The Mechanism of High Ductility for Novel High-Carbon Quenching–Partitioning–Tempering Martensitic Steel
Source abstract
Abstract
In this article, a novel quenching–partitioning–tempering (Q–P–T) process was applied to treat Fe-0.6C-1.5Mn-1.5Si-0.6Cr-0.05Nb hot-rolled high-carbon steel and the microstructures including retained austenite fraction and the average dislocation densities in both martensite and retained austenite were characterized by X-ray diffraction, scanning electron microscopy, and transmission electron microscopy, respectively. The Q–P–T steel exhibits high strength (1950 MPa) and elongation (12.4 pct). Comparing with the steel treated by traditional quenching and tempering (Q&T) process, the mechanism of high ductility for high-carbon Q–P–T steel is revealed as follows. Much more retained austenite existing in Q–P–T steel than in Q&T one remarkably enhances the ductility by the following two effects: the dislocation absorption by retained austenite effect and the transformation-induced plasticity effect. Besides, lower dislocation density in martensite matrix produced by Q–P–T process plays an important role in the improvement of ductility. However, some thin plates of twin-type martensite embedded in dislocation-type martensite matrix in high-carbon Q–P–T steel affect the further improvement of ductility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A-P Pierman, O Bouaziz, T Pardoen, PJ Jacques and L Brassart, Acta Mater. 2014, vol. 73, pp. 298–311.10.1016/j.actamat.2014.04.015 ↗
2. M. Sarwar and R. Priestner, J Mater Sci 1996, vol. 31, pp. 2091–95.10.1007/BF00356631 ↗
3. BC De Cooman, Curr. Opin. Solid State Mater. Sci. 2004, vol. 8, pp. 285–303.10.1016/j.cossms.2004.10.002 ↗
4. PJ Jacques, Curr. Opin. Solid State Mater. Sci. 2004, vol. 8, pp. 259–65.10.1016/j.cossms.2004.09.006 ↗
5. L. Li, P. Wollants, Y.L. He, B.C. De Cooman, X.C. Wei and Z.Y. Xu, Acta Metall. Sin. 2009, vol. 16, pp. 457–65.
6. C. Ouchi, ISIJ Int. 2001, vol. 41, pp. 542–53.10.2355/isijinternational.41.542 ↗
7. Jacques PJ, Furnémont Q, Lani F, Pardoen T, Delannay F, Acta Mater. 2007, vol. 55, pp. 3681–93.10.1016/j.actamat.2007.02.029 ↗
8. F. Lani, Q. Furnémont, T. Van Rompaey, F. Delannay, P.J. Jacques and T. Pardoen, Acta Mater. 2007, vol. 55, pp. 3695–705.10.1016/j.actamat.2007.02.015 ↗
9. A.K. Srivastava, G. Jha, N. Gope and S.B. Singh, Mater. Charact. 2006, vol. 57, pp. 127–35.10.1016/j.matchar.2006.01.010 ↗
10. J. Mahieu, B.C. De Cooman, and J. Maki, Metall. Mater. Trans. A 2002, vol. 33A, pp. 2573–80.10.1007/s11661-002-0378-9 ↗
11. J. Speer, D.K. Matlock, B.C. De Cooman and J.G. Schroth, Acta Mater. 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
12. J.G. Speer, D.V. Edmonds, F.C. Rizzo and D.K. Matlock, Curr. Opin. Solid State Mater. Sci. 2004, vol. 8, pp. 219–37.10.1016/j.cossms.2004.09.003 ↗
13. DV Edmonds, K He, FC Rizzo, BC De Cooman, DK Matlock and JG Speer, Mater. Sci. Eng.,A 2006, vol. 438, pp. 25–34.10.1016/j.msea.2006.02.133 ↗
