journal article·2021-05

Selective Laser Melting of Maraging Steels Using Recycled Powders: A Comprehensive Microstructural and Mechanical Investigation

Haokun Sun, Xin Chu, Zhiying Liu, Azimi Gisele, Yu Zou

Publisher page

Abstract

Selective laser melting (SLM) is an additive manufacturing (AM) technique designed to use a high energy density laser to fuse metallic powders for producing three-dimensional parts. So far, most studies of SLM have been focused on using virgin metal powders. There are few comprehensive studies on the microstructure and mechanical properties of SLM-produced parts using recycled powders, especially for maraging steels. In this study, we employ recycled steel powder (reused after 113 building cycles) in the SLM process to print multiple shaped components and systematically characterize the microstructure and mechanical properties (indentation, tensile, and Charpy testing). Our results show that maraging steel produced with recycled powder exhibit the nearly identical microstructure and mechanical properties (940 MPa yield strength, 1127 MPa ultimate tensile strength, 11 pct elongation, and 47.5 J room temperature impact fracture energy) to those produced using virgin powders. This study provides a useful generic guide towards using recycled metal powders in the SLM processing, promoting an economic solution to industrial productions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. E. I. Galindo-Nava, W. M. Rainforth and P. E. J. Rivera-Díaz-del-Castillo: Acta Mater., 2016, vol. 117, pp. 270-85.10.1016/j.actamat.2016.07.020 ↗
2. S. J. Midea: Heat Treat. Incl. Steel Heat Treat. New Millennium (ASM International, New York, 2000).
3. M. K. El-Fawkhry, M. Eissa, A. Fathy and T. Mattar: Mater. Today: Proc., 2015, vol. 2, pp. S711-S14.10.1016/j.matpr.2015.07.381 ↗
4. P. R. Sakai, M. S. F. Lima, L. Fanton, C. V. Gomes, S. Lombardo, D. F. Silva and A. J. Abdalla: Procedia Eng., 2015, vol. 114, pp. 291-97.10.1016/j.proeng.2015.08.071 ↗
5. T. Bhardwaj and M. Shukla: Mater. Today: Proc., 2019, vol. 18, pp. 3842-48.10.1016/j.matpr.2019.07.323 ↗
6. C.-C. Kuo and Z.-F. Jiang: Int. J. Adv. Manuf. Technol., 2019, vol. 104, pp. 4169-81.10.1007/s00170-019-04198-9 ↗
7. A. Fortunato, A. Lulaj, S. Melkote, E. Liverani, A. Ascari and D. Umbrello: Int. J. Adv. Manuf. Technol., 2017, vol. 94, pp. 1895-902.10.1007/s00170-017-0922-9 ↗
8. W. E. Frazier: J. Mater. Eng. Perform., 2014, vol. 23, pp. 1917-28.10.1007/s11665-014-0958-z ↗
9. C. Emmelmann, J. Kranz, D. Herzog and E. Wycisk: Laser Technol. Biomim.: Basics App., 2013, pp 143-62.10.1007/978-3-642-41341-4_6 ↗
10. H. Asgari, C. Baxter, K. Hosseinkhani and M. Mohammadi: J. Mater. Sci. Eng. A, 2017, vol. 707, pp. 148-58.10.1016/j.msea.2017.09.041 ↗
11. M. Baumers, P. Dickens, C. Tuck and R. Hague: Technol. Forecast. Soc. Change, 2016, vol. 102, pp. 193-201.10.1016/j.techfore.2015.02.015 ↗
