journal article·2019-04-15Open access

Microstructure Evolution of Binary and Multicomponent Manganese Steels During Selective Laser Melting: Phase-Field Modeling and Experimental Validation

Julia Kundin, Ali Ramazani, Ulrich Prahl, Christian Haase

Abstract

In additive manufacturing processes, solidification velocities are extremely high in comparison to ordinary directional solidification. Therefore, the dependencies of the primary dendrite arm spacing (PDAS) on the process parameters deviate from the dependencies predicted by standard analytical methods. In this work, we investigate the microstructure evolution and element distribution in Fe-18.9Mn and Fe-18.5Mn-Al-C alloys solidified during the selective laser melting process. A quantitative multicomponent phase-field model verified by Green-function calculations (Karma, Rappel: Phys. Rev. E, 1998, 57, 4323) and the convergence analysis is used. The resulting non-standard dependencies of the PDAS on the process parameters in a wide range of solidification velocities are compared with analytical calculations. It is shown that the numerical values of the PDAS are similar to the values predicted by the Kurz–Fisher method for the low and intermediate solidification velocities and are smaller for the solidification velocities higher than 0.03 m/s. The PDAS and the Mn distribution in a Fe-18.5Mn-Al-C alloy are compared to the experimental results and a very good agreement is found.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. V. Fallah, M. Amoorezaei, N. Provatas, S.F. Corbin, A. Khajepour, Acta Mater. 60, 1633–1646 (2012).10.1016/j.actamat.2011.12.009 ↗
2. W. Wang, P.D. Lee, M. McLean, Acta Mater. 51, 2971–2987 (2003).10.1016/S1359-6454(03)00110-1 ↗
3. X. Gong, K. Chou, JOM 67, 1176–1182 (2015).10.1007/s11837-015-1352-5 ↗
4. J. Kundin, L. Mushongera, H. Emmerich, Acta Mater. 95, 343–356 (2015).10.1016/j.actamat.2015.05.052 ↗
5. S. Sahoo, K. Chou, Addit. Manuf. 9, 14–24 (2016).10.1016/j.addma.2015.12.005 ↗
6. S. Ghosh, L. Ma, N. Ofori-Opoku, and J.E. Guyer: Model. Simul. Mater. Sci. Eng., 2017, vol. 25 (6), art. no. 065002.10.1088/1361-651X/aa7369 ↗
7. S. Ghosh, L. Ma, L.E. Levine, R.E. Ricker, M.R. Stoudt, J.C. Heigel, J.E. Guyer, JOM 70(6), 1011–16 (2018).10.1007/s11837-018-2771-x ↗
8. C. Yang, Q. Xu, B. Liu, J. Mater. Sci. 53, 9755–9770 (2018).10.1007/s10853-018-2236-1 ↗
9. T. DebRoy, H.L. Wei, J.S. Zuback, T. Mukherjee, J.M. Elmer, J.O. Milewski, A.M. Beese, A. Wilson-Heid, A. De, W. Zhang, Prog. Mater Sci. 92, 112–224 (2018).10.1016/j.pmatsci.2017.10.001 ↗
10. T. Niendorf, F. Brenne, Mater. Charact. 85, 57–63 (2013).10.1016/j.matchar.2013.08.010 ↗
11. C. Haase, J. Bültmann, J. Hof, S. Ziegler, S. Bremen, C. Hinke, A. Schwedt, U. Prahl, and W. Bleck: Materials, 2017, vol. 10, art. no. 56.10.3390/ma10010056 ↗
12. F. Kies, P. Köhnen, M.B. Wilms, F. Brasche, K.G. Pradeep, A. Schwedt, S. Richter, A. Weisheit, H. Schleifenbaum, C. Haase, Mater. Des. 160, 1250–1264 (2018).10.1016/j.matdes.2018.10.051 ↗
13. K. Sato, M. Ichinose, Y. Hirotsu, Y. Inoue, ISIJ Int. 29, 868–877 (1989).10.2355/isijinternational.29.868 ↗
14. S. Allain, J.P. Chateau, O. Bouaziz, S. Migot, N. Guelton, Mater. Sci. Eng. A 387–389, 158–62 (2004).10.1016/j.msea.2004.01.059 ↗
15. A. Saeed-Akbari, L. Mosecker, A. Schwedt, W. Bleck, Metall. Mater. Trans. A 43A, 1688–1704 (2011).
16. J. Li, Z. Wang, Y. Wang, J. Wang, Acta Mater. 60, 1478–1493 (2012).10.1016/j.actamat.2011.11.037 ↗
17. D. Tourret, A. Karma, Acta Mater. 82, 64–83 (2015).10.1016/j.actamat.2014.08.049 ↗
