journal article·2007-05

A Probabilistic Model of Fatigue Strength Controlled by Porosity Population in a 319-Type Cast Aluminum Alloy: Part I. Model Development

X. Zhu, J.Z. Yi, J.W. Jones, J.E. Allison

Publisher page

Abstract

The very high-cycle fatigue behavior of a 319-type cast aluminum alloy was investigated using ultrasonic fatigue instrumentation operating at 20 kHz. An endurance limit was demonstrated in the lifetime regime beyond 107 cycles. Accordingly, the fatigue strength at 108 cycles was determined using the staircase test method. Large pores at or close to the specimen surface or in the specimen interior were responsible for crack initiation in all specimens, and the staircase results were associated with both size and location of the initiating pores through a critical stress intensity factor for fatigue crack growth. Based on the experimental observations, a probabilistic model was developed to establish the relationship between the porosity population and the fatigue strength of the alloy. Good agreement was obtained between the modeling results and experiments.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. C. Nyahumwa, N.R. Green, J. Campbell: Metall. Mater. Trans. A, 2001, 32A: 349–5810.1007/s11661-001-0266-8 ↗
2. J.M. Boileau, J.E. Allison: Metall. Mater. Trans. A, 2003, 34A:1807–2010.1007/s11661-003-0147-4 ↗
3. J.M. Boileau, J.W. Zindel, J.E. Allison: SAE Technical Paper Series, 1997, 970019
4. M.J. Caton, J.W. Jones, J.E. Allison: Mater. Sci. Eng. A, 2001, 314:81–8510.1016/S0921-5093(00)01916-X ↗
5. Y.X. Gao, J.Z. Yi, P.D. Lee, T.C. Lindley: Fatigue Fract. Eng. Mater. Struct., 2004, 27: 559–7010.1111/j.1460-2695.2004.00780.x ↗
6. Q.G. Wang: J. Mater. Manufacturing, 2004, 112:396–404
7. J.Z. Yi, Y.X. Gao, P.D. Lee, T.C. Lindley: Metall. Mater. Trans. B, 2006, 37B: 301–11
8. M.J. Couper, A.E. Neeson, J.R. Griffiths: Fatigue Fract. Eng. Mater. Struct., 1990, 13:213–2710.1111/j.1460-2695.1990.tb00594.x ↗
9. K. Shiozawa, Y. Tohda, S.-M. Sun: Fatigue Fract. Eng. Mater. Struct., 1997, 20: 237–4710.1111/j.1460-2695.1997.tb00281.x ↗
10. M.J. Caton, J.W. Jones, J.M. Boileau, J.E. Allison: Metall. Mater. Trans. A, 1999, 30A: 3055–6810.1007/s11661-999-0216-4 ↗
11. M.J. Caton, J.W. Jones, H. Mayer, S. Stanzl-Tschegg, J.E. Allison: Metall. Mater. Trans. A, 2003, 34A:33–4110.1007/s11661-003-0206-x ↗
12. B. Skallerud, T. Iveland, G. Harkegard: Eng. Fract. Mech., 1993, 44:857–7410.1016/0013-7944(93)90108-5 ↗
13. Y. Murakami: Metal Fatigue: Effect of Small Defects and Nonmetallic Inclusions, Elsevier Science Ltd., Boston, MA, 2002, p. 369
14. Y.X. Gao, J.Z. Yi, P.D. Lee, T.C. Lindley: Acta Mater., 2004, 52: 5435–4910.1016/j.actamat.2004.07.035 ↗
15. H. Mayer: Int. Mater. Rev., 1999, 44: 1–3410.1179/imr.1999.44.1.1 ↗
16. X. Zhu, A. Shyam, J.W. Jones, H. Mayer, J.V. Lasecki, J.E. Allison: Int. J. Fatigue, 3rd Int. Conf. on Very High Cycle Fatigue (VHCF-3), 2006, 28:1566–71
