Mechanical Behavior of Fresh and Tempered Martensite in a CrMoV-Alloyed Steel Explained by Microstructural Evolution and Strength Modeling
Source abstract
Abstract
Abstract The mechanical behavior of a wear-resistant CrMoV-alloyed martensitic steel in quenched and tempered conditions has been investigated and correlated with the microstructure. The steel has a combination of ultra-high tensile strength of 2065 MPa and total elongation of 7.4 pct in the as-quenched condition. The strength and ductility of the steel change initially during tempering and thereafter remain quite stable during tempering at either 450 °C or 550 °C. A good combination of yield strength and total elongation is achieved after tempering at 550 °C for 2 to 8 hours (about 1300 MPa and 14 pct). The evolution of the mechanical properties can be mainly related to an initial condition with high density of dislocations (in the order of 1015) and carbon in solid solution, while quite early during tempering, dislocations will start to annihilate and carbide precipitates form. On the other hand, there is a negligible evolution of the effective grain size during tempering. Modeling of the individual strengthening mechanisms and the overall yield strength is in good agreement with the tensile test results, in particular for the tempered samples. Finally, the relatively low yield strength of the fresh martensite, significantly lower than for the tempered conditions, is discussed in relation to the two available theories.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. [1] N. Kamikawa, K. Sato, G. Miyamoto, M. Murayama, N. Sekido, K. Tsuzaki and T. Furuhara: Acta Mater., 2016, vol. 83, pp. 383-96.10.1016/j.actamat.2014.10.010 ↗
2. [2] T. Zhou, R.P. Babu, J. Odqvist, H. Yu, P. Hedström: Mater. Des., 2018, vol. 143, pp. 141-9.10.1016/j.matdes.2018.01.049 ↗
3. [3] S. Morito, H. Saito, T. Ogawa, T. Furuhara and T. Maki: ISIJ int., 2005, vol. 45, pp. 91-4.10.2355/isijinternational.45.91 ↗
4. [4] S. Morito, X. Huang, T. Furuhara, T. Maki and N. Hansen: Acta Mater., 2006, vol. 54, pp. 5323-31.10.1016/j.actamat.2006.07.009 ↗
5. [5] S. Morito, H. Tanaka, R. Konishi, T. Furuhara and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789-99.10.1016/S1359-6454(02)00577-3 ↗
6. [6] S. Morito, Y. Adachi and T. Ohba: Mater. Trans., 2009, vol. 50, pp. 1919-23.10.2320/matertrans.MRA2008409 ↗
7. [7] L. Morsdorf, C.C. Tasan, D. Ponge and D. Raabe: Acta Mater., 2015, vol. 95, pp. 366-77.10.1016/j.actamat.2015.05.023 ↗
8. [8] H. Kitahara, R. Ueji, N. Tsuji and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279-88.10.1016/j.actamat.2005.11.001 ↗
