journal article·2010-07

Specimen Size Effects on Zr-Based Bulk Metallic Glasses Investigated by Uniaxial Compression and Spherical Nanoindentation

H. Bei, Z.P. Lu, S. Shim, G. Chen, E.P. George

Publisher page

Abstract

Specimen size effects on the mechanical behavior of Zr-based bulk metallic glasses (BMGs) were investigated by compression and nanoindentation tests. In compression, even at the 1- to 10-mm scale, stable shear band propagation and extensive plastic deformation can be achieved in small (2 mm) specimens, in contrast to large (6.5 mm) specimens, which fail catastrophically after limited plastic deformation. The yield strength is independent of specimen size in this range, and plastic deformation remains highly localized in a few shear bands even in those specimens that exhibit stable shear sliding. The fracture surfaces of small specimens are smooth, without the vein patterns normally observed as characteristic features on the fracture surfaces of BMGs. During spherical nanoindentation, it is found that the upper bound of the maximum shear stress to initiate plasticity (yielding) in a Zr-based BMG is almost constant for indenter radii smaller than ~90 µm. However, the lower bound of this maximum shear stress decreases with increasing indenter radius, probably due to the increased probability of finding defects underneath larger indenters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallic Glasses and Amorphous Alloys · Microstructure and mechanical properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. N.A. Fleck, G.M. Muller, M.F. Ashby, and J.W. Hutchinson: Acta Metall. Mater., 1994, vol. 42, pp. 475–87.10.1016/0956-7151(94)90502-9 ↗
2. J.S. Stolken and A.G. Evans: Acta Mater., 1998, vol. 46, pp. 5109–15.10.1016/S1359-6454(98)00153-0 ↗
3. W.D. Nix and H.J. Gao: J. Mech. Phys. Solids, 1998, vol. 46, pp. 411–25.10.1016/S0022-5096(97)00086-0 ↗
4. J.G. Swadener, E.P. George, and G.M. Pharr: J. Mech. Phys. Solids, 2002, vol. 50, pp. 681–94.10.1016/S0022-5096(01)00103-X ↗
5. M.D. Uchic, D.M. Dimiduk, J.N. Florando, and W.D. Nix: Science, 2004, vol. 305, pp. 986–89.10.1126/science.1098993 ↗
6. D.M. Dimiduk, C. Woodward, R. LeSar, and M.D. Uchic: Science, 2006, vol. 312, pp. 1188–90.10.1126/science.1123889 ↗
7. C.A. Volkert and E.T. Lilleodden: Philos. Mag., 2006, vol. 86, pp. 5567–79.10.1080/14786430600567739 ↗
8. J.R. Greer and W.D. Nix: Phys. Rev. B, 2006, vol. 73, art. no. 245410.10.1103/PhysRevB.73.245410 ↗
9. K.S. Ng and A.H.W. Ngan: Acta Mater., 2008, vol. 56. pp. 1712–20.10.1016/j.actamat.2007.12.016 ↗
10. H. Bei, S. Shim, E.P. George, M.K. Miller, E.G. Herbert, and G.M. Pharr: Scripta Mater., 2007, vol. 57, pp. 397–400.10.1016/j.scriptamat.2007.05.010 ↗