18. D. Tourret, Y. Song, A.J. Clarke, A. Karma, Acta Mater. 122, 220–235 (2017).10.1016/j.actamat.2016.09.055 ↗
19. T. Takaki, S. Sakane, M. Ohno, Y. Shibuta, T. Shimokawabe, T. Aoki, Acta Mater. 118, 230–243 (2016).10.1016/j.actamat.2016.07.049 ↗
20. T. Takaki, M. Ohno, Y. Shibuta, S. Sakane, T. Shimokawabe, T. Aoki, J. Cryst. Growth 442(15), 14–24 (2016).10.1016/j.jcrysgro.2016.01.036 ↗
21. H.J. Diepers, D. Ma, I. Steinbach, J. Cryst. Growth 237–239, 149–153 (2002).10.1016/S0022-0248(01)01932-7 ↗
22. A. Viardin, M. Zaloznik, Y. Souhar, M. Apel, H. Combeau, Acta Mater. 122, 386–399 (2017).10.1016/j.actamat.2016.10.004 ↗
23. T. Keller, G. Lindwall, S. Ghosh, L. Ma, B.M. Lane, F. Zhang, U. Kattner, E. Lass, J. Heigel, Y. Idell, Acta Mater. 139, 244–253 (2017).10.1016/j.actamat.2017.05.003 ↗
24. W. Kurz and D.J. Fischer: Fundamentals of Solidification, Trans Tech Publications, Aedermansdorf, 1986.
25. J.D. Hunt, Cellular and primary dendrite spacings. in Proc. Int. Conf. on Solidification and Casting of Metal. The Metal Society, London, (1979), pp. 3–9.
26. B. Echebarria, R. Folch, A. Karma, and M. Plapp: Phys. Rev. E, 2004, vol. 70, art. no. 061604.10.1103/PhysRevE.70.061604 ↗
27. M. Plapp, J. Cryst. Growth 303(1), 49–57 (2007).10.1016/j.jcrysgro.2006.12.064 ↗
28. M. Ohno and K. Matsuura: Phys. Rev. E, 2009, vol. 79, art. no. 031603.10.1103/PhysRevE.79.031603 ↗
29. I. Steinbach, F. Pezzolla, Physica D 134, 385–393 (1999).10.1016/S0167-2789(99)00129-3 ↗
30. J. Eiken, B. Böttger, and I. Steinbach: Phys. Rev. E, 2006, vol. 73 (6), art. no. 066122.10.1103/PhysRevE.73.066122 ↗
31. S.G. Kim, W.T. Kim, T. Suzuki, M. Ode, J. Cryst. Growth 261, 135–158 (2004).10.1016/j.jcrysgro.2003.09.017 ↗
32. H.K. Kim, S.G. Kim, W. Dong, I. Steinbach, and B. Lee, Model. Simul. Mater. Sci. Eng., 2004, vol. 22, art. no. 034004.10.1088/0965-0393/22/3/034004 ↗
33. C. Beckermann, H. Diepers, I. Steinbach, A. Karma, X. Tong, J. Comp. Phys. 154, 468–496 (1999).10.1006/jcph.1999.6323 ↗
34. G.K. Bouse and J.R. Mihalisin, Metallurgy of investment cast superalloy components, in Superalloys Supercomposites Superceramics, J.K. Tien, T. Caulfield, eds., Academic Press, 1989, pp. 99–148.10.1016/B978-0-12-690845-9.50010-5 ↗
35. H.S. Whitewell, L. Li, R.A. Overfelt, Metall. Mater. Trans. B 31B, 546–51 (2000).10.1007/s11663-000-0162-4 ↗
36. D. Herzog, V. Seyda, E. Wycisk, C. Emmelmann, Acta. Mater. 117, 371–392 (2016).10.1016/j.actamat.2016.07.019 ↗
37. R. Acharya, J.A. Sharon, A. Staroselsky, Acta. Mater. 124, 360–371 (2017).10.1016/j.actamat.2016.11.018 ↗
38. R. Kobayashi, Physica D 63, 410–423 (1993).10.1016/0167-2789(93)90120-P ↗
39. W.J. Boettinger, J.A. Warren, C. Beckermann, A. Karma, Annu. Rev. Mater. Res. 32, 163–194 (2002).10.1146/annurev.matsci.32.101901.155803 ↗
40. J. Kundin, R. Siquieri, H. Emmerich, Physica D 243, 116–127 (2013).10.1016/j.physd.2012.10.004 ↗
41. J. Kundin, J.L. Rezende, H. Emmerich, Metal. Mater. Trans. A 45A(2), 1068 (2014).10.1007/s11661-013-1995-1 ↗
42. A. Karma, W.J. Rappel, Phys. Rev. E 57, 4323–4349 (1998).10.1103/PhysRevE.57.4323 ↗
43. B. Hallstedt, A.V. Khvan, B.B. Lindahl, M. Selleby, Sh Liu, CALPHAD: Computer Coupling of Phase Diagrams and Thermochemistry 56, 49–57 (2017)10.1016/j.calphad.2016.11.006 ↗
44. Thermo-Calc Software TCFE9 Steels/Fe-alloys Database. https://www.thermocalc.com/roducts-services/databases/thermodynamic/.
45. W. Kurz, R. Trivedi, Mater. Sci. Eng. A 179, 46–51 (1994).10.1016/0921-5093(94)90162-7 ↗