journal article·2013-09

Relationship Between the 3D Porosity and β-Phase Distributions and the Mechanical Properties of a High Pressure Die Cast AZ91 Mg Alloy

Somjeet Biswas, Federico Sket, Michele Chiumenti, Iván Gutiérrez-Urrutia, Jon M. Molina-Aldareguía, Maria Teresa Pérez-Prado

Publisher page

Abstract

Currently, most magnesium lightweight components are fabricated by casting as this process is cost effective and allows forming parts with complex geometries and weak textures. However, cast microstructures are known to be heterogeneous and contain unpredictable porosity distributions, which give rise to a large variability in the mechanical properties. This work constitutes an attempt to correlate the microstructure and the mechanical behavior of a high pressure die cast (HPDC) Mg AZ91 alloy, aimed at facilitating process optimization. We have built a stairway-shaped die to fabricate alloy sections with different thicknesses and, thus, with a range of microstructures. The grain size distributions and the content of β-phase (Mg17Al12) were characterized by optical and electron microscopy techniques as well as by electron backscatter diffraction (EBSD). The bulk porosity distribution was measured by 3D computed X-ray microtomography. It was found that the through-thickness microhardness distribution is mostly related to the local area fraction of the β-phase and to the local area fraction of the pores. We correlate the tensile yield strength to the average pore size and the fracture strength and elongation to the bulk porosity volume fraction. We propose that this empirical approach might be extended to the estimation of mechanical properties in other HPDC Mg alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. K.U. Kainer and F.V Buch: in Magnesium Alloys and Technology, K.U. Kainer, ed., Wiley-VCH Pub. DGM, Weinheim, 2003, p. 9.10.1002/3527602046 ↗
2. B.L. Mordike and P. Lukác: in Magnesium Technology Metallurgy, Design Data, Applications, H.E. Friedrich and B.L. Mordike, eds., Springer, Berlin, 2006, pp. 63–107.
3. B.L. Mordike and T. Elbert: Mater. Sci. Eng. A, 2001 vol. 302, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
4. S. Biswas, S.S. Dhinwal and S. Suwas: Acta. Mater., 2010, vol. 58, pp. 3247–61.10.1016/j.actamat.2010.01.051 ↗
5. A. Balasundaram and A.M. Gokhale: Mater. Charater., 2001, vol. 46, p. 419.10.1016/S1044-5803(01)00141-3 ↗
6. A.K. Dahl, S. Sannes, D.H. St. John, and H. Westengen: J. Light Metals, 2001, vol. 1, p. 9.10.1016/S1471-5317(01)00002-5 ↗
7. J.P. Weiler and T.J. Wood: Mater. Sci. Eng. A, 2009, vol. 527, pp. 25–31.10.1016/j.msea.2009.08.060 ↗
8. D.G.L. Prakash, D. Regener and W.J.J. Vorster: Mater. Sci. Eng. A, 2008, vol. 488, pp. 303–310.10.1016/j.msea.2007.11.011 ↗
9. D.G.L. Prakash, D. Regener and W.J.J. Vorster: J. Alloys Compd., 2009, vol. 470, pp. 111–16.10.1016/j.jallcom.2008.02.051 ↗
10. H. Hu, M. Zhou, Z. Sun and N. Li: J. Mater. Proc. Technol., 2008, vol. 2, pp. 364–68.10.1016/j.jmatprotec.2007.11.275 ↗
11. J. Song, S.-M. Xiong, M.Li and J. Allison: J. Alloys Compd., 2009, vol. 477, pp. 863–69.10.1016/j.jallcom.2008.11.040 ↗
12. J. Song, S.-M. Xiong, M. Li and J.Allison: Mater. Sci. Eng. A, 2009, vol. 520, pp. 197–201.10.1016/j.msea.2009.05.042 ↗
13. Y. Lu, F. Taheri, and M. Gharghouri: J. Alloys Compd., 2008, vol. 466, pp. 214–27.10.1016/j.jallcom.2007.11.115 ↗
