Erosion-oxidation interaction in Ni and Ni-20Cr alloy
Source abstract
Abstract
The solid-particle erosion of metals and alloys at elevated temperatures is characterized by different mechanisms of material removal, depending on the temperature of exposure, impact velocity, impact angle, and flux rate of the eroding particles. The objective of this article is to delineate the prevalent erosion mechanisms in nickel and a nickel-20 chromium alloy over a large range of temperatures, impact velocities, impact angles, and particle feed rates. For this purpose, a specialized elevated-temperature erosion rig has been utilized. Nickel and a Ni-20Cr alloy have been chosen as the test materials, in view of their substantially different oxidation behaviors. Results from the present study indicate that while the erosion rate generally increases with increasing temperature, an increased particle feed rate causes a reduction in the erosion rate, especially at higher temperatures beyond 650 K. On the basis of a detailed examination of the morphology of the eroded surfaces and the subsurface features beneath the eroded surfaces, four different material removal mechanisms have been identified in the nickel, while only three material removal mechanisms were operative in the Ni-20Cr alloy. Utilizing the aforementioned information, erosion-oxidation (E-O) interaction mechanism maps (herein, termed E-O maps) delineating the regions of dominance of the various erosion mechanisms in an impact velocity-test temperature space have been constructed for Ni and a Ni-20Cr alloy. Finally, the differences in erosion behavior between the Ni and Ni-20Cr alloy have been identified and rationalized.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Erosion and Abrasive Machining · Particle Dynamics in Fluid Flows · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. I.G. Wright: Mater. Sci. Eng., 1987, vol. 88, pp. 261–71.10.1016/0025-5416(87)90094-2 ↗
2. S.J. Dipkumar: Proc. 5th Int. Conf. on Erosion by Liquid and Solid Impact, J.E. Field, ed., Cavendish Laboratory, Cambridge University, Cambridge, United Kingdom, Sept. 1979, Cambridge University Press, Cambridge, UK, 1979, pp. 1–14.
3. J. Stringer: Wear, 1995, vols. 186–87, pp. 11–27.10.1016/0043-1648(95)07189-X ↗
4. W. Tabakoff and A. Hamed: Proc. 6th Int. Conf. on Liquid and Solid Impact, J.S. Field and N.S. Corney, eds., Cavindish Laboratory, Cambridge University, Cambridge, United Kingdom, 1983, Cambridge University Press, Cambridge, UK, 1983, pp. 1–9.
5. A.V. Levy, J. Yan, and J. Patterson: Proc. Int. Conf. on Wear of Materials, K.C. Ludema, ed., ASME, New York, NY, 1985, pp. 708–16.
6. N. Gat and W. Tabakoff: Wear, 1978, vol. 50, pp. 85–94.10.1016/0043-1648(78)90247-8 ↗
7. A.V. Levy and Y.F. Man: Wear, 1986, vol. 111, pp. 173–86.10.1016/0043-1648(86)90218-8 ↗
8. A.V. Levy and Y.F. Man: Wear, 1989, vol. 131, pp. 53–69.10.1016/0043-1648(89)90245-7 ↗
9. P.J. Shayler and K.H. Yee: Wear, 1985, vol. 98, pp. 127–40.10.1016/0043-1648(84)90222-9 ↗
10. I. Finnie, A.V. Levy, and D.H. McFadden: ASTM STP 664, W.F. Adler, ed., ASTM, Philadelphia, PA, 1976, pp. 36–57.
11. C.T. Kang, F.S. Pettit, and N. Birks: Metall. Trans. A, 1987, vol. 18A, pp. 1785–1803.10.1007/BF02646210 ↗
12. W. Tabakoff and B.V.R. Vittal: Wear, 1983, vol. 86, pp. 89–99.10.1016/0043-1648(83)90091-1 ↗
13. J. Zhou and S. Bahadur: Corrosion and Particle Erosion at High Temperature, V. Srinivasan and K. Vedula, eds., TMS, Warrendale, PA, 1989, pp. 315–31.
14. Trilok Singh: Ph.D. Thesis, Banaras Hindu University, Varanasi, India, 1992.
15. A.V. Levy: Corrosion and Particle Erosion at High Temperature, V. Srinivasan and K. Vedula, eds., TMS, Warrendale, PA, 1989, pp. 207–29.
16. S.L. Chang, F.S. Pettit, and N. Birks: Oxid. Met., 1990, vol. 34 (1–2), pp. 47–69.10.1007/BF00664339 ↗
17. A.V. Levy, B.W. Wang, Y.F. Man, and N. Zee: Wear, 1989, vol. 131, pp. 85–103.10.1016/0043-1648(89)90247-0 ↗
18. A.V. Levy and B.Q. Wang: Wear, 1989, vol. 131, pp. 71–84.10.1016/0043-1648(89)90246-9 ↗
19. J. Zhou and S. Bahadur: Proc. Corrosion-Erosion Wear of Materials at Elevated Temperature, Berkeley, CA, A.V. Levy, ed., 1991, NACE, Houston, TX, 1991, pp. 1–32.
