Effect of Melt Conditioning on Removal of Fe from Secondary Al-Si Alloys Containing Mg, Mn, and Cr
Source abstract
Abstract
Primary intermetallic sludge formation in hypoeutectic secondary Al7.1Si(1.5-xM)FexMM alloys was investigated in view of potential Fe removal by separation of sludge and Al melt. M is Mg, Mn, and Cr, with Mg as typical alloying element and Mn and Cr as additions to modify the sludge. Differential thermal analysis was used to determine the onset temperatures of sludge formation and solidification of the (Al)-solid solution. These temperatures were compared with results from the semi-empirical sludge factor approach and thermodynamic calculations. The chosen conditioning temperature of 620 °C is slightly above the onset temperature of solidification of the (Al)-solid solution in all alloys. At 620 °C, sludge did not form in alloys with xMg ≥ 0.6 at. pct. In all other alloys, sludge has formed. In the ternary Al7.1Si1.5Fe alloy and the alloy with xMg = 0.3 at. pct, the hexagonal αh phase is responsible for binding Fe, whereas Mg remains in the melt. The cubic αc phase binds Fe from the melt of Mn- and Cr-containing alloys. The (Al,Si)2Cr and Al13Cr4Si4 phases additionally bind Cr. The potential separation of the sludge from the residual melt leads to relative Fe removal up to 67 pct and relative transition-metal removal up to 65 and 83 pct.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (85)
Show source-provided references
1. J. A. Taylor: Mater. Sci. Forum, 2011, vol. 690, pp. 429-32.10.4028/www.scientific.net/MSF.690.429 ↗
2. L. Lu, A. K. Dahle: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 819-35.
3. T. O. Mbuya, B.O. Odera and S. P. Nganga: Int. J. Cast Metal. Res., 2003, vol. 16, pp. 451-65.10.1080/13640461.2003.11819622 ↗
4. X. Cao and J. Campbell: Mater. T. JIM., 2006, vol. 47, pp. 1303-12.10.2320/matertrans.47.1303 ↗
5. C. M. Dinnis, J. A. Taylor and A. K. Dahle: Mater. Sci. Eng. A, 2006, vol. 425A, pp. 286-96.10.1016/j.msea.2006.03.045 ↗
6. W. Khalifa, A. M. Samuel, F. H. Samuel, H. W. Doty and S. Valtierra: Int. J. Cast Metal. Res., 2006, vol. 19, pp. 156-66.10.1179/136404606225023372 ↗
7. L. Liu, A. M. A. Mohamed, A. M. Samuel, F. H. Samuel, H. W. Doty and S. Valtierra: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2457-69.10.1007/s11661-009-9944-8 ↗
8. J. A. Taylor: Procedia Mater. Sci., 2012, vol. 1, pp. 19-33.
9. S. Ferraro and G. Timelli: Metall. Mater. Trans. B, 2015, vol. 46B, pp. 1022-34.10.1007/s11663-014-0260-3 ↗
10. S. Ji, W. Yang, F. Gao, D. Watson and Z. Fan: Mater. Sci. Eng. A, 2013, vol. 564A, pp. 130-39.10.1016/j.msea.2012.11.095 ↗
11. S. Seifeddine, S. Johansson and I. L. Svensson: Mater. Sci. Eng. A, 2008, vol. 490A, pp. 385-90.10.1016/j.msea.2008.01.056 ↗
12. A. Bjurenstedt and S. Seifeddine, A. E. W. Jarfors: Metals, 2016, vol. 6, pp. 1-15.10.3390/met6120314 ↗
13. A. Fabrizi and G. Timelli: IOP Conf. Ser.: Mater. Sci. Eng., 2016, vol. 117, art. no. 012017, pp. 1–610.1088/1757-899X/117/1/012017 ↗
14. L. A. Narayanan, F. H. Samuel and J. E. Gruzleski: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1761-73.10.1007/BF02668540 ↗
15. B. Kim, S. Lee and H. Yasuda: Mater. Sci. Forum, 2010, vol. 654-56, pp. 974-77.10.4028/www.scientific.net/MSF.654-656.974 ↗
16. T. Gao, Y. Wu, C. Li and X. Liu: Mater. Lett., 2013, vol. 110, pp. 191-94.10.1016/j.matlet.2013.08.039 ↗
17. L B. Otani, J. Soyama, G. Zepon, A. C. e Silva, C. S. Kiminami, W. J. Botta and C. Bolfarini: J. Phase Equlib. Diffus., 2017, Vol. 38, pp. 298-304.10.1007/s11669-017-0542-y ↗
18. W. Eidhed: J. Mater. Sci. Technol., 2008, vol. 24, pp. 45-47.10.1179/174328407X248523 ↗
19. A. Fabrizi, S. Ferraro, G. Timelli, In: M. Tiryakioğlu, J. Campbell and G. Byczynski, editors: Shape casting 5: international symposium 2014, 1st ed., Wiley, Hoboken, 2014, pp. 277–84.