14. Y. Lu, F. Taheri, M. Gharghouri and H.P. Han: J. Alloys Compd., 2009, vol. 470, pp. 202–213.10.1016/j.jallcom.2008.03.008 ↗
15. S.G. Lee, G.R. Patel, A.M. Gokhale, A. Sreeranganathan and M.F. Horstemeyer: Mater. Sci. Eng. A, 2006, vol. 427, pp. 255–62.10.1016/j.msea.2006.04.108 ↗
16. S.G. Lee, G.R. Patel, A.M. Gokhale, A. Sreeranganathan and M.F. Horstemeyer: Scripta Mater., 2005, vol. 53, pp. 851–56.10.1016/j.scriptamat.2005.06.002 ↗
17. C.D. Lee: Mater. Sci. Eng. A, 2007, vol. 459, pp. 355–60.10.1016/j.msea.2007.01.008 ↗
18. C.D. Lee: Mater. Sci. Eng. A, 2007, vol. 454–455, pp. 575–80.10.1016/j.msea.2006.11.064 ↗
19. C.H. Cáceres, J.R. Griffiths, A.R. Pakdel and C.J. Davidson: Mater. Sci. Eng. A, 2005, vol. 402, pp. 258–68.10.1016/j.msea.2005.04.042 ↗
20. C.H. Cáceres, W.J. Poole, A.L. Bowles, and C.J. Davidson: Mater. Sci. Eng. A, 2005, vol. 402, pp. 269–77.10.1016/j.msea.2005.04.024 ↗
21. S.G. Lee and A.M. Gokhale: Scripta Mater., 2006, vol. 55, pp. 387–90.10.1016/j.scriptamat.2006.04.040 ↗
22. S. Otarawanna, C.M. Gourlay, H.I. Laukli and A.K.Dahle: Mater. Character., 2009, vol. 60, pp. 1432-41.10.1016/j.matchar.2009.06.016 ↗
23. S.G. Lee, G.R. Patel and A.M. Gokhale: Mater. Character., 2005, vol. 55, pp. 219-24.10.1016/j.matchar.2005.05.009 ↗
24. S. Barbagallo, H.I. Laukli, O. Lohne and E. Cerri: J. Alloys Compd., 2004, vol. 378, pp. 226–32.10.1016/j.jallcom.2003.11.174 ↗
25. D.G.L. Prakash and D. Regener: J. Alloys Compd., 2008, vol. 461, pp. 139–46.10.1016/j.jallcom.2007.07.017 ↗
26. D.G.L. Prakash and D. Regener, J. Alloys Compd., 2009, vol. 467, pp. 271–77.10.1016/j.jallcom.2007.12.046 ↗
27. M.S. Dargusch, M. Nave, S.D. McDonald and D.H. St. John, J. Alloys Compd., 2010, vol. 492, pp. 64–68.10.1016/j.jallcom.2009.11.199 ↗
28. M. Wu and S. Xiong, J. Mater. Sci. Technol., 2011, vol. 27, pp. 1150-56.10.1016/S1005-0302(12)60011-5 ↗
29. J.P. Weiler, J.T. Wood, R.J. Klassen, R. Berkmortel, and G. Wang: Mater. Sci. Eng. A, 2006, vol. 419, pp. 297–305.10.1016/j.msea.2006.01.034 ↗
30. L. Hu, S. Chen, Y. Miao, and Q. Meng: Appl. Surf. Sci., 2012, doi:10.1016/j.apsusc.2012.08.116.10.1016/j.apsusc.2012.08.116 ↗
31. L. Shepeleva and M. Bamberger: Mater. Sci. Eng. A, 2006, vol. 425, pp. 312–17.10.1016/j.msea.2006.03.091 ↗
32. M.S. Dargusch, S.M. Zhu, J.F. Nie and T.L. Dunlop: Scripta Mater., 2009, vol 60, pp. 116–19.10.1016/j.scriptamat.2008.09.013 ↗
33. I.P. Moreno, T.K. Nandy, J.W. Jones, J.E. Allison, and T.M. Pollock: Scripta Mater., 2001, vol. 45, pp. 1423–29.10.1016/S1359-6462(01)01179-4 ↗
34. W. Xiao, S. Zhu, M.A. Easton, M.S. Dargusch, M.A. Gibson, and J.F. Nie: Mater. Charact., 2012, vol. 65, pp. 28–36.10.1016/j.matchar.2012.01.001 ↗
35. W. Xiao, M.A. Easton, M.S. Dargusch, S. Zhu and M.A. Gibson: Mater. Sci. Eng. A, 2012, vol. 539, pp. 177–84.10.1016/j.msea.2012.01.077 ↗
36. S.M. Zhu, M.A. Gibson, M.A. Easton, and J.F. Nie: Scripta Mater., 2010, vol. 63, pp. 698–703.10.1016/j.scriptamat.2010.02.005 ↗
37. F. Mert, C. Blawert, K.U. Kainer, and N. Hort: Corrosion Sci., 2012, doi:http://dx.doi.org/10.1016/j.corsci.2012.08.011.10.1016/j.corsci.2012.08.011 ↗
38. J. Zhang, M. Zhang, J. Meng, R. Wu and D. Tan: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2527–37.10.1016/j.msea.2009.12.048 ↗
39. S.G. Lee and A.M. Gokhale: Scripta Mater., 2007, vol. 56, pp. 501–04.10.1016/j.scriptamat.2006.11.012 ↗
40. A.V. Nagasekhar, C.H. Cáceres and C. Kong: Mater. Charact., 2010, vol. 61, pp. 1035-42.10.1016/j.matchar.2010.06.007 ↗
