Kinking Nonlinear Elasticity and the Deformation of Magnesium
Source abstract
Abstract
Despite a large body of work devoted to understanding the deformation of polycrystalline magnesium, there are still some outstanding questions, not the least of which are the nature of its microyielding and the nature of its fully reversible, hysteretic, stress-strain curves. In this article, we provide further evidence that Mg is a kinking nonlinear solid by showing excellent agreement between the predictions of our microscale model, in which fully reversible, dislocation-based incipient kink bands (IKBs) are the key microscale element, the experimental results obtained in our study, and, just as important, the results obtained by others. It follows that microyielding and the fully reversible hysteresis loops are most likely to be due to IKB formation, with the propensity for kinking being enhanced for coarse-grained samples up to a grain size of ≈50 μm, after which further increases in grain size have little effect. From the areas of the reversible loops, the critical resolved shear stresses (CRSSs) associated with the movement of basal plane dislocations are obtained and are shown to scale with the maximum flow stresses at which the loops are obtained. We also make the case that, at least for low strains, strains along the c-axis can be accommodated by invoking the formation of IKBs, mobile dislocation walls, and kink boundaries and should be included in future modeling of the deformation of polycrystalline Mg.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (74)
Show source-provided references
1. P.W. Bakarian and C.H. Mathewson: Slip and Twinning in Magnesium Single Crystals at Elevated Temperatures, American Institute of Mining and Metallurgical Engineers, New York, NY, 1943.
2. E.C. Burke and W.R. Hibbard: Trans. AIME, 1952, vol. 194, pp. 295–303.
3. H. Conrad and W.D. Robertson: J. Met., 1957, vol. 9, pp. 503–12.
4. J.M. Roberts and D.E. Hartman: Trans. AIME, 1964, vol. 230, pp. 1125–33.
5. A. Akhtar and E. Teghtsoonian: Acta Metall., 1969, vol. 17, pp. 1339–49.10.1016/0001-6160(69)90151-5 ↗
6. A. Akhtar and E. Teghtsoonian: Acta Metall., 1969, vol. 17, pp. 1351–56.10.1016/0001-6160(69)90152-7 ↗
7. W.F. Sheely and R.R. Nash: Trans. Met. Soc. Am. Inst. Min., Met. Pet. Eng., 1960, vol. 218, pp. 416–23.
8. P.G. Partridge and E. Roberts: J. Inst. Met., 1963, vol. 92, pp. 50–54.
9. F.E. Hauser, P.R. Landon, and J.E. Dorn: Trans. AIME, 1956, vol. 206, pp. 589–93.
10. F.E. Hauser, P.R. Landon, and J.E. Dorn: Trans. AIME, 1956, vol. 48, pp. 986–1002.
11. F.E. Hauser, C.D. Starr, L. Tietz, and J. E. Dorn: Trans. Am. Soc. Met., 1955, vol. 47, pp. 102–34.
12. M.A. Gharghouri, G.C. Weatherly, J.D. Embury, and J. Root: Philos. Mag. A, 1999, pp. 1671–95.10.1080/01418619908210386 ↗
13. C.H. Caceres, T. Sumitomo, and M. Veidt: Acta Mater., 2003, vol. 51, pp. 6211–18.10.1016/S1359-6454(03)00444-0 ↗
14. G. Mann, J.R. Griffiths, and C.H. Caceres: J. Alloys Compd., 2004, vol. 378, pp. 188–91.10.1016/j.jallcom.2003.12.052 ↗
15. G.E. Mann, T. Sumitomo, C.H. Caceres, and J.R. Griffiths: Mater. Sci. Eng., A, 2007, vol. 456, pp. 138–46.10.1016/j.msea.2006.11.160 ↗
16. M.R. Barnett, Z. Keshavarz, A.G. Beer, and D. Atwell: Acta Mater., 2004, vol. 52, pp. 5093–5103.10.1016/j.actamat.2004.07.015 ↗
17. S.W. Chung, H. Watanabe, W.-J. Kim, and K. Higashi: Mater. Trans., 2004, vol. 45, 1266–71.10.2320/matertrans.45.1266 ↗
18. N. Ono, R. Nowak, and S. Miura: Mater. Lett., 2004, vol. 58, pp. 39–43.10.1016/S0167-577X(03)00410-5 ↗
19. S.R. Agnew, D.W. Brown and C.N. Tome: Acta Mater., 2006, vol. 54, pp. 4841–52.10.1016/j.actamat.2006.06.020 ↗
20. S.R. Agnew, D.W. Brown, S.C. Vogel, and T.M. Holden: In-Situ Measurement of Internal Strain Evolution during Deformation Dominated by Mechanical Twinning, Trans Tech Publications, Ltd., Zurich-Uetikon, Switzerland, 2002.