20. Y. Shida and H. Fujikawa: Wear, 1985, vol. 103, pp. 281–96.10.1016/0043-1648(85)90026-2 ↗
21. Trilok Singh and G. Sundararajan: Metall. Trans. A, 1990, vol. 21A, pp. 3187–99.10.1007/BF02647314 ↗
22. R.H. Barklow, J.A. Geobel, and F.S. Pettit: Erosion: Prevention and Useful Application, ASTM STP 664, W. Adler, ed., ASTM, Philadelphia, PA, 1979, p. 163.10.1520/STP35801S ↗
23. A.V. Levy, E. Slamovich, and N. Zee: Wear, 1986, vol. 110, pp. 117–49.10.1016/0043-1648(86)90142-0 ↗
24. A.V. Levy and Y.F. Man: Wear, 1989, vol. 131, pp. 39–51.10.1016/0043-1648(89)90244-5 ↗
25. S.L. Chang, F.S. Pettit, and N. Birks: Oxid. Met., 1990, vol. 34 (1–2), pp. 71–100.10.1007/BF00664340 ↗
26. A.V. Levy and B. Wang: Surf. Coating Technol., 1987, vol. 33, pp. 285–95.10.1016/0257-8972(87)90195-2 ↗
27. Q. Geng, B. Wang, P. Hou, and A.V. Levy: Wear, 1991, vol. 150, pp. 89–105.10.1016/0043-1648(91)90310-Q ↗
28. I.G. Wright, V. Nagarjun, and J. Stringer: Oxid. Met., 1986, vol. 25, pp. 175–99.10.1007/BF00655896 ↗
29. V.K. Sethi and I.G. Wright: in Corrosion and Particle Erosion at High Temperature, V. Srinivasan and K. Vedula, eds., TMS, Warrendale, PA, 1989, pp. 245–63.
30. I.G. Wright, V.K. Sethi, and A.J. Markowrth: Wear, 1995, vols. 186–187, pp. 230–37.10.1016/0043-1648(95)07129-6 ↗
31. F.H. Statt, M.P. Jordan, S. Lekatos, M.M. Stack, and G.C. Wood: Wear, 1995, vols. 186–187, pp. 291–98.10.1016/0043-1648(95)07149-0 ↗
32. S. Chinnadurai and S. Bahadur: Wear, 1995, vols. 186–187, pp. 299–305.10.1016/0043-1648(95)07160-1 ↗
33. J. Zhou and S. Bahadur: Wear, 1995, vols. 186–187, pp. 332–39.10.1016/0043-1648(95)07161-X ↗
34. J. Xie and P.M. Walsh: Wear, 1995, vols. 186–187, pp. 256–65.10.1016/0043-1648(95)07168-7 ↗
35. A. Drotlew, P. Christodonlou, and V. Gutowski: Wear, 1997, vol. 211, pp. 120–28.10.1016/S0043-1648(97)00132-4 ↗
36. S. Hogmark, A. Hammersten, and S. Soderberg: Proc. 6th Int. Conf. on Erosion by Liquid and Solid Impact, J.E. Field and N.S. Corney, eds. Cavendish Laboratory, Cambridge University, Cambridge, United Kingdom, Sept. 1983, Cambridge University Press, Cambridge, UK, 1983, pp. 1–8.
37. K. Natesan and Y.Y. Liu: Mater. Sci. Eng., 1989, vol. A121, pp. 571–80.10.1016/0921-5093(89)90817-4 ↗
38. M.M. Stack, F.H. Stoh, and G.C. Wood: Wear, 1993, vols. 162–164, pp. 706–12.10.1016/0043-1648(93)90070-3 ↗
39. M. Rishel, F.S. Pettit, and N. Birks: Mater. Sci. Eng., 1991, vol. A143, pp. 197–211.10.1016/0921-5093(91)90739-A ↗
40. G. Sundararajan: Wear, 1991, vol. 145, pp. 251–82.10.1016/0043-1648(91)90135-H ↗
41. Manish Roy and G. Sundararajan: DMRL Technical Report No. DMR-TR-96206, DMRL, Hyderabad, 1996.
42. Manish Roy and G. Sundararajan: DMRL Technical Report No. DMR-TR-98241, DMRL, Hyderabad, 1996.
43. S. Soderberg, S. Hogmark, U. Engman, and H. Swahn: Tribol. Int., 1981, vol. 14, pp. 333–43.10.1016/0301-679X(81)90101-8 ↗
44. S.C. Lim and M.F. Ashby: Acta Metall., 1987, vol. 35, pp. 1–24.10.1016/0001-6160(87)90209-4 ↗
45. T.F.J. Quinn, J.L. Sullivan, and D.M. Rowson: Proc. Int. Conf. on Wear of Material, Dearborn, MI, ASME, Fairfield, NJ, 1979, pp. 1–11.
46. T.F.J. Quinn, J.L. Sullivan, and D.M. Rowson: Wear, 1984, vol. 94, pp. 175–91.10.1016/0043-1648(84)90053-X ↗
47. Manish Roy: Ph.D. Thesis, Indian Institute of Technology, Kharagpur, India, 1999.
48. Manish Roy, K.K. Ray, and G. Sundararajan: Oxid. Met., 1999, vol. 51, pp. 251–72.10.1023/A:1018870606617 ↗
49. Manish Roy, K.K. Ray, and G. Sundararajan: Wear, 1998, vol. 217, pp. 312–20.10.1016/S0043-1648(98)00139-2 ↗
50. G. Sundararajan: Wear, 1991, vol. 149, pp. 129–53.10.1016/0043-1648(91)90369-6 ↗
51. A.M. Ahleris: Metall. Trans., 1970, vol. 1, pp. 2415–27.10.1007/BF03038369 ↗
52. Y. Bergstrom and H. Hallen: Mater. Sci. Eng., 1982, vol. 55, pp. 49–61.10.1016/0025-5416(82)90083-0 ↗
53. W. Roberts and Y. Bergstrom: Acta Metall., 1973, vol. 21, pp. 457–69.10.1016/0001-6160(73)90203-4 ↗