The Role of Dislocation Climb across Particles at Creep Conditions in 9 to 12 Pct Cr Steels
Source abstract
Abstract
The influence of a distribution of particles on creep strength is analyzed. The time it takes for dislocations to climb across the particles is the basis for a model that can describe the effect of particle size distribution, particle area fraction, stress, and temperature on the creep rate. The degradation of microstructure through coarsening is taken into account. The particle size distributions for M23C6 carbides and MX carbonitrides in a 9 pct Cr steel are accurately represented by an exponential function. Coarsening coefficients and phase fractions for MX and M23C6 particles are predicted using thermodynamic modeling, and show good fit to experimental data. The size distributions are used to determine the amount of dislocations, which can either climb across particles or make Orowan loops. The dislocation climb model is integrated into a creep rate prediction model and is used to reproduce experimental creep data for P92 steel.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. J. Hald: Creep and Fracture in High Temperature Components—Design and Life Assessment Issues, DEStech Publications Inc., Lancaster, PA, 2005, pp. 20–30
2. L.M. Brown, R.K. Ham: Strengthening Methods in Crystals, Elsevier, Amsterdam, The Netherlands, 1971
3. R.W.S. Shewfelt, L.M. Brown: Philos. Mag., 1977, vol. 4, pp. 945–6210.1080/14786437708232636 ↗
4. R. Lagneborg: Scripta Metall. Mater., 1973, vol. 7, pp. 605–1310.1016/0036-9748(73)90222-6 ↗
5. D.J. Srolowitz, M.J. Luton, R. Petkovic-Luton, D.M. Barnett, E.D. Nix: Acta Metall., 1984, vol. 32, pp. 1079–8810.1016/0001-6160(84)90011-7 ↗
6. E. Arzt, J.H. Schröder: Scripta Metall., 1985, vol. 19, pp. 1129–3410.1016/0036-9748(85)90022-5 ↗
7. W. Blum, B. Reppich: Creep Behaviour of Crystalline Solids, Pineridge Press, Swansea, United Kingdom, 1985, pp. 83–135
8. J. Eliasson, Å. Gustafson, R. Sandström: Key Eng. Mater., 2000, vols. 171–174, pp. 277–8410.4028/www.scientific.net/KEM.171-174.277 ↗
9. P. Polcik: Ph.D. Thesis, Universität Erlangen-Nürnberg, Erlangen, Germany, 1998
10. S. Straub, T. Hennige, P. Polcik, W. Blum: Steel Res., 1995, vol. 66, pp. 394–40110.1002/srin.199501144 ↗
11. L. Korcakova: Ph.D. Thesis, Technical University of Denmark, Lyngby, 2002
12. P.J. Ennis, A. Zielinska-Lipiecz, O. Wachter, A. Czyrska-Filemonowicz: Acta Mater., 1997, vol. 45, pp. 4901–0710.1016/S1359-6454(97)00176-6 ↗
13. J. Ågren, M.T. Clavaguera-Mora, J. Golcheski, G. Inden, H. Kumar, C. Sigli: CALPHAD, 2000, vol. 24, pp. 41–5410.1016/S0364-5916(00)00014-6 ↗
14. R. Sandström: unpublished research, KTH, Stockholm, Sweden, 2000
15. M. Hättestrand, H.O. Andrén: Micron, 2001, vol. 32, pp. 789–9710.1016/S0968-4328(00)00086-X ↗
16. H. Magnusson and R. Sandström: unpublished research, KTH, Stockholm, Sweden, 2007
17. J.P. Hirth, J. Lothe: Theory of Dislocations, 2nd ed., Wiley, New York, NY, 1982
18. J.W. Martin: Precipitation Hardening, 2nd ed., Butterworth-Heinemann, Oxford, United Kingdom, 1998
19. K. Sawada, K. Kubo, F. Abe: Mater. Sci. Eng., 2001, vol. A319, pp. 784–8710.1016/S0921-5093(01)00973-X ↗
20. A. Gustafson, M. Hättestrand: Mater. Sci. Eng., 2002, vol. A333, pp. 279–8610.1016/S0921-5093(01)01874-3 ↗
21. T. Sailer: Ph.D. Thesis, Universität Erlangen-Nürnberg, Erlangen, Germany, 1998
22. J. Hald, L. Korcakova: ISIJ Int., 2003, vol. 43, pp. 420–2710.2355/isijinternational.43.420 ↗
23. B. Sundman, B. Jansson, J.O. Andersson: CALPHAD, 1985, vol. 9, pp. 153–9010.1016/0364-5916(85)90021-5 ↗
24. A. Borgenstam, A. Engström, L. Höglund, J. Ågren: J. Phase Equilib., 2000, vol. 21, pp. 269–8010.1361/105497100770340057 ↗
25. H. Nitta, T. Yamamoto, R. Kanno, K. Takasawa, T. Iida, Y. Yamazaki, S. Ogu, Y. Iijima: Acta Mater., vol. 50, pp. 4117–2510.1016/S1359-6454(02)00229-X ↗