21. S.R. Agnew, J.A. Horton, T.M. Lillo, and D.W. Brown: Scripta Mater., 2004, vol. 50, pp. 377–81.10.1016/j.scriptamat.2003.10.006 ↗
22. S.R. Agnew, J.A. Horton, and M.H. Yoo: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 851–58.10.1007/s11661-002-0154-x ↗
23. S.R. Agnew, P. Mehrotra, T.M. Lillo, G.M. Stoica, and P.K. Liaw: Acta Mater., 2005, vol. 53, pp. 3135–46.10.1016/j.actamat.2005.02.019 ↗
24. S.R. Agnew, C.N. Tome, D.W. Brown, T.M. Holden, and S.C. Vogel: Scripta Mater., 2003, vol. 48, pp. 1003–08.10.1016/S1359-6462(02)00591-2 ↗
25. S.R. Agnew, M.H. Yoo, and C.N. Tome: Acta Mater., 2001, vol. 49, pp. 4277–89.10.1016/S1359-6454(01)00297-X ↗
26. H. Yoshinaga, T. Obara, and S. Morozumi: Mater. Sci. Eng., 1973, vol. 12, pp. 255–64.10.1016/0025-5416(73)90036-0 ↗
27. D.W. Brown, S.R. Agnew, S.P. Abeln, W.R. Blumenthal, M.A.M. Bourke, M.C. Mataya, C.N. Tome, and S.C. Vogel: The Role of Texture, Temperature, and Strain Rate in the Activity of Deformation Twinning, 2005.10.4028/0-87849-975-x.1037 ↗
28. D.W. Brown, S.R. Agnew, M.A.M. Bourke, T.M. Holden, S.C. Vogel, and C.N. Tome: Mater. Sci. Eng., A, 2005, vol. 399, pp. 1–12.10.1016/j.msea.2005.02.016 ↗
29. J. Koike, T. Kobayashi, T. Mukai, H. Watanabe, M. Suzuki, K. Maruyama, and K. Higashi: Acta Mater., 2003, vol. 51, pp. 2055–65.10.1016/S1359-6454(03)00005-3 ↗
30. R.E. Reed-Hill and W.D. Robertson: Acta Mater., 1957, vol. 5, p. 717.10.1016/0001-6160(57)90074-3 ↗
31. E. Roberts and P.G. Partridge: Acta Metall., 1966, vol. 14, pp. 513–27.10.1016/0001-6160(66)90319-1 ↗
32. J. Koike and R. Ohyama: Acta Mater., 2005, vol. 53, pp. 1963–72.10.1016/j.actamat.2005.01.008 ↗
33. B. Clausen, C.N. Tome, D.W. Brown, and S.R. Agnew: Acta Mater., 2008, vol. 56, pp. 2456–68.10.1016/j.actamat.2008.01.057 ↗
34. A.G. Zhou, S. Basu, and M.W. Barsoum: Acta Mater., 2008, vol. 56, pp. 60–67.10.1016/j.actamat.2007.08.050 ↗
35. S. Basu, M.W. Barsoum, and S.R. Kalidindi: J. Appl. Phys., 2006, vol. 99, p. 063501.10.1063/1.2179974 ↗
36. M.W. Barsoum, A. Murugaiah, S.R. Kalidindi, and Y. Gogotsi: Carbon, 2004, vol. 42, pp. 1435–45.10.1016/j.carbon.2003.12.090 ↗
37. M.W. Barsoum, A. Murugaiah, S.R. Kalidindi, and T. Zhen: Phys. Rev. Lett., 2004, vol. 92, 255508 (4 pp.).10.1103/PhysRevLett.92.255508 ↗
38. M.W. Barsoum, T. Zhen, A. Zhou, S. Basu, and S.R. Kalidindi: Phys. Rev. B., 2005, vol. 71, p. 134101.10.1103/PhysRevB.71.134101 ↗
39. S. Basu, A.G. Zhou, and M.W. Barsoum: J. Mater. Res., 2008, vol. 23, pp. 1334–38.10.1557/jmr.2008.0150 ↗
40. M.W. Barsoum, T. Zhen, S.R. Kalidindi, M. Radovic, and A. Murugahiah: Nature Mater., 2003, vol. 2, pp. 107–11.10.1038/nmat814 ↗
41. A.G. Zhou, M.W. Barsoum, S. Basu, S.R. Kalidindi, and T. El-Raghy: Acta Mater., 2006, vol. 54, p. 1631.10.1016/j.actamat.2005.11.035 ↗
42. M.W. Barsoum: Prog. Solid State Chem., 2000, vol. 28, pp. 201–81.10.1016/S0079-6786(00)00006-6 ↗
43. M.W. Barsoum and T. El-Raghy: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 363–69.10.1007/s11661-999-0325-0 ↗