9. [9] C. Zhang, Q. Wang, J. Ren, R. Li, M. Wang, F. Zhang and K. Sun: Mater. Sci. Eng. A, 2012, vol. 534, pp: 339-46.10.1016/j.msea.2011.11.078 ↗
10. [10] C. Zhang, Q. Wang, J. Ren, R. Li, M. Wang, F. Zhang and Z. Yan: Mater. Des., 2012, vol. 36, pp. 220-26.10.1016/j.matdes.2011.11.026 ↗
11. [11] A. Stormvinter, G. Miyamoto, T. Furuhara, P. Hedström, A. Borgenstam: Acta Mater., 2012, vol. 60, pp. 7265-74.10.1016/j.actamat.2012.09.046 ↗
12. [12] T. Zhou, J. Faleskog, R.P. Babu, J. Odqvist, H. Yu and P. Hedström: Mater. Sci. Eng. A, 2019, vol. 745, pp. 420-28.10.1016/j.msea.2018.12.126 ↗
13. [13] J. Klemm-Toole, J. Benz, I. Vieira, A.J. Clarke, S.W. Thompson, K.O. Findley: Mater. Sci. Eng. A, 2020, vol. 786, pp. 139419.10.1016/j.msea.2020.139419 ↗
14. [14] Z. Hou, P. Hedström, Q. Chen, Y. Xu, D. Wu and J. Odqvist: Calphad, 2016, vol. 53, pp. 39-48.10.1016/j.calphad.2016.03.001 ↗
15. [15] Y. Wu, W. Sun, X. Gao, M. Styles, A. Arlazarov, C. Hutchinson: Acta Mater., 2020, vol. 183, pp. 418-37.10.1016/j.actamat.2019.11.040 ↗
16. [16] Z. Hou, R.P. Babu, P. Hedström, J. Odqvist: Mater. Sci. Tech., 2020, vol. 36, pp. 887-93.10.1080/02670836.2020.1740380 ↗
17. [17] A. Výrostková, A. Kroupa, J. Janovec and M. Svoboda: Acta Mater., 1998, vol. 46, pp. 31-8.10.1016/S1359-6454(97)00238-3 ↗
18. [18] A. Kroupa, A. Výrostková, M. Svoboda and J. Janovec: Acta Mater., 1998, vol. 46, pp. 39-49.10.1016/S1359-6454(97)00239-5 ↗
19. [19] J. Janovec, M. Svoboda, A. Výrostková and A. Kroupa: Mater. Sci. Eng. A, 2005, vol. 402, pp. 288-93.10.1016/j.msea.2005.04.048 ↗
20. [20] M. Rahaman, W. Mu, J. Odqvist, P. Hedström: Metall. Mater. Trans. A, 2019, vol. 50, pp. 2081-91.10.1007/s11661-019-05170-8 ↗
21. https://www.ferritico.com/. Accessed 10 May 2020.
22. [22] T. Ungár and A. Borbély: Appl. Phys. Lett., 1996, vol. 69, pp. 3173-5.10.1063/1.117951 ↗
23. [23] B. Warren and B. Averbach: J. Appl. Phys., 1952, vol. 23, pp. 497.10.1063/1.1702234 ↗
24. [24] G. Williamson and W. Hall: Acta metall., 1953, vol.1, pp. 22-31.10.1016/0001-6160(53)90006-6 ↗
25. [25] T. Shintani and Y. Murata: Acta Mater., 2011, vol. 59, pp. 4314-22.10.1016/j.actamat.2011.03.055 ↗
26. [26] S. Takebayashi, T. Kunieda, N. Yoshinaga, K. Ushioda and S. Ogata: ISIJ Int., 2010, vol. 50, pp. 875-82.10.2355/isijinternational.50.875 ↗
27. [27] S.H. Nedjad and M.R.M. Gharabagh: Int. J. Mater. Res., 2008, vol. 99, pp. 1248-55.10.3139/146.101759 ↗
28. [28] E. Kozeschnik, J. Svoboda, P. Fratzl and F. Fischer: Mater. Sci. Eng. A, 2004, vol. 385, pp. 157-65.
29. [29] J. Svoboda, F. Fischer, P. Fratzl and E. Kozeschnik: Mater. Sci. Eng. A, 2004, vol. 385, pp. 166-74.