11. D. Kiener, C. Motz, M. Rester, M. Jenko, and G. Dehm: Mater. Sci. Eng. A, 2007, vol. 459, pp. 262–72.10.1016/j.msea.2007.01.046 ↗
12. Z.W. Shan, R.K. Mishra, S.A.S. Asif, O.L. Warren, and A.M. Minor: Nat. Mater., 2008, vol. 7, pp. 115–19.10.1038/nmat2085 ↗
13. H. Bei, S. Shim, G.M. Pharr, and E.P. George: Acta Mater., 2008, vol. 56, pp. 4762–70.10.1016/j.actamat.2008.05.030 ↗
14. Q. Zheng, S. Cheng, J.H. Strader, E. Ma, and J. Xu: Scripta Mater., 2007, vol. 56, pp. 161–64.10.1016/j.scriptamat.2006.09.023 ↗
15. C. J. Lee, J.C. Huang, and T.G. Nieh: Appl. Phys. Lett., 2007, vol. 91, art. no. 161913.10.1063/1.2800313 ↗
16. B.E. Schuster, Q. Wei, T.C. Hufnagel, and K.T. Ramesh: Acta Mater., 2008, vol. 56, pp. 5091–5100.10.1016/j.actamat.2008.06.028 ↗
17. S.X. Song, Y.H. Lai, J.C. Huang, and T.G. Nieh: Appl. Phys. Lett., 2009, vol. 94, art. no. 061911.10.1063/1.3081111 ↗
18. Y. Yang, J.C. Ye, J. Lu, F.X. Liu, and P.K. Liaw: Acta Mater., 2009, vol. 57, pp. 1613–23.10.1016/j.actamat.2008.11.043 ↗
19. C.A. Volkert, A. Donohue, and F. Spaepen: J. Appl. Phys., 2008, vol. 103, art. no. 083539.10.1063/1.2884584 ↗
20. S. Cheng, X.L. Wang, H. Choo, and P.K. Liaw: Appl. Phys. Lett., 2007, vol. 91, art. no. 201917.10.1063/1.2813623 ↗
21. S. Xie and E.P. George: Intermetallics, 2008, vol. 16, pp. 485–89.10.1016/j.intermet.2007.11.013 ↗
22. Z. Han, W.F. Wu, Y. Li, Y.J. Wei, and H.J. Gao: Acta Mater., 2009, vol. 57, pp. 1367–72.10.1016/j.actamat.2008.11.018 ↗
23. W.F. Wu, Z. Han, and Y. Li: Appl. Phys. Lett., 2008, vol. 93, art. no. 061908.10.1063/1.2969784 ↗
24. Y.J. Huang, J. Shen, and J.F. Sun: Appl. Phys. Lett., 2007, vol. 90, art. no. 081919.10.1063/1.2696502 ↗
25. Y. Liu, H. Bei, C.T. Liu, and E.P. George: Appl. Phys. Lett., 2007, vol. 90, art. no. 071909.10.1063/1.2678909 ↗
26. S. Shim, H. Bei, E.P. George, and G.M. Pharr: Scripta Mater., 2008, vol. 59, pp. 1095–98.10.1016/j.scriptamat.2008.07.026 ↗
27. H. Bei, Z.P. Liu, and E.P. George: Phys. Rev. Lett., 2005, vol. 93, art. no. 125504.
28. C.E. Packard and C.A. Schuh: Acta Mater., 2007, vol. 55, pp. 5348–58.10.1016/j.actamat.2007.05.054 ↗
29. Z.P. Lu, H. Bei, Y. Wu, G.L. Chen, E.P. George, and C.T. Liu: Appl. Phys. Lett., 2008, vol. 92, art. no. 011915.10.1063/1.2828981 ↗
30. H. Bei, E.P. George, J.L. Hay, and G.M. Pharr: Phys. Rev. Lett., 2004, vol. 95, art. no. 045501.10.1103/PhysRevLett.95.045501 ↗
31. S.X. Song, H. Bei, J. Wadsworth, and T.G. Nieh: Intermetallics, 2008, vol. 16, pp. 813–18.10.1016/j.intermet.2008.03.007 ↗
32. H. Bei, Y.F. Gao, S. Shim, E.P. George, and G.M. Pharr: Phys. Rev. B, 2008, vol. 77, art. no. 060103.10.1103/PhysRevB.77.060103 ↗
33. K.L. Johnson: Contact Mechanics, Cambridge University, Cambridge, United Kingdom, 1985, pp. 90–95.10.1017/CBO9781139171731 ↗