14. K. Zhang, W. Xu, Z. Guo, Y. Rong, M. Wang and H. Dong, Acta Metall. Sin. 2011, vol. 47, pp. 489–96.
15. T.Y. Hsu and Z.Y. Xu, Mater. Sci. Forum, (Trans Tech Publ: 2007) 2007, vols. 561–565, pp 2283–86.10.4028/www.scientific.net/MSF.561-565.2283 ↗
16. S. Zhou, K. Zhang, Y. Wang, J.F. Gu and Y.H. Rong, Mater. Sci. Eng. A 2011, vol. 528, pp. 8006–12.10.1016/j.msea.2011.07.008 ↗
17. S. Zhou, K. Zhang, Y. Wang, J.F. Gu and Y.H. Rong, Metall. Mater. Trans. A 2012, vol. 43A, pp. 1026–34.10.1007/s11661-011-0929-z ↗
18. Y. Wang, K. Zhang, Z. Guo, N. Chen and Y. Rong, Mater. Sci. Eng. A 2012, vol. 552, pp. 288–94.10.1016/j.msea.2012.05.042 ↗
19. Y. Wang, K. Zhang, Z. Guo, N. Chen and Y. Rong, Acta Metall. Sin. 2012, vol. 48, pp. 641–48.10.3724/SP.J.1037.2012.00042 ↗
20. K. Zhang, M. Zhang, Z. Guo, N. Chen and Y. Rong, Mater. Sci. Eng. A 2011, vol. 528, pp. 8486–91.10.1016/j.msea.2011.07.049 ↗
21. V.F. Zackay, E.R. Parker, D. Fahr and R. Busch, ASM Trans. Q. 1967, vol. 60, pp. 252–59.
22. D. Webster, ASM Trans. Q. 1968, vol. 61, pp. 816–28.
23. F. Rui, Z. Meihan, C. Nailu, Z. Xunwei and R. Yonghua, Acta Metall. Sin. 2014, vol. 50, pp. 498–506.
24. R.F. Zhang, J. Wang, I.J. Beyerlein and T.C. Germann, Scripta Mater. 2011, vol. 65, pp. 1022–25.10.1016/j.scriptamat.2011.09.008 ↗
25. J Wang, A Misra, RG Hoagland and JP Hirth, Acta Mater. 2012, vol. 60, pp. 1503–13.10.1016/j.actamat.2011.11.047 ↗
26. G. Lasko, D. Saraev, S. Schmauder and P. Kizler, Comput. Mater. Sci. 2005, vol. 32, pp. 418–25.10.1016/j.commatsci.2004.09.024 ↗
27. S. Shao and S.N. Medyanik, Modell. Simul. Mater. Sci. Eng. 2010, vol. 18, p. 055010.10.1088/0965-0393/18/5/055010 ↗
28. S.-J. Kim, C.G. Lee, I. Choi and S. Lee, Metall. Mater. Trans. A 2001, vol. 32A, pp. 505–14.10.1007/s11661-001-0067-0 ↗
29. J.H. Jang, I.G. Kim and H.K.D.H. Bhadeshia, Comput. Mater. Sci. 2009, vol. 44, pp. 1319–26.10.1016/j.commatsci.2008.08.022 ↗
30. B.-J. Lee, CALPHAD 1992, vol. 16, pp. 121–49.10.1016/0364-5916(92)90002-F ↗
31. Mikhail Aleksandrovich Krivoglaz, 1969.
32. W. Woo, L. Balogh, T. Ungár, H. Choo and Z. Feng, Mater. Sci. Eng. A 2008, vol. 498, pp. 308–13.10.1016/j.msea.2008.08.007 ↗
33. W. Li, W. Xu, X. Wang and Y. Rong, J. Alloy. Compd. 2009, vol. 474, pp. 546–50.10.1016/j.jallcom.2008.06.136 ↗
34. A.R. Stokes, Proc. Phys. Soc. 1948, vol. 61, p. 382.10.1088/0959-5309/61/4/311 ↗
35. R.O. Ritchie, Nat. Mater. 2011, vol. 10, pp. 817–22.10.1038/nmat3115 ↗
36. J. Gubicza, N. Chinh, Z. Horita, T. Langdon, Mater. Sci. Eng. A 2011, vol. 387, pp. 55–59.
37. G. Krauss, Metall. Mater. Trans. A 2001, vol. 32A, pp. 861–77.10.1007/s11661-001-0344-y ↗