journal article·2004-02

Advancing towards constitutive equations for the metal industry via the LEDS theory

Doris Kuhlmann-Wilsdorf

Publisher page

Abstract

A prime objective in the development of crystal dislocation theory has been, and at any rate should be, constitutive equations for practical use in the metal forming industry. Protracted controversies regarding workhardening theory have frustrated this goal for the past seven decades. The are fueled by the paradox that plastic deformation is a prime example for the second law of thermodynamics in converting mechanical work into heat with good efficiency, even while in seeming opposition to the second law it typically raises the internal energy of the deformed material. The low-energy dislocation structures (LEDS) theory resolves this difficulty by showing that, as always in inanimate nature, so also plastic deformation proceeds close to minimum free energy. Indeed recent evidence based on deformation band structures proves that plastic deformation typically proceeds very close to minimum energy among the accessible configurations. White plastic strain raises the flow stress, in ductile crystalline materials mostly through generating dislocation structures, but also through twins, kink bands, microcracks and others, Newton’s third law, i.e., force equilibrium, is always stringently obeyed. Therefore, deformation dislocation structures are in thermal equilibrium as long as the stress that generated them remains in place. Based on this concept of free energy minimization, the LEDS theory has long since explained, at least semiquantitatively, all significant aspects of metal strength and deformation, as well as the effects of heat treatments. The LEDS theory is the special case, namely, as pertaining to dislocation structures, of the more general low-energy structures (LEDS) theory that governs all types of deformation independent of the deformation mechanism, and that operates in all types of materials, including plastics.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. G.I. Talor: Proc. Ry. Soc. (London), 1934, vol. 145, pp. 362–87 and 388–404.
2. G.I. Taylor: J. Inst. Met. (London), 1938, vol. 62, pp. 307–24.
3. G. Batchelor: The Life and Legacy of G.I. Taylor, Cambridge University Press, Cambridge, UK, 1996.
4. C.F. Elam: Distortion of Metal Crystals, Oxford University Press, Oxford, UK, 1935.
5. D. Kuhlmann-Wilsdorf: Trans. TMS, AIME, 1962, vol. 224, pp. 1047–61.
6. E. Orowan: Z. Phys., 1934, vol. 89, pp. 605–13, 614–33, and 634.10.1007/BF01341478 ↗
7. R. Becker: Phys. Z, 1925, vol. 26, pp. 919–25.
8. R. Becker: Z. Phys., 1925, vol. 33, p. 185.10.1007/BF01328304 ↗
9. R. Becker: Z. Technol. Phys., 1926, vol. 7, p. 547
10. R. Becker and W. Boas: Metallwirtschaft, 1929, vol. 8, pp. 317–21.
11. R. Becker and E. Orowan: Z. Phys., 1932, vol. 79, pp. 566–72.10.1007/BF01330508 ↗
12. G. Masing and M. Polanyi: Ergebn. Exact. Naturwissenschaften, 1923, vol. 2, p. 177.10.1007/978-3-642-94261-7_10 ↗
13. M. Polanyi: Z. Krista., 1925, vol. 61, p. 49.
14. A. Kochendoerfer: Plastic Properties of Metals and Crystalline Materials, Springer, Berlin, 1941.
15. U. Dehlinger: Ann. Phys., 1929, vol. 2, p. 749.10.1002/andp.19293940702 ↗
16. D. Kuhlmann and G. Masing: Z. Metallk., 1948, vol. 39, pp. 361–75.
17. D. Kuhlmann: Z. Phys., 1947, vol. 124, pp. 468–81.10.1007/BF01668885 ↗
18. J.W. Cahn and F.R.N. Nabarro: Phil. Mag., 2001, vol. 81, pp. 1409–26.10.1080/01418610108214448 ↗
19. P. Haasen and G. Leibfried: Z. Metallk., 1952, vol. 43, pp. 317–21.
20. D. Kuhlmann-Wilsdorf: Metall. Trans., 1985, vol. 16A, pp. 2091–108.10.1007/BF02670414 ↗
21. D. Kuhlmann-Wilsdorf: Z. Metallk., 1962, vol. 53, pp. 324–25.
22. D. Kuhlmann-Wilsdorf: Proc. Int. Conf. Crystal Lattice Defects, 1962; Conf. J. Phys. Soc. J., 1963, vol. 18, Suppl. I, pp. 68–73.
23. D. Kuhlmann-Wilsdorf, H.J. Levinstein, W.H. Robinson, and H.G.F. Wilsdorf: J. Aust. Inst. Met., 1963, vol. 8, pp. 102–14.
