Selective Oxidation and Reactive Wetting During Hot-Dip Galvanizing of a 1.0 pct Al-0.5 pct Si TRIP-Assisted Steel
Source abstract
Abstract
Selective oxidation and reactive wetting during continuous galvanizing were studied for a low-alloy transformation induced plasticity (TRIP)-assisted steel with 0.2 pct C, 1.5 pct Mn, 1.0 pct Al and 0.5 pct Si. Three process atmospheres were tested during annealing prior to galvanizing: 220 K (–53 °C) dew point (dp) N2-20 pct H2, 243 K (–30 °C) dp N2-5 pct H2 and 278 K (+5 °C) dp N2-5 pct H2. The process atmosphere oxygen partial pressure affected the oxide chemistry, morphology and thickness. For the 220 K (–53 °C) dp and 243 K (–30 °C) dp process atmospheres, film and nodule-type manganese, silicon and aluminum containing oxides were observed at the surface. For the 278 K (+5 °C) dp atmosphere, MnO was observed at the grain boundaries and as thicker localized surface films. Oxide morphology, thickness and chemistry affected reactive wetting, with complete wetting being observed for the 220 K (–53 °C) dp and 243 K (–30 °C) dp process atmospheres and incomplete reactive wetting being observed for the 278 K (+5 °C) dp atmosphere. Complete reactive wetting for the 220 K (–53 °C) dp and 243 K (–30 °C) dp process atmospheres was attributed to a combination of zinc bridging of oxides, aluminothermic reduction of surface oxides and wetting of the oxides. Incomplete wetting for the 278 K (+5 °C) dp atmosphere was attributed to localized thick MnO films.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Corrosion Behavior and Inhibition · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. M. Takahashi, H. Yoshida, and S. Hiwatashi: Int. Conf. on TRIP-Aided High Strength Ferrous Alloys, Ghent, Belgium, June 19–21, 2002, pp. 103–11.
2. J. Van Slycken, P. Verleysen, J. Degrieckm, J. Bouquerel, and B.C. De Cooman: Mater. Sci. Eng. A, 2007, vols. 460–461, pp. 516–24.10.1016/j.msea.2007.01.075 ↗
3. B.C. De Cooman: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 285–303.10.1016/j.cossms.2004.10.002 ↗
4. P. Jacques, X. Cornet, P. Harlet, J. Ladrière, and F. Delannay: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2383–93.10.1007/s11661-998-0114-1 ↗
5. O. Matsumura, Y. Sakuma, and H. Takechi: Trans. ISIJ, 1987, vol. 27, pp. 570–79.10.2355/isijinternational1966.27.570 ↗
6. Y. Tomota, H. Tokuda, Y. Adachi, M. Wakita, A. Moriai, and Y. Morii: Acta Mater., 2004, vol. 52, pp. 5737–45.10.1016/j.actamat.2004.08.016 ↗
7. P. Jacques, Q. Furnémont, A. Mertens, and F. Delannay: Phil. Mag. A, 2001, vol. 81, pp. 1789–1812.10.1080/01418610108216637 ↗
8. P.J. Jacques, E. Girault, A. Mertens, B. Verlinden, J. Van Humbeeck, and F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1068–74.10.2355/isijinternational.41.1068 ↗
9. E. Girault, A. Mertens, P. Jacques, Y. Houbaert, B. Verlinden, and J. Van Humbeeck: Scripta Mater., 2001, vol. 44, pp. 885–92.10.1016/S1359-6462(00)00697-7 ↗
10. A.K. Srivastava, D. Battacharjee, G. Jha, N. Gope, and S.B. Singh: Mater. Sci. Eng. A, 2007, vols. 445–446, pp. 549–57.10.1016/j.msea.2006.09.101 ↗
11. A.N. Vasilakos, J. Ohlert, K. Giasla, G.N. Haidemenopoulos, and W. Bleck: Steel Res., 2002, vol. 73, pp. 249–52.10.1002/srin.200200204 ↗
12. M. De Meyer, D. Vanderschueren, and B.C. De Cooman: ISIJ Int., 1999, vol. 39, pp. 813–22.10.2355/isijinternational.39.813 ↗
13. J. Mahieu, J. Maki, B.C. De Cooman, and S. Claessens: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2573–80.10.1007/s11661-002-0378-9 ↗
14. H.C. Chen, H. Era, and M. Shimizu: Metall. Trans. A, 1989, vol. 20A, pp. 437–45.10.1007/BF02653923 ↗
15. A. Pichler, S. Traint, G. Arnolder, P. Stiaszny, M. Blaimschein, and E.A. Werner: Iron Steelmaker, 2003, vol. 30, pp. 21–31.