12. L. Cordova, M. Campos and T. Tinga: JOM, 2019, vol. 71, pp. 1062-72.10.1007/s11837-018-3305-2 ↗
13. L. C. Ardila, F. Garciandia, J. B. González-Díaz, P. Álvarez, A. Echeverria, M. M. Petite, R. Deffley and J. Ochoa: Phys. Procedia, 2014, vol. 56, pp. 99-107.10.1016/j.phpro.2014.08.152 ↗
14. S. Dehgahi, M. H. Ghoncheh, A. Hadadzadeh, M. Sanjari, B. S. Amirkhiz and M. Mohammadi: Mater. Des., 2020, vol. 194, art. no. 108965.10.1016/j.matdes.2020.108965 ↗
15. J. A. Slotwinski, E. J. Garboczi, P. E. Stutzman, C. F. Ferraris, S. S. Watson and M. A. Peltz: J Res Natl Inst Stand Technol, 2014, vol. 119, pp. 460-93.10.6028/jres.119.018 ↗
16. A. Strondl, O. Lyckfeldt, H. Brodin and U. Ackelid: JOM, 2015, vol. 67, pp. 549-54.10.1007/s11837-015-1304-0 ↗
17. P. Quinn, S. O’Halloran, J. Lawlor and R. Raghavendra: Adv. Mater. Process. Technol., 2019, vol. 5, pp. 348-59.
18. Y. Sun, M. Aindow and R. J. Hebert: Mater. High Temp., 2017, vol. 35, pp. 217-24.10.1080/09603409.2017.1389133 ↗
19. V. V. Popov, A. Katz-Demyanetz, A. Garkun and M. Bamberger: Addit. Manuf., 2018, vol. 22, pp. 834-43.
20. A. H. Maamoun, M. Elbestawi, G. K. Dosbaeva and S. C. Veldhuis: Addit. Manuf., 2018, vol. 21, pp. 234-47.
21. A. Saboori, A. Aversa, F. Bosio, E. Bassini, E. Librera, M. De Chirico, S. Biamino, D. Ugues, P. Fino and M. Lombardi: J. Mater. Sci. Eng. A, 2019, vol. 766, art. no. 138360.10.1016/j.msea.2019.138360 ↗
22. P. E. Carrion, A. Soltani-Tehrani, N. Phan and N. Shamsaei: JOM, 2018, vol. 71, pp. 963-73.10.1007/s11837-018-3248-7 ↗
23. J. Suryawanshi, K. G. Prashanth and U. Ramamurty: J. Alloys Compd., 2017, vol. 725, pp. 355-64.10.1016/j.jallcom.2017.07.177 ↗
24. K. Kempen, E. Yasa, L. Thijs, J. P. Kruth and J. Van Humbeeck: Phys. Procedia (2011) , vol. 12, pp. 255-63.10.1016/j.phpro.2011.03.033 ↗
25. National Research Council: Accelerated Aging of Materials and Structures: The Effects of Long-Term Elevated-Temperature Exposure, The National Academies Press, Washington, DC, 1996, pp. 7-10.
26. A. N. D. Gasper, B. Szost, X. Wang, D. Johns, S. Sharma, A. T. Clare and I. A. Ashcroft: Addit. Manuf., 2018, vol. 24, pp. 446-56.
27. S. D. Meshram, G. M. Reddy and S. Pandey: Mater. Des., 2013, vol. 49, pp. 58-64.10.1016/j.matdes.2013.01.016 ↗
28. E. A. Jägle, Z. Sheng, P. Kürnsteiner, S. Ocylok, A. Weisheit and D. Raabe: Mater., 2017, vol. 10, art. no. 8.10.3390/ma10010008 ↗
29. E. A. Jägle, P. Choi, J. Van Humbeeck and D. Raabe: J. Mater. Res., 2014, vol. 29, pp. 2072-79.10.1557/jmr.2014.204 ↗
30. C. Tan, K. Zhou, M. Kuang, W. Ma and T. Kuang: Sci. Technol. Adv. Mater., 2018, vol. 19, pp. 746-58.10.1080/14686996.2018.1527645 ↗
31. J. Zhang, B. Song, Q. Wei, D. Bourell and Y. Shi: J. Mater. Sci. Technol., 2019, vol. 35, pp. 270-84.10.1016/j.jmst.2018.09.004 ↗
32. P. Kürnsteiner, M. B. Wilms, A. Weisheit, P. Barriobero-Vila, E. A. Jägle and D. Raabe: Acta Mater., 2017, vol. 129, pp. 52-60.10.1016/j.actamat.2017.02.069 ↗