24. D. Kuhlmann-Wilsdorf: in Workhardening, J.P. Hirth and J. Weertman, eds., Gordon and Breach, New York, NY, 1966, pp. 97–132.
25. D. Kuhlmann-Wilsdorf: Metall. Trans., 1970, vol. 1, pp. 3173–79.10.1007/BF03038434 ↗
26. D. Kuhlmann-Wilsdorf: in Work Hardening in Tension and Fatigue, A.W. Thompson, ed., AIME, New York, NY, 1977, pp. 1–43.
27. D. Kuhlmann-Wilsdorf and N. Comins: Mater. Sci. Eng., 1982, vol. 60, pp. 7–24.10.1016/0025-5416(83)90073-3 ↗
28. D. Kuhlmann-Wilsdorf: Phys. Status Solidi, 1987, vol. (a)104, pp. 121–44.10.1002/pssa.2211040109 ↗
29. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng., 1989, vol. A113, pp. 1–41.10.1016/0921-5093(89)90290-6 ↗
30. D. Kuhlmann-Wilsdorf: Acta. Metall., 1989, vol. 37, pp. 3217–23.10.1016/0001-6160(89)90193-4 ↗
31. D. Kuhlmann-Wilsdorf and H.G.F. Wilsdorf: Phys. Status Solidi, 1992, vol. (b)172, pp. 235–48.10.1002/pssb.2221720122 ↗
32. D. Kuhlmann-Wilsdorf: Phys. Status Solidi, 1995, vol. (a)149, pp. 131–53.10.1002/pssa.2211490110 ↗
33. D. Kuhlmann-Wilsdorf: Phys. Status Solidi, 1995, vol. (a)149, pp. 225–41.10.1002/pssa.2211490116 ↗
34. D. Kuhlmann-Wilsdorf: Mater. Res. Innov., 1998, vol. 1, pp. 265–97.10.1007/s100190050051 ↗
35. D. Kuhlmann-Wilsdorf: Phil. Mag., 1999, vol. A79, pp. 955–1008.10.1080/01418619908210342 ↗
36. D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1999, vol. 47, pp. 1697–712.10.1016/S1359-6454(98)00413-3 ↗
37. D. Kuhlmann-Wilsdorf: Metall. Mater. Trans., A 1999, vol. A30, pp. 2391–401.10.1007/s11661-999-0247-x ↗
38. D. Kuhlmann-Wilsdorf: in ‘Dislocations in Solids’, (Eds. F.R.N. Nabarro and M.S. Duesbery, Elsevier Science, B.V., 2002) vol. 11, Chapter 59, pp. 211–342.10.1016/S1572-4859(02)80010-9 ↗
39. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng., 2001, vol. A315, pp. 211–16. (Note: Claiming that the present article was “too political,” the organizers of the International Conference Dislocations 2000, at NIST, Gaithersburg, MD, June 17–22, 2000, rejected it from inclusion in the Conference Proceedings, published in Mater. Sci. Eng. A. However, as submitted personally to the same journal, the article was accepted without change and received highly favorable reviewer comment.)10.1016/S0921-5093(01)01204-7 ↗
40. D. Kuhlmann-Wilsdorf, Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2519–2539.10.1007/s11661-002-0373-1 ↗
41. Proc. Int. Conf. on Low-Energy Dislocation Structures, University of Virginia, Charlottesville, VA, Aug. 10-14, 1986, M.N. Bassim, W.A. Jesser, D. Kuhlmann-Wilsdorf, and H.G.F. Wilsdorf, N. Elsevier Sequoia, Lausanne, 1986
42. also Mater. Sci. Eng., 1986, vol. 1, pp. 1-574, eds. 1987. vol. 86, pp. 19-92.
43. Proc. Int Conf. Low-Energy Disclocation Structures, University of Virginia, Charlottesville, VA, Aug. 14–17, 1989, M.N. Bassim, W.A. Jesser, D. Kuhlmann-Wilsdorf, and G.J. Shiflet, eds., Elsevier Sequoia, Lausanne, 1989 also Mater. Sci. Eng., 1989, vol. A113, pp. 1–454.
44. Proc. Int. Conf. on Low-Energy Dislocation Structures IV, Univ. of Manitoba, Winnipeg, MB, Canada, June 5-8, M. N. Bassim, W.A. Jesser, and D. Kuhlmann-Wilsdorf, eds., Akademie Verlag, Berlin, 1995
45. also Phys. Status Solidi, 1995, vol. (a) 149 (1), pp. 1-443.
