Directional Solidification of a Nickel-Based Superalloy Product Structure Fabricated on Stainless Steel Substrate by Electron Beam Additive Manufacturing
Source abstract
Abstract
This article is the first to apply wire-feed electron beam additive manufacturing in vacuum to fabricate a part from a complex nickel-based superalloy with directional structure on a stainless steel substrate. It is shown that the determining factor for the formation of parts with directional structure is the local metallurgy conditions implemented in electron beam additive manufacturing. These conditions are the magnitude and direction of the temperature gradient as well as the geometry (shape) of the solidification front in the molten pool. The substrate effect (both chemical and structural) on the composition and structure of the part material is cancelled out at a distance not exceeding 8.0 mm from the substrate. Thus, the proposed 3D printing method is quite acceptable for the manufacturing of parts from heat-resistant nickel alloys with directional structure on substrates made of less expensive materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. A.P. Mouritz, ed.: in Introduction to Aerospace Materials, Woodhead Publishing, Sawston, 2012, pp. 251–67.10.2514/4.869198 ↗
2. 2So-Young Im, Sun-Young Jun, Ji-Won Lee, et al.: J. Alloy. Compd., 2020, vol. 817, p. 15332010.1016/j.jallcom.2019.153320 ↗
3. 3K.N. Kalashnikov, V.E. Rubtsov, N.L. Savchenko, T.A. Kalashnikova, K.S. Osipovich, A.A. Eliseev, and A. V Chumaevskii: Int. J. Adv. Manuf. Technol., 2019, vol. 105, pp. 3147–56.10.1007/s00170-019-04589-y ↗
4. 4D. Greitemeier, C.D. Donne, F. Syassen, J. Eufinger, and T. Melz: Mater. Sci. Technol., 2016, vol. 32, pp. 629–34.10.1179/1743284715Y.0000000053 ↗
5. 5D.A. Gurianov, S. V Fortuna, and K.S. Osipovich: AIP Conf. Proc., 2019, vol. 2167, p. 20125.10.1063/1.5131992 ↗
6. 6P. Karimi, E. Sadeghi, P. Åkerfeldt, J. Ålgårdh, and J. Andersson: Mater. Des., 2018, vol. 160, pp. 427–41.10.1016/j.matdes.2018.09.038 ↗
7. 7W. Kurz: Adv. Eng. Mater.,2001, vol. 3, pp. 443-452.10.1002/1527-2648(200107)3:7<443::AID-ADEM443>3.0.CO;2-W ↗
8. 8M.M. Kirka, F. Medina, R. Dehoff, and A. Okello: Mater. Sci. Eng. A, 2017, vol. 680, pp. 338–46.10.1016/j.msea.2016.10.069 ↗
9. 9R.R. Dehoff, M.M. Kirka, W.J. Sames, H. Bilheux, A.S. Tremsin, L.E. Lowe, and S.S. Babu: Mater. Sci. Technol., 2015, vol. 31, pp. 931–8.10.1179/1743284714Y.0000000734 ↗
10. 10R.R. Dehoff, M.M. Kirka, F.A. List, K.A. Unocic, and W.J. Sames: Mater. Sci. Technol., 2015, vol. 31, pp. 939–44.10.1179/1743284714Y.0000000697 ↗
11. 11M.M. Kirka, K.A. Unocic, N. Raghavan, F. Medina, R.R. Dehoff, and S.S. Babu: JOM, 2016, vol. 68, pp. 1012–20.10.1007/s11837-016-1812-6 ↗
12. 12Z. Lei, N. Lu, and X. Yu: J. Manuf. Process., 2019, vol. 42, pp. 11–9.10.1016/j.jmapro.2019.04.016 ↗
13. Institute of Strength Physics and Material Science of Siberian Branch of Russian Academy of Sciences (2008), http://ispms.ru/ru/872 (In Russian). Accessed 01 Sept 2020.
14. 15A. Basak and S. Das: J. Alloys Compd., 2017, vol. 705, pp. 806–16.10.1016/j.jallcom.2017.02.013 ↗
15. “VIAM” FSUE, RF SRC (2020), https://viam.ru/en/viam_offers2. Accessed 05 Sept 2020.
