journal article·2011-11

Kinetics of Initial Coarsening During Sintering of Nanosized Powders

Hongtao Wang, Z. Zak Fang, Kyu Sup Hwang

Publisher page

Abstract

Grain growth during sintering is a critical issue for the manufacture of nanocrystalline bulk materials from nanosized powders. The grain growth process during sintering can be viewed as consisting of two parts: initial coarsening during early and intermediate stages of sintering and latter stage grain growth during the final stage of sintering. The latter stage grain growth is the normal grain growth that has been well studied and reported in the literature. The initial coarsening, which often inevitably causes a material to lose nanoscaled grain size characteristics, however, is not well studied at all. In this investigation, the initial coarsening during sintering of nanosized powders was studied by both nonisothermal and isothermal experimental techniques using tungsten as an example material. The results show that the initial coarsening during the heat-up process of a sintering cycle is sufficient to increase the grain size beyond the nanoscale. The kinetics of initial coarsening is found to be linear rather than polynomial, as predicted by the conventional power law of grain growth. The analysis of activation energies showed that surface diffusion is the primary mechanism for interparticle mass transport during the initial coarsening. The linear kinetic behavior could be attributed to the pinning of grain boundaries by surface grooves and high concentration of defects as the result of the synthesis of nanosized powders.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Injection Molding Process and Properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. T.R. Malow and C.C. Koch: Acta Mater., 1997, vol. 45, pp. 2177–86.10.1016/S1359-6454(96)00300-X ↗
2. Z. Fang, P. Maheshwari, X. Wang, H.Y. Sohn, A. Griffo, and R. Riley: Int. J. Refract. Met. Hard Mater., 2005, vol. 23, pp. 249–57.10.1016/j.ijrmhm.2005.04.014 ↗
3. Z.J. Shen, H. Peng, J. Liu, and M. Nygren: J. Eur. Ceram. Soc., 2004, vol. 24, pp. 3447–52.10.1016/j.jeurceramsoc.2003.10.033 ↗
4. S. Okuda, M. Kobiyama, T. Inami, and S. Takamura: Scripta Mater., 2001, vol. 44, pp. 2009–12.10.1016/S1359-6462(01)00825-9 ↗
5. D.J. Chen and M.J. Mayo: Nanostruct. Mater., 1993, vol. 2, pp. 469–78.10.1016/0965-9773(93)90164-7 ↗
6. W. Dickenscheid, R. Birringer, H. Gleiter, O. Kanert, B. Michel, and B. Guenther: Solid State Commun., 1991, vol. 79, pp. 683–86.10.1016/0038-1098(91)90613-Z ↗
7. G. Hibbard, K.T. Aust, G. Palumbo, and U. Erb: Scripta Mater., 2001, vol. 44, pp. 513–18.10.1016/S1359-6462(00)00628-X ↗
8. R. Klemm, E . Thiele, C. Holste, J. Eckert, and N. Schell: Scripta Mater., 2002, vol. 46, pp. 685–90.10.1016/S1359-6462(02)00054-4 ↗
9. F. Zhou, J. Lee, and E.J. Lavernia: Scripta Mater., 2001, vol. 44, pp. 2013–17.10.1016/S1359-6462(01)00826-0 ↗
10. Z.Z. Fang and H. Wang: Int. Mater. Rev., 2008, vol. 53, pp. 326–52.10.1179/174328008X353538 ↗
11. D.M. Owen and A.H. Chokshi: Nanostruct. Mater., 1993, vol. 2, pp. 181–87.10.1016/0965-9773(93)90024-6 ↗