46. F.R.N. Nabarro, Z.S. Basinski, and D.B. Holt: Adv. Phys., 1964, vol. 13, p. 193.10.1080/00018736400101031 ↗
47. S.J. Basinski and Z.S. Basinski: in Dislocations in Solids, F.R.N. Nabarro, ed., North Holland Publ. Co., Amsterdam, 1979, vol. 4, p. 261.
48. R. Phillips: Crystals. Defects and Microstructures—Modeling Across Scales, Cambridge University Press, Cambridge, UK, 2001.10.1017/CBO9780511606236 ↗
49. F.R.N. Nabarro: Phil. Mag., 2000, vol. 80, pp. 759–64.10.1080/01418610008212080 ↗
50. A. Seeger: in Workhardening, J.P. Hirth and J. Weertman, eds., Gordon and Breach, New York, NY, 1966, pp. 27–60.
51. P.B. Hirsch and T.E. Mitchell: in Workhardening, J.P. Hirth and J. Weertman, eds., Gordon and Breach, New York, NY, 1966, pp. 65–91.
52. J. Friedel and G. Saada: in Workhardening, J.P. Hirth and J. Weertman, eds., Gordon and Breach, New York, NY, 1966, pp. 1–22.
53. T.E. Mitchell: in Workhardening, J.P. Hirth and J. Weertman, eds., Gordon and Breach, New York, NY, 1966, p. 61.
54. A. Seeger: Handbuch Phys., 1958, vol. VII/2.
55. D. Kuhlmann, G. Masing, and J. Raffelsieper: Z. Metallk., 1949, vol. 40, pp. 241–46.
56. D. Kuhlmann: Proc. Phys. Soc., 1951, vol. A64, pp. 140–55.10.1088/0370-1298/64/2/306 ↗
57. N.F. Mott: Phil. Mag., 1952, vol. 43, p. 1151.10.1080/14786441108521024 ↗
58. N.F. Mott: Phil. Mag., 1953, vol. 44, p. 742.10.1080/14786440708521052 ↗
59. H. Wilsdorf and D. Kuhlmann-Wilsdorf: Z. Angew. Phys., 1952, vol. 4, pp. 361–70; 409–18, and 418–24.
60. D. Kuhlmann-Wilsdorf and H. Wilsdorf: Acta Metal., 1953, vol. 1, pp. 394–413.10.1016/0001-6160(53)90122-9 ↗
61. H. Wilsdorf, D. Kuhlmann-Wilsdorf, and J.H. van der Merwe: Phil. Mag., 1952, vol. 43, pp. 632–44.10.1080/14786440608520219 ↗
62. H. Mughrabi: Phil. Mag., 1971, vol. 23, pp. 869; 97.10.1080/14786437108216994 ↗
63. H. Mughrabi: Acta Metall., 1983, vol. 31, p. 1367.10.1016/0001-6160(83)90007-X ↗
64. Dislocations in Solids, F.R.N. Nabarro, Printer: See Ref. 38.
65. E.C. Aifantis: J. Eng. Mater. Technol., 1984, vol. 106, p. 326.10.1115/1.3225725 ↗
66. E.C. Aifantis: Mater. Sci. Eng., 1986, vol. 81, p. 563.10.1016/0025-5416(86)90293-4 ↗
67. D. Walgraef and E.C. Aifantis: Int. J. Eng. Sci., 1985, vol. 23, pp. 135, 1359, and 1365.
68. L.P. Kubin: in Materials Science and Technology: A Comprehensive Treatment, R.W. Cahn, P. Haasen, and F.L. Kramer, eds. VCH, Weinheim, 1993, vol. 6, p. 138.
69. B. Devincre and L.P. Kubin: Mater. Sci. Eng. 1997, vol. A234, p. 810.1016/S0921-5093(97)00146-9 ↗
70. F.C. Frank: “Pittsburgh Symp. On the Plastic Deformation of Crystalline Solids” Rept. NAVEXOS-P-834, Off. Of Naval Res. Washington, DC, 1950, p. 150.