16. J. McDermid, S. Dionne, O. Dremailova, B. Voyzelle, E. Essadiqi, E. Baril, and F. Goodwin: 2005 SAE World Congress, Society for Automotive Engineers, Detroit, MI, 2005, paper no. 2005-01-0495.
17. S.C. Baik, S. Kim, Y.S. Jin, and O. Kwon: ISIJ Int., 2001, vol. 41, pp. 290–97.10.2355/isijinternational.41.290 ↗
18. H. Matsuda, F. Kitano, K. Hasegawa, T. Urabe, and Y. Hosoya: Steel Res., 2002, vol. 73, pp. 211–17.10.1002/srin.200200199 ↗
19. D. Krizan, B.C. De Cooman, and J. Antonissen: Int. Conf. Adv. High Strength Sheet Steels Autom. Appl. Proc., AIST, Warrendale, PA, 2004, pp. 205–16.
20. A. Mertens and J. McDermid: Mater. Sci. Technol. 2005, Pittsburgh, PA, Sept. 25–28, 2005, pp. 199–210.
21. A. Mertens and J.R. McDermid: Materials Science and Technology (MS&T) 2006: Materials and Systems–Volume 2, Cincinnati, OH, Oct. 15–19, 2006, pp. 131–42.
22. E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1460–73.10.1007/s11661-010-0185-7 ↗
23. P. Drillet, Z. Zermout, D. Bouleau, J. Mataigne, and S. Claessens: Proc. 6th Int. Conf. on Zinc Alloy Coated Steel Sheet–Galvatech 2004, Chicago, IL, Apr. 4–7, 2004, Association for Iron and Steel Technology, Warrendale, PA, 2004, pp. 1123–34.
24. J. Mahieu, B.C. De Cooman, J. Maki, and S. Claessens: Iron Steelmaker, 2002, vol. 29, pp. 29–34.10.1179/030192302225005556 ↗
25. M.S. Kim, J.H. Kwak, J.S. Kim, Y.H. Liu, N. Gao, and N.-Y. Tang: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1903–10.10.1007/s11661-009-9880-7 ↗
26. J. Mahieu, S. Claessens, and B.C. De Cooman: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2905–08.10.1007/s11661-001-1042-5 ↗
27. J. Maki, J. Mahieu, B.C. De Cooman, and S. Claessens: Mater. Sci. Technol., 2003, vol. 19, pp. 125–31.10.1179/026708303225009300 ↗
28. J. Mahieu, S. Classens, B.C. De Cooman, and F. Goodwin: Proc. 6th Int. Conf. on Zinc Alloy Coated Steel Sheet–Galvatech 2004, Chicago, IL, Apr. 4–7, 2004, Association for Iron and Steel Technology, Galvatech, pp. 529–38.
29. F.B. Pickering: Physical Metallurgy and the Design of Steels, Applied Science Publishers Ltd., London, 1978, p. 11.
30. I.-H. Jung, Y.-B. Kang, S.A. Decterov, and A.D. Pelton: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 259–68.10.1007/s11663-004-0027-3 ↗
31. I.-H. Jung, M. Paliwal, Y.-M. Kim, S.-K. Lee, and J.-S. Kim: Proc. Asia-Pacific Galvanizing Conf., Jeju, Korea, Nov. 8–12, 2009, The Corrosion Science Society of Korea, Seoul, paper no. A-34.