17. J.A. Collins: Failure of Materials in Mechanical Design, John Wiley & Sons, New York, NY, 1981, pp. 383–88
18. C.C. Engler-Pinto, Jr., J.V. Lasecki, R.J. Frisch, Sr., M.A. DeJack, and J.E. Allison: SAE Technical Paper Series, 2005, 2005-01-0802
19. Y. Murakami, M. Endo: Int. J. Fatigue, 1994, 16:163–8210.1016/0142-1123(94)90001-9 ↗
20. K. Gall, M.F. Horstemeyer, B.W. Degner, D.L. McDowell, J. Fan: Int. J. Fract., 2001, 108:207–3310.1023/A:1011033304600 ↗
21. J. Cheong: Master’s Thesis, Imperial College, London, United Kingdom, 2002
22. S.G. Lee, A.M. Gokhale, A. Sreeranganathan: Mater. Sci. Eng. A, 2006, 427:92–9810.1016/j.msea.2006.04.095 ↗
23. R.L. Fullman: Trans. AIME, 1953, 197:447–52
24. E.E. Underwood: Quantitative Stereology, Addison-Wesley, London, 1970, pp. 109–45
25. J.E. Spowart, B. Maruyama, D.B. Miracle: Mater. Sci. Eng. A, 2001, 307:51–6610.1016/S0921-5093(00)01962-6 ↗
26. Q.G. Wang, D. Apelian, D.A. Lados: J. Light Met., 2001, 1: 73–8410.1016/S1471-5317(00)00008-0 ↗
27. J.Z. Yi, Y.X. Gao, P.D. Lee, H.M. Flower, T.C. Lindley: Metall. Mater. Trans. A, 2003, 34A: 1879–9010.1007/s11661-003-0153-6 ↗
28. H. Mayer, M. Papakyriacou, B. Zettl, S.E. Stanzl-Tschegg: Int. J. Fatigue, 2003, 25:245–5610.1016/S0142-1123(02)00054-3 ↗
29. C.C. Engler-Pinto, Jr., R.J. Frisch, Sr., J.V. Lasecki, and J.E. Allison: SAE Technical Paper Series, 2006, 2006–01–0540
30. X. Zhu, J.Z. Yi, J.W. Jones, and J.E. Allison: Fatigue 2006—9th Int. Congr. on Fatigue, Atlanta, GA, 2006
31. J.A. Collins: Failure of Materials in Mechanical Design, John Wiley & Sons, New York, NY, 1981, p. 629
32. J.-Y. Buffiere, S. Savelli, P.H. Jouneau, E. Maire, R. Fougeres: Mater. Sci. Eng., 2001, A316:115–2610.1016/S0921-5093(01)01225-4 ↗
33. Q.G. Wang, D. Apelian, D.A. Lados: J. Light Met., 2001, 1:85–9710.1016/S1471-5317(00)00009-2 ↗
34. J.C. Ting, V. Frederick, F.V. Lawrence: Fatigue Fract. Eng. Mater. Struct., 1993, 16: 631–4710.1111/j.1460-2695.1993.tb00108.x ↗
35. M.E. Seniw, J.G. Conley, M.E. Fine: Mater. Sci. Eng. A, 2000, 285: 43–4810.1016/S0921-5093(00)00663-8 ↗
36. M.J. Caton, J.W. Jones, and J.E. Allison, in Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP 1732, J.C.J. Newman and R.S. Piascik, eds., ASTM, Philadelphia, PA, 2000, pp. 285–30310.1520/STP13439S ↗
37. M.J. Caton, J.W. Jones, J.M. Boileau, J.E. Allison: Metall. Mater. Trans. A, 1999, 30A: 3055–6810.1007/s11661-999-0216-4 ↗
38. A. Shyam, J.E. Allison, J.W. Jones: Acta Mater., 2005, 53: 1499–150910.1016/j.actamat.2004.12.004 ↗
39. M.J. Caton: Ph.D. Thesis, University of Michigan, Ann Arbor, MI, 2000
40. S.E. Stanzl-Tschegg, H.R. Mayer, E.K. Tschegg, A. Beste: Int. J. Fatigue, 1993, 15: 311–1610.1016/0142-1123(93)90380-9 ↗
41. M.J. Couper, J.R. Griffiths: Fatigue Fract. Eng. Mater. Struct., 1990, 13:615–2410.1111/j.1460-2695.1990.tb00631.x ↗
42. R.W. Hamilton, D. See, S. Butler, P.D. Lee: Mater. Sci. Eng. A, 2003, 343:290–30010.1016/S0921-5093(02)00376-3 ↗