Microstructure of Equal-Channel Angular Pressed Cu and Cu-Zr Samples Studied by Different Methods
Source abstract
Abstract
Polycrystalline samples of technical-purity Cu (99.95 wt pct) and Cu with 0.18 wt pct Zr have been processed at room temperature by equal-channel angular pressing (ECAP). The microstructure evolution and its fragmentation after ECAP were investigated by transmission electron microscopy (TEM), electron backscattered diffraction (EBSD), positron annihilation spectroscopy (PAS), and by X-ray diffraction (XRD) line-profile analysis. The first two techniques revealed an increase in the fraction of high-angle grain boundaries (HAGBs), with increasing strain reaching the value of 90 pct after eight ECAP passes. The increase was more pronounced for pure Cu samples. The following two kinds of defects were identified in ECAP specimens by PAS: (1) dislocations that represent the dominant kind of defects and (2) small vacancy clusters (so-called microvoids). A detailed XRD line-profile analysis was performed by the analysis of individual peaks and by total profile fitting. A slight increase in the dislocation density with the number of ECAP passes agreed with the PAS results. Variations in microstructural features obtained by TEM and EBSD can be related to the changes in the XRD line-broadening anisotropy and dislocation-correlation parameter.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Fusion materials and technologies · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. R.Z. Valiev, R.K. Islamgaliev, and V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
2. Investigations and Applications of Severe Plastic Deformation, T.C. Lowe and R.Z. Valiev, eds., Kluwer, Dordrecht, The Netherlands, 2000.
3. B. Mingler, H.P. Karnthaler, M. Zehetbauer, and R.Z. Valiev: Mater. Sci. Eng., A, 2001, vols. A319–A321, pp. 242–45.10.1016/S0921-5093(01)00975-3 ↗
4. O.V. Mishin, D. Juul Jensen, and N. Hansen: Mater. Sci. Eng., A, 2003, vol. A342, pp. 320–28.10.1016/S0921-5093(02)00311-8 ↗
5. F.H. Dalla Torre, R. Lapovok, J. Sandlin, P.F. Thomson, C.H.J. Davies, and E.V. Pereloma: Acta Mater., 2004, vol. 52, pp. 4819–32.10.1016/j.actamat.2004.06.040 ↗
6. J. Lian, R.Z. Valiev, and B. Baudelet: Acta Metall., 1995, vol. 43, pp. 4165–70.10.1016/0956-7151(95)00087-C ↗
7. Y. Estrin, R.J. Hellmig, and H.S. Kim: J. Metastable Nanocryst. Mater., 2003, vol. 17, pp. 29–36.10.4028/www.scientific.net/JMNM.17.29 ↗
8. C. Xu, M. Furukawa, Z. Horita, and T.G. Langdon: J. Alloys Compd., 2004, vol. 378, pp. 27–34.10.1016/j.jallcom.2003.10.065 ↗
9. K.S. Siow, A.A.O. Tay, and P. Oruganti: Mater. Sci. Technol., 2004, vol. 20, pp. 285–94.10.1179/026708304225010460 ↗
10. P.G. Sanders, J.A. Eastman, and J.R. Weertman: Acta Mater., 1997, vol. 45, pp. 4019–25.10.1016/S1359-6454(97)00092-X ↗
11. S.R. Agnew and J.R. Weertman: Mater. Sci. Eng., A, 1998, vol. A244, pp. 145–53.10.1016/S0921-5093(97)00689-8 ↗
12. P.G. Sanders, M. Rittner, E. Kiedaish, J.R. Weertman, H. Kung, and Y.C. Lu: Nanostruct. Mater., 1997, vol. 9, pp. 433–40.10.1016/S0965-9773(97)00096-2 ↗
13. Y. Estrin, L.S. Tóth, A. Molniari, and Y. Bréchet: Acta Mater., 1998, vol. 46, pp. 5509–22.10.1016/S1359-6454(98)00196-7 ↗
14. S.C. Baik, Y. Estrin, H.S. Kim, and R.J. Hellmig: Mater. Sci. Eng., A, 2003, vol. A351, pp. 86–97.10.1016/S0921-5093(02)00847-X ↗
15. K.T. Aust, U. Erb, and G. Palumbo: Mater. Sci. Eng., A, 1994, vol. A176, pp. 329–34.10.1016/0921-5093(94)90995-4 ↗
16. N.Q. Chinh, J. Gubicza, and T.G. Langdon: J. Mater. Sci., 2007, vol. 42, pp. 1594–1605.10.1007/s10853-006-0900-3 ↗
17. F.H. Dalla Torre, A.Z. Gazder, E.V. Pereloma, and C.H.J. Davis: J. Mater. Sci., 2007, vol. 42, pp. 1622–37.10.1007/s10853-006-1283-1 ↗
18. J. Čížek, I. Procházka, R. Kužel, and R.K. Islamgaliev: Monatsh. Chem., 2002, vol., pp. 873–87.10.1007/s007060200059 ↗
19. M. Janeček, B. Hadzima, R.J. Hellmig, and Y. Estrin: Metallic Mater., 2005, vol. 43A, pp. 258–71.
20. P. Hautojärvi and C. Corbel: in Proc. Int. School Phys.: Enrico Fermi, A. Dupasquier and A.P. Mills, eds., course CXXV, IOS Press, Varena, Italy, 1995, p. 491.