32. Y.F. Gong, Y.R. Lee, H.S. Kim, and B.C. De Cooman: Proc. Asia-Pacific Galvanizing Conf., Nov. 8–12, 2009, Jeju, Korea, The Corrosion Science Society of Korea, Seoul, Korea, paper no. A-41.
33. X.S. Li, S.-I. Baek, C.-S. Oh, S.-J. Kim, and Y.-W. Kim: Scripta Mater., 2008, vol. 59, pp. 290–93.10.1016/j.scriptamat.2008.03.025 ↗
34. E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1539–53.10.1007/s11661-010-0192-8 ↗
35. E.M. Bellhouse and J.R. McDermid: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2753–68.10.1007/s11661-011-0685-0 ↗
36. J.R. McDermid, M.H. Kaye, and W.T. Thompson: Metall. Mater. Trans. B, 2007, vol. 38B, pp. 215–30.10.1007/s11663-007-9028-3 ↗
37. H.A. Fine and G.H. Geiger: Handbook on Material and Energy Balance Calculations in Metallurgical Processes, TMS-AIME, Warrendale, PA, 1979, pp. 385 and 428.
38. B.R. Strohmeier and D.M. Hercules: J. Phys. Chem., 1984, vol. 88, pp. 4922–29.10.1021/j150665a026 ↗
39. M.C. Biesinger, B.P. Payne, A.P. Grosvenor, L.W.M. Lau, A.R. Gerson, and R.St.C. Smart: Appl. Surf. Sci., 2011, vol. 257, pp. 2717–30.10.1016/j.apsusc.2010.10.051 ↗
40. E. Baril and G. L’Esperance: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 681–95.10.1007/s11661-999-1000-1 ↗
41. L. Chen, R. Fourmentin, and J.R. McDermid: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2128–42.10.1007/s11661-008-9552-z ↗
42. T. Nakamori, Y. Adachi, T. Toki, and A. Shibuya: ISIJ Int., 1996, vol. 36, pp. 179–86.10.2355/isijinternational.36.179 ↗
43. H.J. Grabke, V. Leroy, and H. Viefhaus: ISIJ Int., 1995, vol. 35, pp. 95–113.10.2355/isijinternational.35.95 ↗
44. T. Van De Putte, D. Loison, J. Penning, and S. Claessens: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2875–84.10.1007/s11661-008-9636-9 ↗
45. R. Khondker, A. Mertens, and J.R. McDermid: Mater. Sci. Eng. A, 2007, vol. 463, pp. 157–65.10.1016/j.msea.2006.09.116 ↗
46. O. Kubaschewski and C.B. Alcock: Metallurgical Thermochemistry, 5th ed., Pergamon Press, Oxford, United Kingdom, 1979, p. 382.
47. Y.F. Gong, T.J. Song, H.S. Kim, J.H. Kwak, and B.C. DeCooman: Proc. Asia-Pacific Galvanizing Conf. 2009, Jeju, Korea, Nov. 8–12, 2009, The Corrosion Science Society of Korea, Seoul, Korea, paper no. B-15.
48. R. Kavitha and J.R. McDermid: Proc. 8th Int. Conf. on Zinc Alloy Coated Steel Sheet–Galvatech 2011: Steel Surface Characterization, Genova, Italy, June 21–24, 2011, Associazione Italiana di Metallurgia, Milan, Italy, 2011.
49. S. Alibeigi, R. Kavitha, R.J. Meguerian, and J.R. McDermid: Acta Mater., 2011, vol. 59, pp. 3537–49.10.1016/j.actamat.2011.02.027 ↗
50. P. Toussaint, L. Segers, R. Winand, and M. Dubois: ISIJ Int., 1998, vol. 38 pp. 985–90.10.2355/isijinternational.38.985 ↗
51. N.-Y. Tang: Zinc-Based Steel Coating Systems: Production and Performance, TMS, Warrendale, PA, 1998, pp. 3–12.