Dynamic Recrystallization and Processing Map of Pb-30Mg-9Al-1B Alloy During Hot Compression
Source abstract
Abstract
The dynamic recrystallization (DRX) behavior of Pb-30Mg-9Al-1B alloy was investigated during hot compression at temperatures ranging from 513 K to 693 K (240 °C to 420 °C) and stain rates ranging from 0.01 to 10 s−1. Based on the experimental results, the stress–strain curve shows the typical nature of DRX—that a peak flow stress is reached at low strains followed by a steady state at high strain. The correlation between flow stress, temperature, and strain rate can be well expressed by a modified sine hyperbolic type constitutive equation. The value of the Avrami exponent M (nearly equal to 1) in the Avrami equation suggests that the grain boundaries are prior to nucleation sites for DRX, and DRX is controlled by grain growth for Pb-30Mg-9Al-1B alloy. The variation of instability and cracking regions in the constructed processing maps at different strains exhibits the high sensitivity of processing maps to strains. According to the processing maps of Pb-30Mg-9Al-1B alloy, the optimized parameters for hot working were determined to be in the temperature range of 603 K to 693 K (330 °C to 420 °C) and strain rate of 0.01 to 0.1 s−1.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. M. Kawasaki, S. Lee, and T.G. Langdon: Scripta Mater., 2009, vol. 61, pp. 963–66.10.1016/j.scriptamat.2009.08.001 ↗
2. D. Gupta, K. Vieregge, and W. Gust: Acta Mater., 1998, vol. 47, pp. 5–12.10.1016/S1359-6454(98)00348-6 ↗
3. L.C. Peixoto, W.R. Osório, and A. Garcia: J. Power Sources, 2009, vol. 192, p. 724.10.1016/j.jpowsour.2009.02.081 ↗
4. T. Hirasawa, K. Sasaki, M. Taguchi, and H. Kaneko: J. Power Sources, 2000, vol. 85, pp. 44–48.10.1016/S0378-7753(99)00380-8 ↗
5. D.M. Rosa, J.E. Spinelli, W.R. Osório, and A. Garcia: J. Power Sources, 2006, vol. 162, pp 696–705.10.1016/j.jpowsour.2006.07.016 ↗
6. W.R. Osório, D.M. Rosa, and A. Garcia: J. Power Sources, 2008, vol. 175, pp. 595–603.10.1016/j.jpowsour.2007.08.091 ↗
7. Y.B. Zhou, C.X. Yang, W.F. Zhou, and H.T. Liu: J. Alloys Compd., 2004, vol. 365, pp. 108–11.10.1016/S0925-8388(03)00649-2 ↗
8. M.A. Kiani, M.F. Mousavi, S. Ghasemi, M. Shamsipur, and S.H. Kazemi: Corros. Sci., 2008, vol. 50, pp. 1035–45.10.1016/j.corsci.2007.11.031 ↗
9. V. Raman and T.C. Reiley: Metall. Trans. A, 1988, vol. 19A, pp. 1533–46.10.1007/BF02674027 ↗
10. G.L. Stukenbroeker, C.F. Bonilla, and R.W. Peterson: Nucl. Eng. Des., 1970, vol. 13, pp. 3–145.10.1016/0029-5493(70)90030-0 ↗
11. D. Rezaei-Ochbelagh and S. Azimkhani: Appl. Radiat. Isotopes, 2012, vol. 70, pp. 2282–86.10.1016/j.apradiso.2012.06.020 ↗
12. M. Erdem, O. Baykara, M. Doğru, and F. Kuluöztürk: Radiat. Phys. Chem., 2010, vol. 79, pp. 917–22.10.1016/j.radphyschem.2010.04.009 ↗
13. Y.H. Duan, Y. Sun, Z.Z. Guo, and J.H. He: J. Funct. Mater., 2012, vol. 43, pp. 334–37.
14. R. Hultgren, P.D. Dessai, D.T. Hawkins, M. Gleiser, and K.K. Kelley: Selected Values of the Thermodynamic Properties of Binary Alloy, ASM, Metal Park, OH, 1973. pp. 154–56.
