journal article·2017-11

The Kinetics of Precipitate Dissolution in a Nickel-Base Superalloy

S. L. Semiatin, N. C. Levkulich, A. E. Saurber, D. W. Mahaffey, E. J. Payton, O. N. Senkov

Publisher page

Abstract

The effect of microstructure and soft impingement on the kinetics of static dissolution of γ′ precipitates during supersolvus solution treatment of the powder-metallurgy nickel-base superalloy LSHR were determined experimentally and interpreted in the context of a simple diffusion model. The starting material had either a fine duplex structure of γ grains and γ′ precipitates (each of which were ~2 μm in diameter) or a structure comprising ~2-μm-diameter γ′ precipitates lying within large (~15 μm) γ grains. Using a direct-resistance-heated Gleeble® machine, the temperature of each sample was first equilibrated at a fixed subsolvus temperature (at which the microstructure was also stabilized) and then quickly raised to and held for a predetermined time in the single-phase γ field. The dissolution of γ′ was found to be approximately five times as fast for the duplex structure in comparison to the kinetics for the intragranular precipitates. The results were interpreted using numerical simulations of dissolution based on the Whelan model modified to account for a distribution of precipitates (rather than a single, isolated spherical particle) and soft impingement of diffusion fields. Using independently-measured values for diffusivity, precipitate composition, and phase equilibria as input, simulation predictions showed good agreement with the observations in terms of the temporal variation of volume fraction and average particle radius. By this means, insight into the retarding influence of soft impingement and the accelerating effect of pipe diffusion (due to stored dislocations) on the rate of dissolution was obtained
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. 1.J.W. Martin, R.D. Doherty, and B. Cantor: Stability of Microstructure in Metallic Systems, Cambridge University Press, Cambridge, UK, 1997.10.1017/CBO9780511623134 ↗
2. M. Soucail, M. Marty, and H. Ocor: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA,1996, pp. 663–66.10.7449/1996/Superalloys_1996_663_666 ↗
3. E. Huron, S. Shrivatsa, and E. Raymond: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., TMS, Warrendale, PA, 2000, pp. 49–58.10.7449/2000/Superalloys_2000_49_58 ↗
4. 4.S.L. Semiatin, K.E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang, and T.P. Gabb: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2778-2798.10.1007/s11661-013-1675-1 ↗
5. 5.S.L. Semiatin, J.M. Shank, A.R. Shiveley, W.M. Saurber, E.F. Gaussa, and A.L. Pilchak: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 6231-6251.10.1007/s11661-014-2572-y ↗
6. E.J. Payton: Ph.D. Dissertation, The Ohio State University, Columbus, OH, 2009.
7. 7.P.R. Rios: Acta Mater., 1997, vol. 45, pp. 1785-1789.10.1016/S1359-6454(96)00284-4 ↗
8. K. Song and M. Aindow: in Proc. Materials Science and Technology (MS&T) 2006: Fundamentals and Characterization, Vol. 2, Z-K. Lu, C.E. Campbell, L.Q. Chen, E. B. Damm, J.E. Morral, and J.L. Murray, eds., TMS, Warrendale, PA, 2006, pp. 211–220.