12. R.S. Averback: Z. Phys. D Atom Mol. Cl., 1993, vol. 26, pp. 84–88.10.1007/BF01429112 ↗
13. J.G. Li and Y.P. Ye: J. Am. Ceram. Soc., 2006, vol. 89, pp. 139–43.10.1111/j.1551-2916.2005.00654.x ↗
14. R. Vassen: CFI-Ceram. Forum Int., 1999, vol. 76, pp. 19–22.
15. I.W. Chen and X.H. Wang: Nature, 2000, vol. 404, pp. 168–71.10.1038/35004548 ↗
16. M.N. Rahaman: Sintering of Ceramics, CRC Press, New York, NY, 2007, pp. 152–56.10.1201/b15869 ↗
17. C. Greskovich and K.W. Lay: J. Am. Ceram. Soc., 1972, vol. 55, pp. 142–46.10.1111/j.1151-2916.1972.tb11238.x ↗
18. F.F. Lange and B.J. Kellett: J. Am. Ceram. Soc., 1989, vol. 72, pp. 735–41.10.1111/j.1151-2916.1989.tb06209.x ↗
19. F. Wakai, M. Yoshida, Y. Shinoda, and T. Akatsu: Acta Mater., 2005, vol. 53, pp. 1361–71.10.1016/j.actamat.2004.11.029 ↗
20. H.N. Ch’ng and J. Pan: Acta Mater., 2007, vol. 55, pp. 813–24.10.1016/j.actamat.2006.07.015 ↗
21. J.L. Shi and T.S. Yen: J. Eur. Ceram. Soc., 1994, vol. 14, pp. 505–10.10.1016/0955-2219(94)90120-1 ↗
22. J. Cai and R. Liu: J. Therm. Anal. Calorim., 2008, vol. 94, pp. 313–16.10.1007/s10973-007-8499-4 ↗
23. J. Farjas and P. Roura: AIChE J., 2008, vol. 54, pp. 2145–54.10.1002/aic.11540 ↗
24. J.H. Flynn: Thermochim. Acta, 1997, vol. 300, pp. 83–92.10.1016/S0040-6031(97)00046-4 ↗
25. J. Cai, F. Yao, W. Yi, and F. He: AIChE J., 2006, vol. 52, pp. 1554–57.10.1002/aic.10732 ↗
26. C. Popescu and E. Segal: Int. J. Chem. Kinet., 1998, vol. 30, pp. 313–27.10.1002/(SICI)1097-4601(1998)30:5<313::AID-KIN1>3.0.CO;2-V ↗
27. J.J.M. Orfao: AIChE J., 2007, vol. 53, pp. 2905–15.10.1002/aic.11296 ↗
28. E.J. Mittemeijer: J. Mater. Sci., 1992, vol. 27, pp. 3977–87.10.1007/BF01105093 ↗
29. L.C. Chen: Int. J. Refract. Met. Hard Mater., 1993, vol. 12, pp. 41–51.10.1016/0263-4368(93)90074-P ↗
30. R.J. Brook: in Treatise on Materials Science and Technology 9, F.F.Y. Wang, ed., Academic Press, New York, NY, 1976, pp. 331–64.10.1016/B978-0-12-341809-8.50024-3 ↗
31. Y. Estrin, G. Gottstein, E. Rabkin, and L.S. Shvindlerman: Scripta Mater., 2000, vol. 43, pp. 141–47.10.1016/S1359-6462(00)00383-3 ↗
32. Y. Estrin, G. Gottstein, and L.S. Shvindlerman: Scripta Mater., 1999, vol. 41, pp. 385–90.10.1016/S1359-6462(99)00167-0 ↗
33. Y. Estrin, G. Gottstein, and L.S. Shvindlerman: Acta Mater., 1999, vol. 47, pp. 3541–49.10.1016/S1359-6454(99)00235-9 ↗
34. C.E. Krill III, L. Helfen, D. Michels, H. Natter, A. Fitch, O. Masson, and R. Birringer: Phys. Rev. Lett., 2001, vol. 86, pp. 842–45.10.1103/PhysRevLett.86.842 ↗
35. G. Gottstein, Y. Ma, and L.S. Shvindlerman: Acta Mater., 2005, vol. 53, pp. 1535–44.10.1016/j.actamat.2004.12.006 ↗
36. G. Gottstein and L.S. Shvindlerman: Scripta Mater., 2006, vol. 54, pp. 1065–70.10.1016/j.scriptamat.2005.11.057 ↗
37. L. Zhou, H. Zhang, and D.J. Srolovitz: Acta Mater., 2005, vol. 53, pp. 5273–79.10.1016/j.actamat.2005.07.032 ↗
38. D. Farkas, S. Mohanty, and J. Monk: Phys. Rev. Lett., 2007, vol. 98, p. 165502.10.1103/PhysRevLett.98.165502 ↗
39. L. Klinger, E. Rabkin, L.S. Shvindlerman, and G. Gottstein: J. Mater. Sci., 2008, vol. 43, pp. 5068–75.10.1007/s10853-008-2678-y ↗