journal article·2017-04Open access

748 K (475 °C) Embrittlement of Duplex Stainless Steel: Effect on Microstructure and Fracture Behavior

Cem Örnek, M. G. Burke, T. Hashimoto, D. L. Engelberg

Abstract

Abstract 22Cr-5Ni duplex stainless steel (DSS) was aged at 748 K (475 °C) and the microstructure development correlated to changes in mechanical properties and fracture behavior. Tensile testing of aged microstructures confirmed the occurrence of 748 K (475 °C) embrittlement, which was accompanied by an increase of strength and hardness and loss of toughness. Aging caused spinodal decomposition of the ferrite phase, consisting of Cr-enriched α″ and Fe-rich α′ and the formation of a large number of R-phase precipitates, with sizes between 50 and 400 nm. Fracture surface analyses revealed a gradual change of the fracture mode from ductile to brittle delamination fracture, associated with slip incompatibility between ferrite and austenite. Ferrite became highly brittle after 255 hours of aging, mainly due to the presence of precipitates, while austenite was ductile and accommodated most plastic strain. The fracture mechanism as a function of 748 K (475 °C) embrittlement is discussed in light of microstructure development.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. J. Charles: St. Res. Int., 2008, vol. 79, pp. 455–65.10.1002/srin.200806153 ↗
2. J. Charles and S. Bernhardsson: Duplex Stainless Steels ‘91, Vol. 1, Les editions de physique, Beaune, Bourgogne, France, 1991, pp. 3–48
3. J. Charles and S. Bernhardsson: Duplex Stainless Steels ‘91, Vol. 2, Les editions de physique, Beaune, Bourgogne, France, 1991, pp. 711–18.
4. S. Li, Y. Wang, and X. Wang: Mater. Sci. Eng. A, 2015, vol. 625, pp. 186–93.10.1016/j.msea.2014.11.065 ↗
5. R.A. Lula: Duplex Stainless Steels, ASM, Mars, PA, pp. 693–756.
6. R. Pettersson and E. Johansson: Duplex World 2010, Duplex Stainless Steel World, Beaunne, France, 2010.
7. F. Wischnowski: Ph.D. Thesis, Technical University of Bochum, Bochum, Germany, 1995, p. 264.
8. O.K. Chopra and H.M. Chung: Report No. CONF-870839-8, Argonne National Laboratory Materials and Components Technology Division, Argonne, IL, June 1987.
9. K.H. Lo, C.H. Shek, and J.K.L. Lai: Mater. Sci. Eng., R, 2009, vol. 65, pp. 39–104.10.1016/j.mser.2009.03.001 ↗
10. H.-J. Eckstein: Korrosionsbeständige Stähle, Deutscher Verlag für Grundstoffindustrie GmbH, Leipzig, Germany, 1990, pp. 1–264.
11. J.K. Sahu U. Krupp, R.N. Ghosh, and H.J. Christ: Mater. Sci. Eng., A, 2009, vol. 508, pp. 1–14.10.1016/j.msea.2009.01.039 ↗
12. A. Redjaïmia, J.P. Morniroli, P. Donnadieu, and G. Metauer: J. Mater. Sci., 2002, vol. 37, pp. 4079–91.10.1023/A:1020023500133 ↗
13. T.H. Hwang, J.H. Kim, K.H. Kim, W.J. Moon, and C.Y. Kang: Met. Mater. Int., 2014, vol. 20, pp. 13–17.10.1007/s12540-014-1004-2 ↗
14. H.M. Chung and O.K. Chopra: Characterization of Advanced Materials, Springer, New York, NY, 1990, pp. 123–47.10.1007/978-1-4615-3688-8_9 ↗
15. M. Nyström and B. Karlsson: Mater. Sci. Eng., A, 1996, vol. 215, pp. 26–38.10.1016/0921-5093(96)10251-3 ↗
16. K.L. Weng, H.R. Chen, and J.R. Yang: Mater. Sci. Eng., A, 2004, vol. 379, pp. 119–32.10.1016/j.msea.2003.12.051 ↗
17. J.K. Sahu: Effect of 475 °C Embrittlement on the Fatigue Behaviour of a Duplex Stainless Steel, University of Siegen, Siegen, Germany, 2008, p. 131.
18. J.-O. Nilsson: Mater. Sci. Technol., 1992, vol. 8, pp. 685–700.10.1179/mst.1992.8.8.685 ↗
