journal article·2016-01

The Portevin–Le Châtelier Effect in a Metastable Austenitic Stainless Steel

Alexandra Müller, Christian Segel, Mikhail Linderov, Alexei Vinogradov, Anja Weidner, Horst Biermann

Publisher page

Abstract

The Portevin–Le Châtelier (PLC) effect was investigated in a high-alloy metastable CrMnNi cast steel during tensile tests for the range of deformation temperatures between 293 K and 413 K (20 °C and 140 °C) and for nominal strain rates ranging between 10−4 and 10−1 s−1. Analysis of the stress–strain curves was complemented by in situ measurements of thermal and acoustic emissions as well as by digital image correlation, enabling determination of various local characteristics of plastic flow and clarification of individual contributions of different microscopic mechanisms involved in plastic deformation. It was shown that the PLC effect in the investigated CrMnNi steel was caused by the diffusion of interstitial atoms in the bcc phases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. A. Weiß, H. Gutte, and P.R. Scheller: Steel Res. Int., 2006, vol. 77, pp. 727-733.10.1002/srin.200606454 ↗
2. A. Jahn, A. Kovalev, A. Weiß, and P.R. Scheller: Steel Res. Int., 2011, vol. 82, pp. 1108-1112.10.1002/srin.201100063 ↗
3. A. Weiß, H. Gutte, M. Radke, and P.R. Scheller: Patent Specification WO 2008/009722 A1, 2008.
4. A. Yilmaz: Sci. Tech. Adv. Mater., 2011, vol. 12, pp. 1-16.10.1088/1468-6996/12/6/063001 ↗
5. A. Portevin and F. Le Chatelier: C.R. Acad. Sci. Paris, 1923, vol. 176, pp. 507.
6. H. Dierke, M. Fischer, R. Tutsch, and L. Casarotto: Tech. Mess., 2011, vol. 78, pp. 211-217.10.1524/teme.2011.0106 ↗
7. Y. Estrin and L.P. Kubin: Acta Metall., 1990, vol. 38, p. 697.10.1016/0956-7151(90)90021-8 ↗
8. K. Chihab, Y. Estrin, L.P. Kubin, and J. Vergnol: Scripta Metall., 1987, vol. 21, p. 203.10.1016/0036-9748(87)90435-2 ↗
9. P. Hähner: Mater. Sci. Eng. A, 1996, vol. 207, pp. 216-223.10.1016/0921-5093(95)10032-6 ↗
10. E. Macherauch and H.W. Zoch (2011) Praktikum in Werkstoffkunde, pp. 186-189 Springer, Wiesbaden.10.1007/978-3-8348-9884-5 ↗
11. A. Ognjenovic: Ph.D. Thesis, Universität Dortmund, Dortmund, 2005.
12. L. Casarotto, R. Tutsch, R. Ritter, H. Dierke, F. Kose, and H. Neuhäuser: Comput. Mater. Sci., 2005, vol. 32, pp. 316-322.10.1016/j.commatsci.2004.09.037 ↗
13. X. Feng: Ph.D. Thesis, Universität Dortmund, Dortmund, 2008.
14. L.H. Almeida, I. Le May, and P.R.O. Emygdio: Mater. Charac., 1998, vol. 41, pp. 137-150.10.1016/S1044-5803(98)00031-X ↗
15. A.H. Cottrell and B.A. Bilby: Proc. Phys. Soc., 1948, vol. 62, pp. 49-62.10.1088/0370-1298/62/1/308 ↗
16. S.-G. Hong and S.-B. Lee: Inter. J. Fat., 2004, vol. 26, pp. 899-910.10.1016/j.ijfatigue.2003.12.002 ↗
17. S. Lee, J. Kim, S.-J. Lee, and B.C. De Cooman: Scripta Mater., 2011, vol. 65, pp. 528-531.10.1016/j.scriptamat.2011.06.017 ↗
18. J. Belotteau, C. Berdin, S. Forest, A. Parrot, C. Prioul: Mater. Sci. Eng. A, 2009, vol. 526, pp. 156-165.10.1016/j.msea.2009.07.013 ↗
19. A. Karimi Taheri, T.M. Maccagno, and J.J. Jonas: ISIJ Int., 1995, vol. 35 (12), pp. 1532–40.10.2355/isijinternational.35.1532 ↗
20. C.-C. Li, W.C. Leslie: Metall. Trans. A, 1978, vol. 9A, pp. 1765-1775.10.1007/BF02663406 ↗
21. M. Abbadi, P. Hähner, and A. Zehgloul: Mater. Sci. Eng. A, 2002, vol. 337, pp. 194-201.10.1016/S0921-5093(02)00036-9 ↗
22. H. Ait-Amokthar, C. Fressengeas, and S. Boudrahem: Mater. Sci. Eng. A, 2008, vol. 488, pp. 540-546.10.1016/j.msea.2007.11.075 ↗
23. A. Benallal, T. Berstad, T. Borvik, O.S. Hopperstad, I. Koutiri, and R. Nogueira de Codes: Inter. J. Plast., 2008, vol. 24, pp. 1916-1945.10.1016/j.ijplas.2008.03.008 ↗
24. L. Bodelot, L. Sabatier, E. Charkaluk, and P. Dufrénoy: Mater. Sci. Eng. A, 2009, vol. 501, pp. 52-60.10.1016/j.msea.2008.09.053 ↗