71. W.T. Read: Dislocations in Crystals, McGraw-Hill, Inc. New York, NY 1953, p. 181–86.
72. W. Bollmann: Crystal Defects and Crystalline Interfaces, Springer, Berlin, 1970.10.1007/978-3-642-49173-3 ↗
73. S. Amelinckx and W. Dekeyser: Solid State Phys. Adv. Res. Appl. 1959, vol. 8, pp. 325–499.
74. W.T. Read and W. Shockley: Imperfections in Nearly Perfect Crystals, John Wiley Sons, New York, NY, 1952, ch. 13.
75. J.H. van der Merwe, J. Woltersdorf, and W.A. Jesser: Mater. Sci. Eng., 1986, vol. 81, pp. 1–33.10.1016/0025-5416(86)90251-X ↗
76. G.J. Shiflet: Mater Sci. Eng., 1986, vol. 81, pp. 61–100.10.1016/0025-5416(86)90254-5 ↗
77. D.A. Smith and G. Shiflet: Mater. Sci. Eng., 1987, vol. 86, pp. 67–92.10.1016/0025-5416(87)90443-5 ↗
78. S. Solenthaler and W. Bollmann: Mater. Sci. Eng., 1986, vol. 81, pp. 35–59.10.1016/0025-5416(86)90252-1 ↗
79. C. Solenthaler: Mater. Sci. Eng., 1989, vol. A113, pp. 95–119.10.1016/0921-5093(89)90297-9 ↗
80. P. Neumann: Mater. Sci. Eng., 1986, vol. 81, pp. 465–7510.1016/0025-5416(86)90284-3 ↗
81. J.T. Moore and D. Kuhlmann-Wilsdorf: J. Appl. Phys., 1970, vol. 41, pp. 4411–17.10.1063/1.1658475 ↗
82. J.T. Moore and D. Kuhlmann-Wilsdorf: J. Appl. Phys., 1971, vol. 42, pp. 953–61.10.1063/1.1660192 ↗
83. J.T. Moore and D. Kuhlmann-Wilsdorf: J. Appl. Phys., 1971, vol. 42, pp. 3717–25.10.1063/1.1659675 ↗
84. J.T. Moore and D. Kuhlmann-Wilsdorf: J. Appl. Phys., 1971, vol. 42, pp. 3726–30.10.1063/1.1659676 ↗
85. J.T. Moore and D. Kuhlmann-Wilsdorf: Grain Boundaries and Interfaces, Proc. Int. Conf. on Structure and Properties of Grain Boundary Interfaces, Yorktown Heights, NY, USA, 1971, P. Chaudhari and J. W. Matthews, eds., North-Holland Publ. Co., 1972, pp. 456–78: also Surface Sci. (Special Issue), 1972, vol. 31, pp. 456–78.10.1016/0039-6028(72)90271-3 ↗
86. M.N. Bassim and D. Kuhlmann-Wilsdorf: Crystal Lattice Defects, 1973, vol. 4, pp. 9–27.
87. M.N. Bassim and D. Kuhlmann-Wilsdorf: Phys. Status Solidi, 1973 vol. (a)15, pp. 725–73.10.1002/pssa.2210150245 ↗
88. M.N. Bassim and D. Kuhlmann-Wilsdorf: Phys. Status Solidi (a), 1973, vol.16 pp. 241–51.10.1002/pssa.2210160126 ↗
89. M.N. Bassim and D. Kuhlmann-Wilsdorf: Phys. Status Solidi, 1973 vol. (a)17, pp. 281–92.10.1002/pssa.2210170132 ↗
90. M.N. Bassim and D. Kuhlmann-Wilsdorf: Phys. Status Solidi, 1973, vol. (a)17), pp. 379–93.10.1002/pssa.2210170202 ↗
91. M.N. Bassim and D. Kuhlmann-Wilsdorf: Phys. Status Solidi, 1973, vol. (a)19, pp. 335–46.10.1002/pssa.2210190135 ↗
92. D. Kuhlmann-Wilsdorf and C. Laird: Mater. Sci. Eng., 1979, vol. 37, pp. 11–20.10.1016/0025-5416(79)90074-0 ↗
93. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng., 1979, vol. 39, pp. 127–39.10.1016/0025-5416(79)90178-2 ↗
94. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng., 1979, vol. 39, pp. 231–45.10.1016/0025-5416(79)90062-4 ↗
95. C. Laird, P. Charsley, and H. Mughrabi: Mater. Sci. Eng., 1986, vol. 81, pp. 433–50.10.1016/0025-5416(86)90281-8 ↗
96. A.T. Winter: Phil. Mag., 1978, vol. 37, p. 457.10.1080/01418617808239182 ↗
97. C. Laird, J.M. Finney, and D. Kuhlmann-Wilsdorf: Mater. Sci. Eng., 1981, vol. 50, pp. 127–36.10.1016/0025-5416(81)90093-8 ↗
98. C. Laird, P. Charsley, and H. Mughrabi: Mater. Sci. Eng., 1986, vol. 81, pp. 433–50.10.1016/0025-5416(86)90281-8 ↗
99. Z.S. Basinski and S.J. Basinski: in Progress in Materials Science, B. Cantor and P.B. Hirsch, eds., Pergamon Press, Oxford, UK, 1992, vol. 36, pp. 89–148.
100. H.G.F. Wilsdorf: unpublished.