9. 9.G. Wang, D.S. Xu, E.J. Payton, N. Ma, R. Yang, M.J. Mills, and Y. Wang: Acta Mater., 2011, vol. 59, pp. 4587-4594.10.1016/j.actamat.2011.04.004 ↗
10. 10.E.J. Payton, T.A. Wynn, and M.J. Mills: J. Mater. Sci., 2012, vol. 20, pp. 7305-7311.10.1007/s10853-012-6684-8 ↗
11. 11.F. Masoumi, D. Shahriari, M. Jahazi, J. Cormier, and B.C.D. Flipo: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 2886-2899.10.1007/s11661-017-4067-0 ↗
12. 12.O.N. Senkov, D.W. Mahaffey, S.L. Semiatin, and C. Woodward: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5545-5561.10.1007/s11661-014-2512-x ↗
13. 13.M. Soucail and Y. Bienvenu: Mater. Sci. Eng. A, 1996, vol. A220, pp. 215-222.10.1016/S0921-5093(97)80011-1 ↗
14. 14.J. Cormier, X. Milhet, and J. Mendez: J. Mater. Sci., 2007, vol. 42, pp. 7780-7786.10.1007/s10853-007-1645-3 ↗
15. R. Giraud, Z. Hervier, J. Cormier, G. Saint-Martin, F. Hamon, X. Milhet, and J. Mendez: Metall. Mater. Trans. A, 2013, vol. 44, pp. 131-146.10.1007/s11661-012-1397-9 ↗
16. 16.F. Masoumi, M. Jahazi, D. Shahriari, and J. Cormier: J. Alloys Comp., 2016, vol. 658, pp. 981-995.10.1016/j.jallcom.2015.11.002 ↗
17. 17.M.J. Whelan: Metal Sci. Journal, 1969, vol. 3, pp. 95-97.10.1179/msc.1969.3.1.95 ↗
18. 18.H.B. Aaron and G.R. Kotler: Metall. Trans., 1971, vol. 2, pp. 393-408.10.1007/BF02663326 ↗
19. 19.H.B. Aaron and G.R. Kotler: Metal Sci. Journal, 1970, vol. 4, 222-225.10.1179/msc.1970.4.1.222 ↗
20. 20.G. Wang, D.S. Xu, N. Ma, N. Zhou, E.J. Payton, R. Yang, M.J. Mills, and Y. Wang: Acta Mater., 2009, vol. 57, pp. 316-325.10.1016/j.actamat.2008.09.010 ↗
21. J. Gayda, T.P. Gabb, and P.T. Kantzos: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 323–30.10.7449/2004/Superalloys_2004_323_329 ↗
22. J. Lemsky: Report NASA/CR-2005-213574, Ladish Company, Inc., Cudahy, WI, February 2005 (available electronically at http://gltrs.grc.nasa.gov).
23. 23.S.L. Semiatin, K. E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang, and T.P. Gabb: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1649-1661.10.1007/s11661-011-1035-y ↗
24. 24.S.L. Semiatin, S-L. Kim, F. Zhang, and J.S. Tiley: Metall. and Mater. Trans. A, 2015, vol. 46A, pp. 1715-1730.10.1007/s11661-015-2748-0 ↗
25. D.E. DeMania: PhD Dissertation, University of Virginia, Charlottesvile, VA, 2002.
26. S.L. Semiatin, D.W. Mahaffey, N.C. Levkulich, and O.N. Senkov: Metall. Mater. Trans. A, 2017, DOI:10.1007/s11661-017-4296-2.10.1007/s11661-017-4296-2 ↗
27. 27.P.W. Voorhees and M.E. Glicksman: Acta Metall., 1984, vol. 32, pp. 2013-2030.10.1016/0001-6160(84)90181-0 ↗
28. 28.O. Grong and H.R. Shercliff: Progress in Materials Science, 2002, vol. 47, pp. 163-282.10.1016/S0079-6425(00)00004-9 ↗
29. 29.S.L. Semiatin, F. Zhang, R. Larsen, L.A. Chapman, and D.U. Furrer: Integrating Materials and Manufacturing Innovation, 2016, vol. 5, no. 3, pp. 1-20.
30. T.P. Gabb, J. Gayda, D.F. Johnson, R.A. McKay,, R.B. Rogers, C.K. Sudbrack, A. Garg, I.E. Locci, S.L. Semiatin, and E. Kang: Report NASA/TM-2016-218936, NASA Glenn Research Center, Cleveland, OH, February 2016 (available electronically at http://gltrs.grc.nasa.gov).
31. 31.I. Weiss and J.J. Jonas: Metall. Trans. A, 1979, vol. 10A, pp. 831-840.10.1007/BF02658301 ↗
32. 32.P. Louis and A. Gokhale: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1741-1744.10.1007/BF02670761 ↗