25. H. Ait-Amokthar and C. Fressengeas: Acta Mater., 2010, vol. 58, pp. 1342-1349.10.1016/j.actamat.2009.10.038 ↗
26. M.C. Cai, L.S. Niu, T. Yu, H.J. Shi, and X.F. Ma: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5175-5180.10.1016/j.msea.2010.05.001 ↗
27. F.B. Klose, A. Ziegenbein, J. Weidenmüller, H. Neuhäuser, and P. Hähner: Comput. Mater. Sci., 2003, vol. 26, pp. 80-86.10.1016/S0927-0256(02)00405-6 ↗
28. S.-G. Hong and S.-B. Lee: Int. J. Fat., 2004, vol. 26, pp. 899-910.10.1016/j.ijfatigue.2003.12.002 ↗
29. A. van den Beukel: Phys. Stat. Sol., 1975, vol. 30, pp. 197-206.10.1002/pssa.2210300120 ↗
30. G. W. Han, I.P. Jones, and R.E. Smallman: Acta Mater., 2003, vol. 51, pp. 2731-2742.10.1016/S1359-6454(02)00359-2 ↗
31. A. Saeed-Akbari: Ph.D. Thesis, Rheinisch-Westfälische Technische Hochschule Aachen, Aachen, 2011.
32. A. Saeed-Akbari, A.K. Mishra, J. Mayer, and W. Bleck: Met. Mat. Trans. A, 2012, vol. 43A, pp. 1705-1723.10.1007/s11661-011-1070-8 ↗
33. A. Vinogradov, A. Lazarev, M. Linderov, A. Weidner, and H. Biermann: Acta Mater., 2013, vol. 61, pp. 2434-2449.10.1016/j.actamat.2013.01.016 ↗
34. M. Linderov, C. Segel, A. Weidner, H. Biermann, and A. Vinogradov: Mater. Sci. Eng. A, 2014, vol. 597, pp. 183-193.10.1016/j.msea.2013.12.094 ↗
35. E. Pomponi and A. Vinogradov: Mech. Syst. Signal. Proc., 2013, vol. 40, pp. 791–804.10.1016/j.ymssp.2013.03.017 ↗
36. A. Weidner, A. Vinogradov, A. Lazarev, and H. Biermann: Key Eng. Mater., 2014, vol. 592-593, pp. 489-492.
37. S. Wolf: Ph.D. Thesis, Technische Universität Bergakademie Freiberg, Freiberg, 2012.
38. K. Renard, S. Ryelandt, and P.J. Jacques: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2969-2977.10.1016/j.msea.2010.01.037 ↗
39. L. Chen, H.S. Kim, S.K. Kim, and B.C. de Cooman: ISIJ Int., 2007, vol. 47, pp. 1804-1812.10.2355/isijinternational.47.1804 ↗
40. K. Peng, K. Qian, and W. Chen: Mater. Sci. Eng. A, 2004, vol. 379, pp. 372-377.10.1016/j.msea.2004.03.004 ↗
41. T. Odahara, H. Matsumoto, and A. Chiba: Mater. Trans., 2008, vol. 49, pp. 1963-1969.10.2320/matertrans.MAW200816 ↗
42. H. Ait-Amokhtarand and C. Fressengeas: Acta Mater., 2010, vol. 58, pp. 1342-1349.10.1016/j.actamat.2009.10.038 ↗
43. L.P. Kubin and Y. Estrin: Acta Metall. Mater., 1985, vol. 33, pp. 397-407.10.1016/0001-6160(85)90082-3 ↗
44. L.P. Kubin and Y. Estrin: Acta Metall. Mater., 1990, vol. 38, pp. 697-708.10.1016/0956-7151(90)90021-8 ↗
45. A. Korbel, J. Zasadzinski, and Z. Sieklucka: Acta Metall. Mater., 1976, vol. 24, pp. 919-923.10.1016/0001-6160(76)90040-7 ↗
46. A. Weidner, S. Martin, V. Klemm, U. Martin, D. Rafaja, and H. Biermann: Scripta Mater., 2011, vol. 64, pp. 513-516.10.1016/j.scriptamat.2010.11.028 ↗
47. S. Martin, C. Ullrich, D. Imek, U. Martin, and D. Rafaja: J. Appl. Cryst., 2011, vol. 44, pp. 779–787.10.1107/S0021889811019558 ↗
48. L.W. Meyer, N. Herzig, T. Halle, F. Hahn, L. Krüger, and K.P. Staudhammer: J. Mater. Proc. Technol., 2007, vol. 182, pp. 319-326.10.1016/j.jmatprotec.2006.07.040 ↗
49. A. Weidner, A. Yanina, S. Guk, R. Kawalla, and H. Biermann: Steel Res. Int., 2011, vol. 82, pp. 990-997.10.1002/srin.201100087 ↗
50. W. Räuchle, O. Vöhringer, and E. Macherauch: Mater. Sci. Eng., 1973, vol. 12, pp. 147-161.10.1016/0025-5416(73)90004-9 ↗
51. M. Mayer, O. Vöhringer, and E. Macherauch: Scripta Metall. Mater., 1975, vol. 9, pp. 1333-1339.10.1016/0036-9748(75)90450-0 ↗
52. Y. Nakada and A.S. Keh: Acta Metall., 1970, vol.18, pp. 437-43.10.1016/0001-6160(70)90129-X ↗
53. M.J. Roberts and W.S. Owen: Metall. Trans., 1970, vol. 1, pp. 3203-3213.10.1007/BF03038438 ↗
54. H. Oettel and H. Schumann: Metallografie, 14 ed., p. 363, Wiley VCH, Weinheim, 2001.
55. S.-G. Hong and S.-B. Lee: Int. J. Fatigue, 2004, vol. 26, pp. 899-910.10.1016/j.ijfatigue.2003.12.002 ↗