15. Y.H. Duan, Y. Sun, M.J. Peng, and Z.Z. Guo: Solid State Sci., 2011, vol. 13, pp. 455–59.10.1016/j.solidstatesciences.2010.12.011 ↗
16. Y.H. Duan, Y. Sun, J. Feng, and M.J. Peng: Physica B, 2010, vol. 405, pp. 701–04.10.1016/j.physb.2009.09.090 ↗
17. Y.H. Duan, Y. Sun, M.J. Peng, Z.Z. Guo, and P.X. Zhu: J. Mater. Eng. Perform., 2012, vol. 21, pp. 973–76.10.1007/s11665-011-9965-5 ↗
18. H.Z. Li, H.J. Wang, Z. Li, C.M. Liu, and H.T. Liu: Mater. Sci. Eng. A, 2010, vol. 528, pp. 154–60.10.1016/j.msea.2010.08.090 ↗
19. A. Momeni, K. Dehghani, H. Keshmiria, and G.R. Ebrahimi: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1605–11.10.1016/j.msea.2009.10.051 ↗
20. Y.C. Lin, M.S. Chen, and J. Zhong: Comput. Mater. Sci., 2008, vol. 42, pp. 470–77.10.1016/j.commatsci.2007.08.011 ↗
21. Z. Zang, K. Mukai, P. Navaretti, M. Duelk, C. Velez, and K. Hamamoto: Appl. Phys. Lett., 2012, vol. 100, pp. 031108–031114.10.1063/1.3678188 ↗
22. Z. Zang, T. Minato, P. Navaretti, Y. Hinokuma, M. Duelk, C. Velez, and K. Hamamoto: IEEE Photonics Tech. Lett., 2010, vol. 10, pp. 721–23.10.1109/LPT.2010.2044994 ↗
23. Y.D. Jia, F.Y. Cao, S. Guo, P. Ma, J.S. Liu, and J.F. Sun: Mater. Des., 2014, vol. 53, pp. 79–85.10.1016/j.matdes.2013.06.053 ↗
24. Y.V.R.K. Prasad and N. Ravichandran: Bull. Mater. Sci., 1991, vol. 14, pp. 1241–48.10.1007/BF02744618 ↗
25. C.M. Sellars and W.J. McTegart: Acta Metall., 1966, vol. 14, pp. 1136–38.10.1016/0001-6160(66)90207-0 ↗
26. C. Zener and J.H. Hollomon: J. Appl. Phys., 1944, vol. 15, pp. 22–27.10.1063/1.1707363 ↗
27. M.R. Rokni, A. Zarei-Hanzaki, A.A. Roostaei, and A. Abolhasani: Mater. Des., 2011, vol. 32, pp. 4955–60.10.1016/j.matdes.2011.05.040 ↗
28. R. Darveaux and K. Banerji: IEEE Trans. Compon. Hybrid Manuf. Technol., 1992, vol. 15, pp. 1013–24.10.1109/33.206925 ↗
29. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps, Pergamon Press, Oxford, United Kingdom, 1982, pp. 44–45.
30. D. Samantaray, S. Mandal, and A.K. Bhaduri: Mater. Des., 2010, vol. 31, pp. 981–84.10.1016/j.matdes.2009.08.012 ↗
31. G.R. Stewart, A.M. Elwazri, S. Yue, and J.J. Jonas: Mater. Sci. Technol., 2006, vol. 22, pp. 519–24.10.1179/026708306X81478 ↗
32. N.D. Ryan and H.J. McQueen: Can. Metall. Q., 1990, vol. 29, pp. 147–62.10.1179/cmq.1990.29.2.147 ↗
33. A. Marchattiwar, A. Sarkar, J.K. Chakravartty, and B.P. Kashyap: J. Mater. Eng. Perform., 2013, vol. 22, pp. 2168–75.10.1007/s11665-013-0496-0 ↗
34. M. Avrami: J. Chem. Phys., 1939, vol. 7, pp. 1103–12.10.1063/1.1750380 ↗
35. J.W. Cahn: Acta Metall., 1956, vol. 2, pp. 449–59.10.1016/0001-6160(56)90041-4 ↗
36. M. El Wahabi, L. Gavard, F. Montheillet, J.M. Cabrera, and J.M. Prado: Acta Mater., 2005, vol. 53, pp. 4605–12.10.1016/j.actamat.2005.06.020 ↗
37. Y.V.R.K. Prasad, H.L. Gegel, S.M. Doraivelu, J.C. Malas, J.T. Morgan, K.A. Lark, and D.R. Barker: Metall. Trans. A, 1984, vol. 15A, pp. 1883–92.10.1007/BF02664902 ↗
38. H.T. Zhou, Q.B. Li, Z.K. Zhao, Z.C. Liu, S.F. Wen, and Q.D. Wang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2022–26.10.1016/j.msea.2009.12.009 ↗
39. H. Yu, H.S. Yu, Y.M. Kim, B.S. You, and G.H. Min: Trans. Nonferrous Met. Soc. China, 2013, vol. 23, pp. 756–64.10.1016/S1003-6326(13)62526-1 ↗
40. Y.V.R.K. Prasad and T. Seshacharyulu: Int. Mater. Rev., 1998, vol. 43, pp. 243–58.10.1179/imr.1998.43.6.243 ↗
41. Y.V.R.K. Prasad: J. Mater. Eng. Perform., 2003, vol. 12, pp. 638–45.10.1361/105994903322692420 ↗
42. A.A. Nayeb-Hashemi and J.B. Clark: Bull. Alloy Phase Diagrams, 1985, vol. 6, pp. 56–66.10.1007/BF02871188 ↗
43. F. Chen, Z. Cui, and S. Chen: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5073–80.10.1016/j.msea.2011.03.008 ↗
44. J.K. Fan, H.C. Kou, M.J. Lai, B. Tang, H. Chang, and J.S. Li: Mater. Sci. Eng. A, 2013, vol. 584, pp. 121–32.10.1016/j.msea.2013.07.019 ↗
45. K.K. Deng, X.J. Wang, M.Y. Zheng, and K. Wu: Mater. Sci. Eng. A, 2013, vol. 560, pp. 824–30.10.1016/j.msea.2012.10.044 ↗