20. L. G. Hou, H. Cui, Y. H. Cai and J. S. Zhang: Mater. Sci. Eng. A, 2009, Vol. 527, pp. 85-92.10.1016/j.msea.2009.07.041 ↗
21. M. Wang, W. Xu and Q. Han: Mater. Trans., 2016, vol. 57, pp. 1509-13.10.2320/matertrans.M2015329 ↗
22. D. Ferdian, C. Josse, P. Nguyen, N. Gey, N. Ratel-Ramond, P. de Parseval, Y. Thebault, B. Malard, J. Lacaze and L. Salvo: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 2814-18.10.1007/s11661-015-2917-1 ↗
23. J. Y. Hwang, H. W. Doty and M. J. Kaufman: Philos. Mag., 2008, vol. 88, pp. 607-19.10.1080/14786430801942970 ↗
24. J. A. Taylor: 35th Australian Foundry Institute National Conference, 2004, pp. 1–10.
25. H. M. Van der Donk and G. H. Nijhof: U.S. Patent, 5741348, “Method for refining an aluminum scrap melt”, 1998, date of filing 28.5.1996, grant of the patent 21.4.1998.
26. H. L. de Moares, J. R. de Oliveira, D. C. R. Espinosa and J. A. S. Tenório: Mater. Trans., 2006, Vol 47, pp. 1731-36.10.2320/matertrans.47.1731 ↗
27. A. Pisch, C. Kräutlein, P. Le Brun, G. Rombach, P. de Vries, M. Ryckeboer and C.J. Simensen: Light Metals 2005, TMS., 2005, pp. 1191–95.
28. B.G. Dietrich, H. Becker, M. Smolka, A. Keßler, A. Leineweber, and G. Wolf: Adv. Eng. Mater., 2017, vol. 19, art. no. 1700161, pp. 1–7.10.1002/adem.201700161 ↗
29. A. Flores-V, M. Sukiennik, A. H. Castillejos-E., F. A. Acosta-G. and J. C. Escobedo-B.: Intermetallics, 1998, vol. 6, pp. 217-27.10.1016/S0966-9795(97)00073-3 ↗
30. P. Ashtari, K. Tetley-Gerard and K. Sadayappan: Can. Metall. Quart.,2012, vol. 51, pp. 75-80.10.1179/1879139511Y.0000000026 ↗
31. S. W. Kim, U. H. Im, H. C. Cha, S. H. Kim, J. E. Jang and K. Y. Kim: Ch. Foundry, 2013, vol. 10, pp. 112-17.
32. J. Gobrecht: Giesserei, 1975, vol. 62, pp. 263-66.
33. J. L. Jorstad: Die Cast Eng., 1986, vol. 30, pp. 30-36.
34. R. Dunn: Die Cast Eng. B, 1965, vol. 9B, pp. 8-30.
35. G. Timelli, S. Capuzzi and A. Fabrizi: J. Them. Anal. Calorim., 2016, vol. 123, pp. 249-62.10.1007/s10973-015-4952-y ↗
36. M.M. Makhlouf and D. Apelian: Casting Characteristics of aluminum die cast alloys, Work performed under contract No. DEFC07-99ID13716 prepared for US department of energy office of industrial technologies prepared by the advanced casting research center Worcester Polytechnic Institute, 2002, pp. 1–46.