33. L. Kučerová, I. Zetková, A. Jandová and M. Bystrianský: J. Mater. Sci. Eng. A, 2019, vol. 750, pp. 70-80.10.1016/j.msea.2019.02.041 ↗
34. J. Mutua, S. Nakata, T. Onda and Z.-C. Chen: Mater. Des., 2018, vol. 139, pp. 486-97.10.1016/j.matdes.2017.11.042 ↗
35. R. Casati, J. Lemke, A. Tuissi and M. Vedani: J. Met., 2016, vol. 6, art. no. 218.
36. M.-Y. Seok, I.-C. Choi, J. Moon, S. Kim, U. Ramamurty and J.-i. Jang: Scr. Mater., 2014, vol. 87, pp. 49-52.10.1016/j.scriptamat.2014.05.004 ↗
37. B. Mooney and K. Kourousis: J. Met., 2020, vol. 10, art. no. 1273.
38. C. Tan, K. Zhou, W. Ma, P. Zhang, M. Liu and T. Kuang: Mater. Des., 2017, vol. 134, pp. 23-34.10.1016/j.matdes.2017.08.026 ↗
39. T. Hermann Becker and D. Dimitrov: Rapid Prototyp. J., 2016, vol. 22, pp. 487-94.10.1108/RPJ-08-2014-0096 ↗
40. L. Mugwagwa, I. Yadroitsev, and S. Matope: J. Met., 2019, vol. 9, art. no. 1042.
41. B. Zhang, S. Liu and Y. C. Shin: Addit. Manuf., 2019, vol. 28, pp. 497-505.
42. M. Hasegawa: Treatise Process Metall., 2014, vol. 1, pp 507-16.10.1016/B978-0-08-096986-2.00032-1 ↗
43. B. Liu, B.-Q. Li and Z. Li: Results Phys., 2019, vol. 12, pp. 982-88.10.1016/j.rinp.2018.12.018 ↗
44. S. Lu, H. Fujii and K. Nogi: J. Mater. Sci. Eng. A, 2004, vol. 380, pp. 290-97.10.1016/j.msea.2004.05.057 ↗
45. K. C. Mills, B. J. Keene, R. F. Brooks, A. Shirali: Philos. Trans. R. Soc. A, 1998, vol. 356, pp. 911-25.10.1098/rsta.1998.0196 ↗
46. L. Thijis, J. V. Humbeeck, K. Kempen, E. Yasa, J. P. Kruth and M. Rombouts: Innovative Dev. in Virtual Phys. Prototyping, ed. P. J. Bartolo (CRC Press: Portugal, 2011), pp. 297–304.10.1201/b11341-48 ↗
47. M. Masoumi, I. F. de Barros, L. F. G. Herculano, H. L. F. Coelho and H. F. G. de Abreu: Mater. Charact., 2016, vol. 120, pp. 203-09.10.1016/j.matchar.2016.09.003 ↗
48. A. Gupta, S. Goyal, K. A. Padmanabhan and A. K. Singh: Int. J. Adv. Manuf. Technol., 2014, vol. 77, pp. 565-72.10.1007/s00170-014-6464-5 ↗
49. S. K. Dhua, A. Ray, S. K. Sen, M. S. Prasad, M. K. B and S. Jha: J. Mater. Eng. Perform., 2000, vol. 9, pp. 700-09.10.1361/105994900770345584 ↗
50. Y. Murakami: JSME Int. J., 1989, vol. 32, pp. 167-80.
51. Y. Murakami and H. Usuki: Int. J. Fatigue, 1989, vol. 11, pp. 299-307.10.1016/0142-1123(89)90055-8 ↗
52. E. Sadeghi, P. Karimi, N. Israelsson, J. Shipley, T. Mansson and T. Hansson: Addit. Manuf., 2020, vol. 36, art. no. 101670.
53. A. Soltani-Tehrani, J. Pegues and N. Shamsaei: Addit. Manuf., vol. 36, 2020, art. no. 101398.
54. P. E. Carrion, A. Soltani-Tehrani, N. Phan and N. Shamsaei: JOM, vol.71, 2019, pp. 963–73.10.1007/s11837-018-3248-7 ↗
55. A. T. Sutton, C. S. Kriewall, S. Karnati, M. C. Leu and J. W. Newkirk: Addit. Manuf., 2020, vol. 32, art. no. 100981.
56. N. E. Gorji, R. O’Connor, A. Mussatto, M. Snelgrove, P. G. M. González and D. Brabazon: Materialia, 2019, vol. 8, art. no. 100489.10.1016/j.mtla.2019.100489 ↗