Cross Flow During Twist Extrusion: Theory, Experiment, and Application
Source abstract
Abstract
Upon intensive investigation during the recent years, severe plastic deformation (SPD) has been commonly accepted as a strong tool for improving mechanical properties of metallic materials. The interest in commercial use of SPD materials with superior properties addresses the issue of scaling up the SPD methods. In this regard, methods that can provide SPD conditions in billets with large dimensions become of prime interest. Twist extrusion (TE) is such a process, whereby large strains are accumulated owing to repeated extrusion through a die that imposes shearing stresses. Despite a few studies of TE in the literature, many features of the process's nature remain unclear or even unknown. In the current article, we have studied an important effect of TE named “cross flow” that previously received scarce attention. By performing both experiments and simulations, we elucidated the mechanism of the cross flow as well as how it is affected by material properties and process conditions. Since practical significance of the cross flow became apparent, special attention was paid to the problem of control and reliable prediction of the cross flow. Finally, prospective applications of the investigated effect were suggested. Conclusions of the current study are anticipated to contribute to further research on simulation of other simple-shear-based SPD processes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Powder Metallurgy Techniques and Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. R.Z. Valiev, I. Sabirov, A.P. Zhilyaev, and T.G. Langdon: JOM, 2012, vol. 64, pp. 1134–42.10.1007/s11837-012-0427-9 ↗
2. A.P. Zhilyaev and T.G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp. 893–979.10.1016/j.pmatsci.2008.03.002 ↗
3. V.M. Segal: Mater. Sci. Eng. A, 2004, vol. 386, pp. 269–76.10.1016/S0921-5093(04)00934-7 ↗
4. R.Z. Valiev and T.G. Langdon: Prog. Mater. Sci., 2006, vol. 51, pp. 881–981.10.1016/j.pmatsci.2006.02.003 ↗
5. G.A. Salishchev, O.R. Valiakhmetov, and R.M. Galeyev: J. Mater. Sci., 1993, vol. 28, pp. 2898–902.10.1007/BF00354692 ↗
6. Y. Saito, H. Utsunomiya, N. Tsuji, and T. Sakai: Acta Mater., 1999, vol. 47, pp. 579–83.10.1016/S1359-6454(98)00365-6 ↗
7. J.Y. Huang, Y.T. Zhu, H. Jiang, and T.C. Lowe: Acta Mater., 2001, vol. 49, 1497–1505.10.1016/S1359-6454(01)00069-6 ↗
8. Y. Beygelzimer, D. Orlov, and V. Varyukhin: Ultrafine Grained Materials II, The Minerals, Metals & Materials Society, Warrendale, PA, 2002, pp. 297–304.10.1002/9781118804537.ch35 ↗
9. V.M. Segal: U.S. Patent #7,096,705, 2006.10.1088/1126-6708/2006/03/096 ↗
10. S. Mizunuma: Mater. Sci. Forum, 2006, vol. 503–504, pp. 185–92.10.4028/www.scientific.net/MSF.503-504.185 ↗
11. Y. Beygelzimer: Mater. Sci. Forum, 2011, vol. 683, pp. 213–24.10.4028/www.scientific.net/MSF.683.213 ↗
12. P.W. Bridgman: Studies in Large Plastic Flow and Fracture, with Special Emphasis on the Effects of Hydrostatic Pressure, McGraw-Hill, New York, NY, 1952, 362 pp.
13. V.M. Segal: Mater. Sci. Eng. A, 2002, vol. 338, pp. 331–44.10.1016/S0921-5093(02)00066-7 ↗
14. N. Pardis and R. Ebrahimi: Mater. Sci. Eng. A, 2010, vol. 527, 6153–56.10.1016/j.msea.2010.06.028 ↗
15. Y. Beygelzimer, D. Prilepo, R. Kulagin, V. Grishaev, O. Abramova, V. Varyukhin, and M. Kulakov: J. Mater. Process. Technol., 2011, vol. 211, 522–29.10.1016/j.jmatprotec.2010.11.006 ↗
16. C. Wang, F. Li, Q. Li, and L. Wang: Mater. Sci. Eng. A, 2012, vol. 548, pp. 19–26.10.1016/j.msea.2012.03.055 ↗
17. U. MohammedIqbal and V.S. Senthilkumar: Int. J. Mech. Mater. Eng., 2012, vol. 548, pp. 24–30.
18. S.A.A. Akbari Mousavi and S.R. Bahadori: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1242–46.10.1016/j.msea.2010.10.007 ↗
19. S.R. Bahadori and S.A.A. Akbari Mousavi: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6527–34.10.1016/j.msea.2011.04.092 ↗
20. Y. Beygelzimer, V. Varyukhin, S. Synkov, and D. Orlov: Mater. Sci. Eng. A, 2009, 503, pp. 14–17.10.1016/j.msea.2007.12.055 ↗
21. M. Berta, D. Orlov, and P.B. Prangnell: Int. J. Mater. Res., 2007, vol. 98, pp. 200–204.10.3139/146.101461 ↗
22. D. Orlov, Y. Beygelzimer, S. Synkov, V. Varyukhin, N. Tsuji, and Z. Horita: Mater. Trans., 2009, vol. 50, pp. 96–100.10.2320/matertrans.MD200802 ↗
23. M.I. Latypov, I.V. Alexandrov, Y. Beygelzimer, S. Lee, and H.S. Kim: Comput. Mater. Sci., 2012, vol. 60, pp. 194–200.10.1016/j.commatsci.2012.03.035 ↗
24. Y. Beygelzimer, R.Z. Valiev, and V. Varyukhin: Mater. Sci. Forum, 2010, vol. 667–669, pp. 97–102.10.4028/www.scientific.net/MSF.667-669.97 ↗
25. R. Hill: The Mathematical Theory of Plasticity, Oxford University Press, New York, NY, 1950, 355 pp.
26. Y. Beygelzimer, A. Reshetov, O. Prokof’eva, and R. Kulagin: J. Mater. Process. Technol., 2009, vol. 209, pp. 3650-56.10.1016/j.jmatprotec.2008.08.022 ↗
27. R.H. Wagoner and J.L. Chenot: Fundamentals of Metal Forming, Wiley, New York, 1996, 389 pp.
28. E.R. Braithwaite: Solid Lubricants and Surfaces, Pergamon Press, New York, 1964, 286 pp.10.1016/B978-0-08-010018-0.50003-6 ↗
29. L.M. Kachanov: Foundations of the Theory of Plasticity, North-Holland Publishing Company, Amsterdam, 1971, 496 pp.
30. S.S. Hecker, M.G. Stout, and D.T. Eash: Plasticity of Metals at Finite Strain: Theory, Experiment, and Computation, Stanford University, Los Angeles, CA, 1981, pp. 162–205.
31. J.J. Jonas, G.R. Canova, S.C. Shrivastava, and N. Christodoulou: Plasticity of Metals at Finite Strain: Theory, Experiment, and Computation, Stanford University, Los Angeles, CA, 1981, pp. 206–29.
32. P. Sharma: Int. J. Solids Struct., 2004, vol. 41, pp. 6317–33.10.1016/j.ijsolstr.2004.05.004 ↗
33. Y. Beygelzimer and V. Beloshenko: Encyclopedia of polymer science and technology, Wiley, Hoboken, 2004, pp. 850–65.
34. J.M. Ottino: The Kinematics of Mixing: Stretching, Chaos and Transport, Cambridge University Press, Cambridge, 1989, 396 pp.
35. P.R. Soni: Mechanical Alloying: Fundamentals and Applications, Cambridge International Science Publishing, Cambridge, 2001, 147 pp.