37. S. G. Shabestari: Mater. Sci. Eng. A, 2004, vol. 383A, pp. 289-98.10.1016/S0921-5093(04)00832-9 ↗
38. L. Zhang, J. Gao, L. N. W. Damoah and D. G. Robertson: Mineral Processing & Extractive Metall. Rev., 2012, vol. 33, pp. 99-157.10.1080/08827508.2010.542211 ↗
39. S. Shankar and D. Apelian: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 465-76.10.1007/s11663-002-0057-7 ↗
40. G. Ghosh: Al-Fe-Si (Aluminium–Iron–Silicon), Landolt-Börnstein-Group IV Physical Chemistry 11A2, Light Metal Systems. Part 2. Springer, Berlin 2005, pp. 359–409.
41. V. Raghavan: J. Phase Equilib., 2009, vol. 30, pp. 184-88.10.1007/s11669-009-9486-1 ↗
42. Y. Du, J. C. Schuster, Z.-K. Liu, R. Hu, P. Nash, W. Sun, W. Zhang, J. Wang, L. Zhang, C. Tang, Z. Zhu, S. Liu, Y. Ouyang, W. Zhang and N. Krendelsberger: Intermetallics, 2008, vol. 16, pp. 554-70.10.1016/j.intermet.2008.01.003 ↗
43. Z.-K. Liu and Y. A. Chang: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1081-95.10.1007/s11661-999-0160-3 ↗
44. L. Eleno, J. Vezelý, B. Sundman, M. Cieslar and J. Lacaze: Mater. Sci. Forum, 2010, vol. 649, pp. 523-28.10.4028/www.scientific.net/MSF.649.523 ↗
45. H.-L. Chen, Q. Chen, Y. Du, J. Bratberg and A. Engström: Trans. Nonferrous Met. Soc. China, 2014, vol. 24, pp. 2041–53.10.1016/S1003-6326(14)63310-0 ↗
46. E. Balitchev, T. Jantzen, I. Hurtado and D. Neuschütz: Calphad, 2003, vol. 27, pp. 275–78.10.1016/j.calphad.2003.08.007 ↗
47. J. Lacaze, L. Eleno and B. Sundman: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2208-14.10.1007/s11661-010-0263-x ↗
48. N. A. Belov, D. G. Eskin and A. A. Aksenov: Multicomponent Phase Diagrams: Applications for Commercial Aluminium Alloys, 1st ed., Elsevier, Amsterdam, Heidelberg, 2005, pp. 47-82.10.1016/B978-008044537-3/50002-0 ↗
49. B. Hu, S. Qin, Y. Du, Z. Li and Q. Wang: J. Phase Equlib. Diffus., 2015, vol. 36, pp. 333-49.10.1007/s11669-015-0388-0 ↗
50. B. Hu, W.-W. Zhang, Y. Peng, Y. Du, S. Liu and Y. Zhan: Thermochimica Acta, 2013, vol. 561, pp. 77-90.10.1016/j.tca.2013.03.033 ↗