41. S.G. Lee, A.M. Gokhale and A. Sreeranganathan: Mater. Sci. Eng. A, 2006, vol. 427, pp. 92–98.10.1016/j.msea.2006.04.095 ↗
42. J.P. Weiler, T.J. Wood, R.J. Klassen, E. Maire, R. Berkmortel and G. Wang: Mater. Sci. Eng. A, 2005, vol. 395, pp. 315–22.10.1016/j.msea.2004.12.042 ↗
43. C.H. Cáceres, C.J. Davidson, J.R. Griffiths and C.L. Newton: Mater. Sci. Eng. A, 2002, vol. 325, pp. 344–55.10.1016/S0921-5093(01)01467-8 ↗
44. E. Cerri, P. Leo and P.P. De Marco: J. Mater. Proc. Technol., 2007, vol. 189, pp. 97–106.10.1016/j.jmatprotec.2007.01.010 ↗
45. S.G. Lee, G.R. Patel and A.M. Gokhale: Scripta Mater., 2005, vol. 52, pp. 1063–68.10.1016/j.scriptamat.2005.01.007 ↗
46. Z. Shan and A.M. Gokhale: Mater. Sci. Eng. A, 2003, vol. 361, pp. 267–74.10.1016/S0921-5093(03)00529-X ↗
47. E. Aghion, N. Moscovitch and A. Arnon: Mater. Sci. Eng. A, 2007, vol. 447, pp. 341–46.10.1016/j.msea.2006.10.065 ↗
48. D.G.L. Prakash, D. Regener, W.J.J. Vorster: Comput. Mater. Sci., 2008, vol. 43, pp. 759–66.10.1016/j.commatsci.2008.01.040 ↗
49. K.V. Yang, C.H. Cáceres, A.V. Nagasekhar and M.A. Easton: Mater. Sci. Eng. A, 2012, vol. 542, pp. 49–55.10.1016/j.msea.2012.02.029 ↗
50. M.S. Dargusch, M.A. Easton, S.M. Zhu and G. Wang: Mater. Sci. Eng. A, 2009, vol. 523, pp. 282–88.10.1016/j.msea.2009.06.015 ↗
51. G. Gu, S. Lin, Y. Xia and Q. Zhou: Mater. Des., 2012, vol. 38, pp. 124–32.10.1016/j.matdes.2012.02.015 ↗
52. M. Chiumenti, C. Agelet de Saracibar, and M. Cervera: J. Heat Transf., 2008, vol, 130, pp. 1–10.10.1115/1.2897923 ↗
53. C. Agelet de Saracibar, M. Cervera and M. Chiumenti: Int. J. Plasticity, 1999, vol. 15, pp. 1-34.10.1016/S0749-6419(98)00055-2 ↗
54. M. Cervera, C. Agelet de Saracibar and M. Chiumenti: Int. J. Numer. Methods Eng., 1999, vol. 46, pp. 1575-91.10.1002/(SICI)1097-0207(19991130)46:9<1575::AID-NME713>3.0.CO;2-D ↗
55. A.K. Dahle, S. Sannes, D.H. St. John, and H. Westengen: J. Light Met., vol. 2001, pp. 99–103.10.1016/S1471-5317(01)00002-5 ↗
56. X.-S. Wang and J.H. Fang: J. Mater. Sci., 2004, vol. 39, pp. 2617-20.10.1023/B:JMSC.0000020042.71571.ce ↗
57. D. Lahaie, J.D. Embury, M.M. Chadwich and G.T. Gray: Scripta Metall., 1992, vol. 27, pp. 139–42.10.1016/0956-716X(92)90102-K ↗
58. M. Mabuchi, K. Hubota, and K. Higashi: Mater. Trans. JIM, 1995, vol. 36, pp. 1249–54.10.2320/matertrans1989.36.1249 ↗
59. G. Nussbaum, P. Sainfort and G. Regazzoni: Scripta Metall., 1989, vol. 23, pp. 1079–84.10.1016/0036-9748(89)90303-7 ↗
60. Y. Chino and M. Mabuchi: Adv. Eng. Mater., 2001, vol. 3, pp. 981–83.10.1002/1527-2648(200112)3:12<981::AID-ADEM981>3.0.CO;2-X ↗
61. G. Nussbaum, P. Bridot, T.J. Warner, J. Charbonnier, and G. Regazzon: Magnesium Alloys and Their Applications, B.L. Mordike and F. Hehmann, eds., DGM, Germany, 1992, pp. 351–58.
62. S.-B. Yi, C.H.J. Davies, H.-G. Brokmeier, R.E. Bolmaro, K.U. Kainer and J. Homeyer: Acta Mater., 2006, vol. 54, pp. 549-62.10.1016/j.actamat.2005.09.024 ↗
63. T.L. Anderson: Fracture Mechanics Fundamentals and Applications, CRC Press, Boca Raton, FL, 1994, pp. 34, 279.
64. D.M. Lee, B.K. Suh, B.G. Kim, J.S. Lee and C.H. Lee: Mater. Sci. Technol., 1997, vol. 13, pp. 590-95.10.1179/026708397790302449 ↗
65. H. Ding, L. Liu, S. Kamado, W. Ding and Y. Kojima: J. Alloys Compd., 2008, vol. 456, pp. 400–06.10.1016/j.jallcom.2007.02.045 ↗
66. C.H. Cáceres and B.I. Selling: Mater Sci. Eng., 1996, vol. 220, pp. 109–116.10.1016/S0921-5093(96)10433-0 ↗