journal article·2013-08

Evaluation of Dissimilar Welds of 5083-H12 and 6061-T6 Produced by Friction Stir Welding

Morteza Ghaffarpour, Sina Kolahgar, Bijan Mollaei Dariani, Kamran Dehghani

Publisher page

Abstract

In the present study, the dissimilar aluminum alloys of 5083-H12 and 6061-T6 were joined by friction stir welding (FSW). Then, the design of experiments (DOE), the Box–Benken method, and the response surface methodology (RSM) were used to optimize the effective parameters of the FSW process. The optimized parameters that led to the maximum tensile strength in dissimilar friction stir welded sheets were determined. The predicted results were then compared with those measured experimentally. The results show that there is good agreement between the predicted and measured amounts. By applying the limit dome height (LDH) test, the formability of friction stir welded sheets was studied. During the LDH test, the minimum formability occurred in the heat-affected zone (HAZ) of the 6061-T6 side. The results of microhardness and tensile tests confirm the results of the LDH tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Church, P. Templesmith, and C.J. Dawes: International Patent Application No. PCT/GB92/02203 and Great Britain Patent Application No. 9125978.8, Friction stir welding, 1991.
2. T. DebRoy and H.K.D.H. Bhadeshia: Sci. Technol. Weld. Join., 2010, vol. 15, pp. 266–70.10.1179/174329310X12726496072400 ↗
3. H. Okamura and K. Aota: Join. Dissimilar Materi. Frict. Stir Weld., 2004, vol. 18, pp. 852–60.
4. S. Lim, S. Kim, C.G. Lee, and S. Kim: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2837–43.10.1007/s11661-004-0231-4 ↗
5. M. Peel, A. Steuwer, P. Withers, T. Dickerson, Q. Shi, and H. Shercliff: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2183–93.10.1007/BF02586138 ↗
6. D. Kim, W. Lee, J. Kim, C. Kim, and K. Chung: Int. J. Mech. Sci., 2010, vol. 52, pp. 612–25.10.1016/j.ijmecsci.2010.01.001 ↗
7. W. Lee, K.H. Chung, D. Kim, J. Kim, C. Kim, and K. Okamoto: Int. J. Plast., 2009, vol. 25, pp. 1626–54.10.1016/j.ijplas.2008.08.005 ↗
8. C. Leitao, B. Emilio, B.M. Chaparro, and D.M. Rodrigues: Mater. Des., 2009, vol. 30, pp. 3235–42.10.1016/j.matdes.2008.12.005 ↗
9. Y.K. Yousif, K.M. Daws, and B.I. Kazem: Jordan J. Mech. Ind. Eng., 2008, vol. 2, pp. 151–55.
10. M. Nourani, A.S. Milni, and S. Yannacopoulos: A Rev. Case Study Eng., 2011, vol. 3, pp. 144–55.
11. M. Indira Rani, R.N. Marpu, and A.C.S. Kumar: J. Eng. Appl. Sci., 2011, vol. 6, pp. 871–80.
12. M. Ghosh, K. Kumar, S.V. Kailas, and A.K. Ray: Mater. Amp Des., 2010, vol. 31, pp. 3033–37.10.1016/j.matdes.2010.01.028 ↗
13. D.C. Montgomery: Design and Analysis of Experiments, 5th ed., Wiley, New York, 2001, pp. 21–23.
14. G.E.P. Box and K.B. Wilson: J. R. Stat. Soc., 1951, vol. 13, pp. 1–45.
15. M. Miles, T. Nelson, and D. Melton: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3335–42.10.1007/s11661-005-0008-4 ↗
16. A.A. Zadpoor, J. Sinke, R. Benedictus, and R. Pieters: Mater. Sci. Eng. A, 2008, vol. 494, pp. 281–90.10.1016/j.msea.2008.04.042 ↗
17. D.M. Rodrigues, A. Loureiro, C. Leitao, R.M. Leal, B.M. Chaparro, and P. Vilaca: Mater. Amp. Des., 2009, vol. 30, pp. 1913–21.10.1016/j.matdes.2008.09.016 ↗
18. I. Shigematsu, Y.J. Kwon, K. Suzuki, T. Imai, and N. Saito: J. Mater. Sci. Lett., 2003, vol. 22, pp. 353–56.10.1023/A:1022688908885 ↗
19. C. Leitao, R.M. Leal, D.M. Rodrigues, A. Loureiro, and P. Vilaca: Mater. Des., 2009, vol. 30, pp. 101–08.10.1016/j.matdes.2008.04.045 ↗
20. M.P. Miles, B.J. Decker, and T.W. Nelson: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3461–68.10.1007/s11661-004-0183-8 ↗
21. P. Janjaki Ramulu, R. Ganesh Narayanan, S.V. Kailas, and J. Reddy: Adv. Mater. Res., 2012, vol. 410, pp. 287–90.10.4028/www.scientific.net/AMR.410.287 ↗