44. J.B. Hess and C.S. Barrett: Trans. AIME, 1949, vol. 185, pp. 599–606.
45. M.W. Barsoum, L. Farber, T. El-Raghy, and I. Levin: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1727–38.10.1007/s11661-999-0172-z ↗
46. T. Zhen, M.W. Barsoum, and S.R. Kalidindi: Acta Mater., 2005, vol. 53, pp. 4163–71.10.1016/j.actamat.2005.05.020 ↗
47. T. Zhen, M.W. Barsoum, S.R. Kalidindi, M. Radovic, Z.M. Sun, and T. El-Raghy: Acta Mater., 2005, vol. 53, pp. 4963–73.10.1016/j.actamat.2005.05.037 ↗
48. D. Chen, K. Shirato, M.W. Barsoum, T. El-Raghy, and R.O. Ritchie: J. Am. Ceram. Soc., 2001, vol. 84, p. 2914.10.1111/j.1151-2916.2001.tb00704.x ↗
49. C.J. Gilbert, D.R. Bloyer, M.W. Barsoum, T. El-Raghy, A.P. Tomasia, and R.O. Ritchie: Scripta Mater., 2000, vol. 238, pp. 761–67.10.1016/S1359-6462(99)00427-3 ↗
50. T. Zhen, M.W. Barsoum, S.R. Kalidindi, M. Radovic, Z.M. Sun, and T. El-Raghy: Acta Mater., 2005, vol. 53, pp. 4963–73.10.1016/j.actamat.2005.05.037 ↗
51. A.N. Stroh: Philos. Mag., 1958, vol. 3, p. 597.10.1080/14786435808565802 ↗
52. F.C. Frank and A.N. Stroh: Proc. Phys. Soc., 1952, vol. 65, pp. 811–21.10.1088/0370-1301/65/10/311 ↗
53. D. Hull: Introduction to Dislocation, Pergamon Press, Oxford, United Kingdom, 1965.
54. M. Fraczkiewicz, A.G. Zhou, and M.W. Barsoum: Acta Mater., 2006, vol. 54, pp. 5261–70.10.1016/j.actamat.2006.06.052 ↗
55. M.R. Barnett, Z. Keshavarz, and X. Ma: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2283–93.10.1007/BF02586147 ↗
56. E.J. Freise and A. Kelly: Proc. Phys. Soc. A, 1961, vol. 264, pp. 269–76.
57. G.F. Vander Voort: Metallography: Past, Present, and Future, 75th anniv. vol., G.F.V. Voort, F.J. Warmuth, S.M. Purdy, and A. Szirmae, eds., ASTM, West Conshohocken, PA, 1993.10.1520/STP1165-EB ↗
58. D.W. Brown, M.A.M. Bourke, P.S. Dunn, R.D. Field, M.G. Stout, and D.J. Thoma: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2219–28.10.1007/s11661-001-0197-4 ↗
59. A. Salem, S. Kalidindi, R. Doherty, and S. Semiatin: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 259–68.10.1007/s11661-006-0171-2 ↗
60. D.W. Brown, A. Jain, S.R. Agnew, and B. Clausen: Mater. Sci. Forum, 2007, vols. 539–543, pp. 3407–13.10.4028/www.scientific.net/MSF.539-543.3407 ↗
61. A.J.W. Moore: Proc. Phys. Soc. B, 1952, vol. 65, pp. 956–58.10.1088/0370-1301/65/12/306 ↗
62. D.C. Jillson: Trans., 1950, vol. 188, p. 1009.
63. X.Y. Lou, M. Li, R.K. Boger, S.R. Agnew, and R.H. Wagoner: Int. J. Plast., 2007, vol. 23, pp. 44–86.10.1016/j.ijplas.2006.03.005 ↗
64. M.W. Barsoum, A.G. Zhou, D.W. Brown, and S.C. Vogel: unpublished research.
65. X.Y. Yang, H.M. Miura, and T. Sakai: Mater. Trans., 2003, vol. 44, pp. 197–203.10.2320/matertrans.44.197 ↗
66. D.W. Brown, A. Jain, S.R. Agnew, and B. Clausen: Mater. Sci. Forum., 2007, vols. 539–543, p. 3407.10.4028/www.scientific.net/MSF.539-543.3407 ↗
67. S. Amini, A. Zhou, S. Gupta, A. DeVillier, P. Finkel, and M.W. Barsoum: J. Mater. Res., 2008, vol. 23, pp. 2157–65.10.1557/jmr.2008.0262 ↗
68. M.W. Barsoum, A.G. Zhou, D.W. Brown, and S.C. Vogelin: unpublished research.
69. D.W. Brown, S.P. Abeln, W.R. Blumenthal, M.A.M. Bourke, M.C. Mataya, and C.N. Tome: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 929–39.10.1007/s11661-005-0287-9 ↗
70. M. Radovic, M.W. Barsoum, T. El-Raghy, and S.M. Wiederhorn: J. Alloys Compd., 2003, vol. 361, pp. 299–312.10.1016/S0925-8388(03)00435-3 ↗
71. L. Farber, I. Levin, and M.W. Barsoum: Philos. Mag. Lett., 1999, vol. 79, pp. 163–70.10.1080/095008399177390 ↗
72. P. Duval, M.F. Ashby, and I. Anderman: J. Phys. Chem., 1983, vol. 87, pp. 4066–74.10.1021/j100244a014 ↗
73. M.W. Barsoum, M. Radovic, P. Finkel, and T. El-Raghy: Appl. Phys. Lett., 2001, vol. 79.10.1063/1.1384479 ↗
74. S. Basu and M.W. Barsoum: J. Mater. Res., 2007, vol. 22, pp. 2470–77.10.1557/jmr.2007.0305 ↗