16. 14E.N. Kablov, N. V Petrushin, and P.I. Parfenovich: Met. Sci. Heat Treat., 2018, vol. 60, pp. 106–14.10.1007/s11041-018-0247-9 ↗
17. AZO Materials (2001), https://www.azom.com/article.aspx?ArticleID=967. Accessed 15 Oct 2019.
18. 18A. Gontcharov, Y. Tian, P. Lowden, and M. Brochu: J. Eng. Gas Turbines & Power, 2019, vol. 141, p. 041031.10.1115/1.4041009 ↗
19. 19Y.P. Mironov, L.L. Meisner, and A.I. Lotkov: Tech. Phys., 2008, vol. 53, pp. 934–42.10.1134/S1063784208070189 ↗
20. 20N.A. Kuzmina, V.A. Lifshitz, E.N. Potrakhov, and N.N. Potrakhov: Trudy VIAM, 2019, vol. 9, pp. 15–25 (In Russian).
21. D. Grange, A. Queva, G. Guillemot, M. Bellet, J.-D. Bartout, and C. Colin: J. Mater. Process. Technol., 2020.
22. 23N. Lu, Z. Lei, K. Hu, X. Yu, P. Li, J. Bi, S. Wu, and Y. Chen: Addit. Manuf., 2020, vol. 34, p. 101228.
23. ISO 857-1:2002 Welding and allied processes—Vocabulary—Part 1: Metal welding processes.
24. 21G. Asala, J. Andersson, and O.A. Ojo: Mater. Sci. Eng. A, 2018, vol. 738, pp. 111–24.10.1016/j.msea.2018.09.079 ↗
25. 25J. Liang, Y. Liu, J. Li, Y. Zhou, and X. Sun: J. Mater. Sci. Technol., 2019, vol. 35, pp. 344–50.10.1016/j.jmst.2018.10.011 ↗
26. 26J. Belan: Mater. Today Proc., 2016, vol. 3, pp. 936–41.10.1016/j.matpr.2016.03.024 ↗
27. J. Ramos, J. Murphy, K. Lappo, K. Wood, D. Bourell, and J. Beaman: The Solid Freeform Fabrication Symposium, 2002, pp. 211–23.
28. 29J. Wang, X. Lin, J. Wang, H. Yang, Y. Zhou, C. Wang, Q. Li, and W. Huang: J. Alloys Compd., 2018, vol. 768, pp. 97–113.10.1016/j.jallcom.2018.07.235 ↗
29. 30Y. Chen, F. Lu, K. Zhang, P. Nie, S.R.E. Hosseini, K. Feng, and Z. Li: J. Alloys Compd., 2016, vol. 670, pp. 312–21.10.1016/j.jallcom.2016.01.250 ↗
30. 31M.J. Bermingham, D.H. StJohn, J. Krynen, S. Tedman-Jones, and M.S. Dargusch: Acta Mater., 2019, vol. 168, pp. 261–74.10.1016/j.actamat.2019.02.020 ↗
31. 32A. Ramakrishnan and G.P. Dinda: Mater. Sci. Eng. A, 2019, vol. 740–741, pp. 1–13.10.1016/j.msea.2018.10.020 ↗
32. 33Z. Liu and H. Qi: Acta Mater., 2015, vol. 87, pp. 248–58.10.1016/j.actamat.2014.12.046 ↗
33. 34Y.-J. Liang, X. Cheng, J. Li, and H.-M. Wang: Mater. Des., 2017, vol. 130, pp. 197–207.10.1016/j.matdes.2017.05.066 ↗
34. 35P. Liu, Z. Wang, Y. Xiao, M.F. Horstemeyer, X. Cui, and L. Chen: Addit. Manuf., 2019, vol. 26, pp. 22–9.
35. 36A. Epishin, U. Brückner, P.D. Portella, and T. Link: Scr. Mater., 2003, vol. 48, pp. 455–9.10.1016/S1359-6462(02)00436-0 ↗
36. 27Y. Zhang, B. Huang, and J. Li: Metall. Mater. Trans. A, 2013, vol. 44, pp. 1641–4.10.1007/s11661-013-1645-7 ↗
37. 37Y.-J. Liang, J. Li, A. Li, X.-T. Pang, and H.-M. Wang: Scr. Mater., 2017, vol. 127, pp. 58–62.10.1016/j.scriptamat.2016.08.039 ↗
38. 38Z. Zhou, L. Huang, Y. Shang, Y. Li, L. Jiang, and Q. Lei: Mater. Des., 2018, vol. 160, pp. 1238–49.10.1016/j.matdes.2018.10.042 ↗
39. 39A.G. Evgenov, O.A. Bazyleva, N.A. Golovlev, and D.V. Zaitsev: Trudy VIAM, 2018, vol. 72, pp. 25–36 (In Russian).