Metal-Intermetallic Laminate Ti-Al3Ti Composites Produced by Spark Plasma Sintering of Titanium and Aluminum Foils Enclosed in Titanium Shells
Source abstract
Abstract
Metal-intermetallic laminate composites are considered as promising materials for application in the aerospace industry. In this study, Ti-Al3Ti composites enclosed in titanium cases were produced by reactive spark plasma sintering. Sintering was carried out at 1103 K and 1323 K (830 °C and 1050 °C) for 10 minutes. In both cases, high-quality Ti-Al3Ti composites containing thin transition layers at the interfaces were obtained. Al2Ti, AlTi, and AlTi3 intermetallic phases and a solid solution of aluminum in titanium were observed in the transition layers by scanning and transmission electron microscopy. The material sintered at 1323 K (1050 °C) had higher strength in comparison with the composite obtained at 1103 K (830 °C). However, the hardness of the intermetallic component in the sample sintered at higher temperature decreased due to the grain growth. The impact toughness values of both materials were approximately identical.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Aluminum Alloys Composites Properties · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. K.S. Vecchio: JOM, 2005, vol. 57, pp. 25–31.10.1007/s11837-005-0229-4 ↗
2. R.D. Price, F. Jiang, R.M. Kulin, and K.S. Vecchio: Mater. Sci. Eng., A, 2011, vol. 528, pp. 3134–46.10.1016/j.msea.2010.12.087 ↗
3. J.C. Rawers and D.E. Alman: Compos. Sci. Technol., 1995, vol. 54, pp. 379–84.10.1016/0266-3538(95)00072-0 ↗
4. R.R. Adharapurapu, K.S. Vecchio, F. Jiang, and A. Rohatgi: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1595–1608.10.1007/s11661-005-0251-8 ↗
5. D.J. Harach and K.S. Vecchio: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1493–1505.10.1007/s11661-001-0237-0 ↗
6. A. Rohatgi, D.J. Harach, K.S. Vecchio, and K.P. Harvey: Acta Mater., 2003, vol. 51, pp. 2933–57.10.1016/S1359-6454(03)00108-3 ↗
7. L.M. Peng, J.H. Wang, H. Li, J.H. Zhao, and L.H. He: Scripta Mater., 2005, vol. 52, pp. 243–48.10.1016/j.scriptamat.2004.09.010 ↗
8. L.M. Peng, H. Li, and J.H. Wang: Mater. Sci. Eng., A, 2005, vol. 406, pp. 309–318.10.1016/j.msea.2005.06.067 ↗
9. J.G. Luo and V.L. Acoff: Mater. Sci. Eng., A, 2004, vol. 379, pp. 164–172.10.1016/j.msea.2004.01.021 ↗
10. F. Kong, Y. Chen, and D. Zhang: Mater. Des., 2011, vol. 32, pp. 3167–72.10.1016/j.matdes.2011.02.052 ↗
11. J. Oh, S.G. Pyo, S. Lee, and N.J. Kim: J. Mater. Sci., 2003, vol. 38, pp. 3647–51.10.1023/A:1025637600400 ↗
12. I.A. Bataev, A.A. Bataev, V.I. Mali, and D.V. Pavliukova: Mater. Des., 2012, vol. 35, pp. 225–34.10.1016/j.matdes.2011.09.030 ↗
13. V.I. Mali, D.V. Pavliukova, I.A. Bataev, A.A. Bataev, A.I. Smirnov, P.S. Yartsev, and V.V. Bazarkina: Adv. Mater. Res., 2011, vol. 311–313, pp. 236–39.10.4028/www.scientific.net/AMR.311-313.236 ↗
14. I.A. Bataev, A.A. Bataev, V.I. Mali, D.V. Pavlyukova, P.S. Yartsev, and E.D. Golovin: Phys. Met. Metallogr., 2012, vol. 113, pp. 947–56.10.1134/S0031918X12070022 ↗
15. T. Li, F. Grignon, D.J. Benson, K.S. Vecchio, E.A. Olevsky, F. Jiang, A. Rohatgi, R.B. Schwarz, and M.A. Meyers: Mater. Sci. Eng., A, 2004, vol. 374, pp. 10–26.10.1016/j.msea.2003.09.074 ↗
16. D.E. Alman, C.P. Doğn, J.A. Hawk, and J.C. Rawers: Mater. Sci. Eng., A, 1995, vol. 192–193, pp. 624–32.10.1016/0921-5093(94)03300-5 ↗
17. D.E. Alman, J.C. Rawers, and J.A. Hawk: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 589–99.10.1007/BF02663908 ↗
18. J.C. Rawers, J.S. Hansen, D.E. Alman, and J.A. Hawk: J. Mater. Sci. Lett., 1994, vol. 13, pp. 1357–60.10.1007/BF00624495 ↗
19. Y. Sun, S.K. Vajpai, K. Ameyama, and C. Ma: J. Alloys Compd., 2014, vol. 585, pp. 734–40.10.1016/j.jallcom.2013.09.215 ↗
20. K. Mizuuchi, K. Inoue, M. Sugioka, M. Itami, and M. Kawahara: Mater. Trans., 2004, vol. 45, pp. 249–56.10.2320/matertrans.45.249 ↗
21. H.O. Baker and O. Hiroaki: Alloy Phase Diagrams, ASM International, Materials Park, 1992.
22. F. Zhang, L. Lu, M.O. Lai, and F.H.S. Froes: J. Mater. Sci., 2003, vol. 38, pp. 613–19.10.1023/A:1021870530302 ↗
23. G. Sauthoff: Intermetallics, VCH Publishers, Weinheim, 1995.10.1002/9783527615414 ↗
24. J.C. Schuster and H. Ipser: Zeitschrift fuer Metallkunde/Materials Research and Advanced Techniques, 1990, vol. 81, pp. 389–96.
25. J.C. Rawers, W.R. Wrzesinski: J. Mater. Sci., 1992, vol. 27, pp. 2877–86.10.1007/BF01154095 ↗
26. U.R. Kattner, J.C. Lin, and Y.A. Chang: Metall. Trans. A, 1992, vol. 23A, pp. 2081–90.10.1007/BF02646001 ↗
27. C.M. Wayman and H.K.D.H. Bhadeshia: in Physical Metallurgy (Chap. 16), 4th ed., R.W.C. Haasen, ed., North-Holland, Oxford, 1996, pp. 1507–54.10.1016/B978-044489875-3/50021-1 ↗
28. M.K. McQuillan: Metall. Rev., 1963, vol. 8, pp. 41–104.10.1179/mtlr.1963.8.1.41 ↗
29. M.J. Donachie: Titanium: A Technical Guide, 2nd ed., ASM International, Materials Park, 2000.10.31399/asm.tb.ttg2.9781627082693 ↗
30. I.I. Kornilov, E.N. Pylaeva, and M.A. Volkova: Bull. Acad. Sci. USSR Div. Chem. Sci., 1957, vol. 5, pp. 787–95.10.1007/BF01169981 ↗
31. M. Sujata, S. Bhargava, and S. Sangal: J. Mater. Sci. Lett., 1997, vol. 16, pp. 1175–78.
32. F. Zhang, S.L. Chen, Y.A. Chang, and U.R. Kattner: Intermetallics, 1997, vol. 5, pp. 471–82.10.1016/S0966-9795(97)00030-7 ↗
33. R.A.G. Bernshtein M.L.: Metallovedenie i termicheskaya obrabotka stali, Mashinostroenie, Moscow, 1983.