19. J.-O. Nilsson and P. Liu: Mater. Sci. Technol., 1991, vol. 7, pp. 853–62.10.1179/mst.1991.7.9.853 ↗
20. A. Mateo, L. Llanes, M. Anglada, A. Redjaimia, and G. Metauer: J. Mater. Sci., 1997, vol. 32, pp. 4533–40.10.1023/A:1018669217124 ↗
21. L. Karlsson, L. Ryen, and S. Pak: Am. Weld. Soc., 1995, pp. 28–40.
22. J.J. Shiao, C.H. Tsai, J.H. Huang, and J.J. Kai: Scripta Mater., 1993, vol. 29, pp. 1451–56.10.1016/0956-716X(93)90335-P ↗
23. A. Redjaïmia and G. Metauer: J. Mater. Sci., 2001, vol. 36, pp. 1717–25.10.1023/A:1017516407229 ↗
24. K. Yamamoto, Y. Kimura, and Y. Mishima: Mater. Trans., 2004, vol. 45, pp. 357–60.10.2320/matertrans.45.357 ↗
25. A. Redjaïmia, A. Proult, P. Donnadieu, and J.P. Morniroli: J. Mater. Sci., 2004, vol. 39, pp. 2371–86.10.1023/B:JMSC.0000019999.27065.13 ↗
26. S.-H. Byun, N. Kang, T.-H. Lee, S.-K. Ahn, H.W. Lee, W.-S. Chang, and K.-M. Cho: Met. Mater. Int., 2012, vol. 18, pp. 201–07.10.1007/s12540-012-2001-y ↗
27. A. Redjaimia, P. Ruterana, G. Metauer, and M. Gantois: Phil. Mag. A, 1993, vol. 67, pp. 1277–86.10.1080/01418619308224771 ↗
28. Charlie R. Brooks and Stephen B. Fitch: Mater. Charact., 2000, vol. 45, pp. 365–77.10.1016/S1044-5803(00)00106-6 ↗
29. H.M. Chung: Report No. CONF-890215-5, Argonne National Laboratory Materials and Components Technology Division, Argonne, IL, Feb. 1989.
30. H.M. Chung: Int. J. Press. Vessel Pip., 1992, vol. 50, pp. 179–213.10.1016/0308-0161(92)90037-G ↗
31. O.K. Chopra, H.M. Chung, T.F. Kassner, and W.J. Shack: Report No. ANL/ET/CP—87316 CONF-9510156—11, Argonne National Laboratory, Argonne, IL, Dec. 1995.
32. W. Horvath, W. Prantl, H. Stroißnigg, and E.A. Werner: Mater. Sci. Eng., A, 1998, vol. 256, pp. 227–36.10.1016/S0921-5093(98)00839-9 ↗
33. M. Ferry: Encyclopedia of Condensed Matter Physics, Elsevier, Oxford, United Kingdom, 2005, pp. 46–53.10.1016/B0-12-369401-9/00532-5 ↗
34. L.C.D. Fielding, E.J. Song, D.K. Han, H.K.D.H. Bhadeshia, and D.-W. Suh: Proceedings of the Royal Society A, 2014, vol. 470, p. 18.10.1098/rspa.2014.0108 ↗
35. D.L. Engelberg and C. Örnek: Corr. Eng., Sci. Technol., 2014, vol. 49, pp. 535–39.10.1179/1743278214Y.0000000205 ↗
36. C. Örnek, S. Idris, P. Reccagni, and D. Engelberg: Metals, 2016, vol. 6, p. 167.10.3390/met6070167 ↗
37. A. Redjaïmia, T. Otarola, and A. Mateo: in EMC 2008 14th European Microscopy Congress, Springer, Heidelberg, 2008, pp. 479–80.
38. N. Pettersson, S. Wessman, M. Thuvander, P. Hedström, J. Odqvist, R.F.A. Pettersson, and S. Hertzman: Mater. Sci. Eng. A, 2015, vol. 647, pp. 241–48.10.1016/j.msea.2015.09.009 ↗
39. J.C. de Lacerda, L.C. Cândido, and L.B. Godefroid: Int. J. Fat., 2015, vol. 74, pp. 81–87.10.1016/j.ijfatigue.2014.12.015 ↗
40. Alan Owen Humphreys: The Low Temperature Fracture Behaviour of the Super Duplex Stainless Steel Zeron 100, School of Metallurgy and Materials, The University of Birmingham, Birmingham, England, 1997, p. 220.
41. George Krauss: Steels: Processing, Structure, and Performance, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 2015.10.31399/asm.tb.spsp2.9781627082655 ↗
42. J. Pilhagen and R. Sandström: Eng. Fract. Mech., 2013, vol. 99, pp. 239–50.10.1016/j.engfracmech.2013.01.002 ↗
43. T.J. Marrow and C. Harris: Fat. Fract. Eng. Mater. Struct., 1996, vol. 19, pp. 935–47.10.1111/j.1460-2695.1996.tb01028.x ↗
44. C. Örnek and D.L. Engelberg: J. Strain. Anal. Eng. Des., 2016, vol. 51, pp. 207–19.10.1177/0309324716631669 ↗