30. [30] S. Zamberger, L. Whitmore, S. Krisam, T. Wojcik and E. Kozeschnik: Model. Simul. Mater. Sci. Eng., 2015, vol. 23, pp. 055012.10.1088/0965-0393/23/5/055012 ↗
31. [31] S. Zamberger, T. Wojcik, J. Klarner, G. Klösch, H. Schifferl and E. Kozeschnik: Steel Res. Int., 2013, vol. 84, pp. 20-30.10.1002/srin.201200047 ↗
32. Zhou T, Hou Z, Prasath Babu R, Odqvist J, Hedström P (2020) Materialia 9:10063010.1016/j.mtla.2020.100630 ↗
33. [33] M. Hillert and J. Ågren: Scr. Mater., 2004, vol. 50, pp. 697-9.10.1016/j.scriptamat.2003.11.020 ↗
34. [34] B. Sonderegger and E. Kozeschnik: Metall. Mater. Trans. A, 2009, vol. 40, pp. 499-510.10.1007/s11661-008-9752-6 ↗
35. [35] B. Sonderegger and E. Kozeschnik: Scr. Mater., 2009, vol. 60, pp. 635-8.10.1016/j.scriptamat.2008.12.025 ↗
36. Kim B, Boucard E, Sourmail T, San Martín D, Gey N, Rivera-Díaz-del-Castillo P (2014) Acta Mater 68:169-7810.1016/j.actamat.2014.01.039 ↗
37. [37] S. Morito, H. Yoshida, T. Maki and X. Huang: Mater. Sci. Eng. A, 2006, vol. 438-40, pp. 237-40.10.1016/j.msea.2005.12.048 ↗
38. [38] M. Roberts: Metall. Trans., 1970, vol. 1, pp. 3287-94.10.1007/BF03037855 ↗
39. [39] A. Shibata, T. Nagoshi, M. Sone, S. Morito and Y. Higo: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7538-44.10.1016/j.msea.2010.08.026 ↗
40. [40] Y. Tomita and K. Okabayashi: Metall. Trans. A, 1986, vol. 17, pp. 1203-9.10.1007/BF02665319 ↗
41. [41] B.B. He, B. Hu, H.W. Yen, G.J. Cheng, Z.K. Wang, H.W. Luo and M.X. Huang: Science, 2017, vol. 357, pp. 1029-32.10.1126/science.aan0177 ↗
42. [42] S S. Allain, O. Bouaziz and M. Takahashi: ISIJ Int., 2012, vol. 52, pp. 717-22.10.2355/isijinternational.52.717 ↗
43. [43] E. Galindo-Nava and P. Rivera-Díaz-del-Castillo: Acta Mater., 2015, vol. 98, pp. 81-93.10.1016/j.actamat.2015.07.018 ↗
44. K. Nakashima, Y. Fujimura, H. Matsubayashi, T. Tsuchiyama, and S.Takaki: Proc. 1st Int. Symp. on Steel Sci., ISIJ, Tokyo, 2007, p. 215.
45. [45] B. Hutchinson, P. Bate, D. Lindell, A. Malik, M. Barnett, P. Lynch: Acta Mater., 2018, vol. 152, pp. 239-47.10.1016/j.actamat.2018.04.039 ↗
46. [46] B. Hutchinson, D. Lindell and M. Barnett: ISIJ Int., 2015, vol. 55, pp. 1114-22.10.2355/isijinternational.55.1114 ↗
47. [47] M. Saeglitz and G. Krauss: Metall. Mater. Trans. A, 1997, vol. 28, pp. 377-87.10.1007/s11661-997-0139-x ↗
48. [48] N. Kamikawa, Y. Abe, G. Miyamoto, Y. Funakawa and T. Furuhara: ISIJ Int., 2014, vol. 54, pp. 212-21.10.2355/isijinternational.54.212 ↗
49. [49] T. Zhou, H. Yu, J. Hu and S. Wang: Mater. Sci. Eng. A, 2014, vol. 615, pp. 436-46.10.1016/j.msea.2014.07.101 ↗
50. [50] E. Pavlina and C. Van Tyne: J. Mater. Eng. Perform., 2008, vol. 17, pp. 888-93.10.1007/s11665-008-9225-5 ↗
51. [51] J. Fu, G. Li, X. Mao and K. Fang: Metall. Mater. Trans. A, 2011, vol. 42, pp. 3797-812.10.1007/s11661-011-0767-z ↗
52. [52] E. Hall: Proceed. Phys. Soc., 1951, vol. 64, pp. 747.10.1088/0370-1301/64/9/303 ↗
53. [53] N. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25-8.
54. [54] J.S. Wang, M.D. Mulholland, G.B. Olson and D.N. Seidman: Acta Mater., 2013, vol. 61, pp. 4939-52.10.1016/j.actamat.2013.04.052 ↗
55. [55] B. Wang, Z. Liu, X. Zhou, G. Wang and R.D.K. Misra: Mater. Sci. Eng. A, 2013, vol.575, pp. 189-98.10.1016/j.msea.2013.02.071 ↗
56. [56] H. Wen, T.D. Topping, D. Isheim, D.N. Seidman and E.J. Lavernia. Acta Mater., 2013, vol. 61, pp. 2769-82.10.1016/j.actamat.2012.09.036 ↗