diagram, H. Baker, ed., ASM INTERNATIONAL, Materials Park, OH, 1992, vol. 3, pp. 2.44–2.45.
44. T. Chen: J. Mater. Sci., 2009, vol. 44, pp. 2573–80.10.1007/s10853-009-3336-8 ↗
45. L. Peng, L. Yajiang, W. Juan, and G. Jishi: Mater. Res. Bull., 2003, vol. 38, pp. 1493–99.10.1016/S0025-5408(03)00176-4 ↗
46. M. Potesser, T. Schoeberl, H. Antrekowitsch, and J. Bruckner: EPD Congr. 2006, San Antonio, TX, 2006, S.M. Howard, R.L. Stephens, C.J. Newman, J.Y.J Hwang, A.M. Gokhale, T.T. Chen, T.P. Battle, M.L. Free, B.R. Davis, C.L. Harris, H. Henein, P.N. Anyalebechi, A.C. Powell, G.K. Krumdick, and C.K. Belt, eds., TMS, Warrendale, PA, 2006, pp. 167–76.