21. F. Bečvář, J. Čížek, and L. Lešták: Nucl. Instrum. Methods A., 2000, vol. 443, pp. 557–77.10.1016/S0168-9002(99)01156-0 ↗
22. I. Procházka, I. Novotný, and F. Bečvář: Mater. Sci. Forum, 1997, vols. 255–257, pp. 772–74.10.4028/www.scientific.net/MSF.255-257.772 ↗
23. Z. Matěj, L. Nichtová, and R. Kužel: Mater. Struct., 2008, vol. 15, pp. 46–49, open access: http://www.xray.cz/ms.
24. M.H. Shih, C.Y. Yu, P.W. Kao, and C.P. Chang: Scripta Mater., 2001, vol. 45, pp. 793–99.10.1016/S1359-6462(01)01098-3 ↗
25. Y.M. Wang and E. Ma: Appl. Phys. Lett., 2003, vol. 83, pp. 3165–67.10.1063/1.1618370 ↗
26. DA. Hughes and N. Hansen: Acta Mater., 1997, vol. 45, pp. 3871–86.10.1016/S1359-6454(97)00027-X ↗
27. O.V. Mishin, D. Juul Jensen, and N. Hansen: Proc. 21st Risø Int. Symp. Mater. Sci.: Recrystallisation-Fundamental Aspects and Relations to Deformation Microstructure, N. Hansen, D. Huang, and D. Juul Jensen, eds., National Laboratory, Roskilde, Denmark, 2000, pp. 445–49.
28. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479–87.10.1016/0001-6160(66)90168-4 ↗
29. J.K. Mackenzie: Acta Metall., 1964, vol. 12, pp. 223–25.10.1016/0001-6160(64)90191-9 ↗
30. M. Dopita, M. Janeček, D. Rafaja, J. Uhlíř, Z. Matěj, and R. Kužel: Int. J. Mat. Res., 2009, vol. 100, p. 6, DOI: 10.3139/146.110111.10.3139/146.110111 ↗
31. C.X. Huang, K. Wang, S.D. Wu, Z.F. Zhang, G.Y. Li, and S.X. Li: 2006 Acta Mater. vol. 54, pp. 655–65.10.1016/j.actamat.2005.10.002 ↗
32. X.Z. Liao, Y.H. Zhao, S.G. Srinivasan, Y.T. Zhh, R.Z. Valiev, and D.V. Gunderov: Appl. Phys. Lett., 2004, vol. 84, p. 592, DOI: 10.1063/1644051.10.1063/1.1644051 ↗
33. J.W. Christian and S. Mahajan: Prog. Mater. Sci., 1995, vol. 39, pp. 1–157.10.1016/0079-6425(94)00007-7 ↗
34. E. El-Danaf, S.R. Kalidindi, and R.D. Doherty: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1223–33.10.1007/s11661-999-0272-9 ↗
35. V. Randle: Acta Mater., 2004, vol. 52, pp. 4067–81.10.1016/j.actamat.2004.05.031 ↗
36. B. Barbiellini, M.J. Puska, T. Torsti, and R.M. Nieminen: Phys. Rev. B, 1994, vol. 51, pp. 7341–44.10.1103/PhysRevB.51.7341 ↗
37. T.A. McKee, S. Saimoto, A.T. Stewart, and M.J. Scott: Can. J. Phys., 1974, vol. 52, pp. 759–65.10.1139/p74-104 ↗
38. J. Čížek, I. Procházka, P. Vostrý, F. Chmelík, and R.K. Islamgaliev: Acta Phys. Pol., A, 1999, vol. 95, pp. 487–92.10.12693/APhysPolA.95.487 ↗
39. J. Čížek, I. Procházka, M. Cieslar, R. Kužel, J. Kuriplach, F. Chmelík, I. Stulíkova, F. Bečvář, and O. Melikhova: Phys. Rev. B, 2002, vol. 65, p. 094106.10.1103/PhysRevB.65.094106 ↗
40. Program Difpatan: http://krystal.karlov.mff.cuni.cz/priv/kuzel/difpatan/default.htm.
41. Th.H. de Keijser, J.I. Langford, E.J. Mittemeijer, and A.B.P. Vogels: J. Appl. Cryst., 1982, vol. 15, pp. 308–13.10.1107/S0021889882012035 ↗
42. Z. Matěj, R. Kužel, M. Dopita, M. Janeček, J. Čížek, and T. Brunátová: Int. J. Mater. Sci., 2009, vol. 100, DOI: 10.3139/146.110112.10.3139/146.110112 ↗
43. M.A. Krivoglaz, O.V. Martynenko, and K.P. Ryaboshapka: Fiz. Met. Metalloved., 1983, vol. 55, pp. 5–17.
44. R. Kužel: Z. Kristallogr., 2007, vol. 222, pp. 136–49.10.1524/zkri.2007.222.3-4.136 ↗
45. E. Wu, A. MacGray, E. H. Kisi: J. Appl. Cryst., 1998, vol. 31, pp. 356–62.10.1107/S002188989701217X ↗
46. M. Leoni, T. Confente, and P. Scardi: Z. Kristallogr., 2006, suppl. 23, pp. 249–54.10.1524/zksu.2006.suppl_23.249 ↗
47. M. Leoni, J. Martinez-Garcia, and P. Scardi: J. Appl. Crystallogr., 2007, vol. 40, pp. 719–24.10.1107/S002188980702078X ↗
48. P. Scardi and M. Leoni: J. Appl. Crystallogr., 2006, vol. 39, pp. 24–31.10.1107/S0021889805032978 ↗
49. L. Balogh, J. Gubicza, R.J. Hellmig, Y. Estrin, and T. Ungár: Z. Kristallogr., 2006, suppl. 23, pp. 318–86.10.1524/zksu.2006.suppl_23.381 ↗