51. Y. Liang, C. Guo, C. Li and Z. Du: J. Phase Equlib. Diffus., 2009, vol. 30, pp. 462-79.10.1007/s11669-009-9572-4 ↗
52. D. Munson: J. Inst. Metals, 1967, vol. 95, pp. 217-19.
53. P. Orozco-González, M. Castro-Román, J. López-Cuevas, A. Hernández-Rodríguez, R. Muñiz-Valdez, S. Luna-Álvarez and C. Ortiz-Cuellar: Rev. metal., 2011, vol. 47, pp. 453-61.10.3989/revmetalm.1068 ↗
54. J. E. Tibballs, R. L. Davis and B. A. Parker: J. Mater. Sci., 1989, vol. 24, pp. 2177-82.10.1007/BF02385438 ↗
55. J. E. Tibballs, J. A. Horst and C. J. Simensen: J. Mater. Sci., 2001, vol. 36, pp. 937-41.10.1023/A:1004815621313 ↗
56. Z. Zhou, Z. Li, Y. Xie, X. Wang, Y. Liu, Z. Long and F. Yin: Int. J. Mater. Res., 2015, vol. 106, pp. 470-80.10.3139/146.111202 ↗
57. M. Cooper, K. Robinson: Acta Crystallogr., 1966, vol 20, pp. 614-1710.1107/S0365110X6600149X ↗
58. M. Cooper: Acta Crystallogr., 1967, vol. 23, pp. 1106-07.10.1107/S0365110X67004372 ↗
59. G. Phragmen: J. Inst. Met., 1950, vol. 77, pp. 489-552.
60. A. Bjurenstedt, D. Casari, S. Seifeddine and R. H. Mathiesen: Acta Mater., 2017, vol 130, pp. 1-9.10.1016/j.actamat.2017.03.026 ↗
61. H. Becker and A. Leineweber: Mater. Charact., 2018, vol. 141, pp. 406-411.10.1016/j.matchar.2018.05.013 ↗
62. S. Ferraro, A. Fabrizi and G. Timelli: Mater. Chem. Phys., 2015, vol. 153, pp. 168-79.10.1016/j.matchemphys.2014.12.050 ↗
63. X. Cao and J. Campbell: Metall. Mater. Trans. A, 2003, 34A, pp. 1409-20.10.1007/s11661-003-0253-3 ↗
64. W. Khalifa, F. H. Samuel, J. E. Gruzleski, H. W. Doty and S. Valtierra: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1017-32.10.1007/s11661-005-0295-9 ↗
65. D. N. Miller, L. Lu and A. K. Dahle: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 873-78.10.1007/BF02735008 ↗
66. P. Orozco-González, M. Castro-Román, S. Maldonado-Ruíz, S. Haro-Rodríguez, F. Equihua-Guillén, R. Muñiz-Valdez, S. Luna-Álvarez, M. Montoya-Dávila and A. Hernández-Rodríguez: J. Miner. Mater. Charact. Eng., 2015, vol. 3, pp. 15-25.
67. J. Roger, F. Bosselet and J. C. Viala: J. Solid State Chem., 2011, vol. 18, pp. 1120-28.10.1016/j.jssc.2011.03.025 ↗
68. V. Hansen, B. Hauback, M. Sundberg, C. Rømming and J. Gjønnes: Acta Crystallogr., 1998, vol. 54, pp. 351-57.10.1107/S0108768197017047 ↗
69. M. V. Kral, P. N. H. Nakashima and D. R. G. Mitchell: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1987-1997.10.1007/s11661-006-0141-8 ↗
70. J. Grin, U. Burkhardt and M. Ellner: Z. Kristallogr., 1994, vol. 209, pp. 479-87.10.1524/zkri.1994.209.6.479 ↗
71. V. Stefaniay, A. Griger and T. Turmezey: J. Mater. Sci., 1987, vol. 22, pp. 539-46.10.1007/BF01160766 ↗
72. H. Y. Kim, T. Y. Park, S. W. Han and H. M. Lee: J. Cryst. Growth, 2006, vol. 291, pp. 207-11.10.1016/j.jcrysgro.2006.02.006 ↗
73. T. Dasgupta, J. Etourneau, B. Chevalier, S. F. Matar and A. M. Umarji: J Appl. Phys., 2008, vol. 103, pp. 1-7.10.1063/1.2917347 ↗
74. L. F. Mondolfo: Aluminum alloys: structure and properties, London; Boston: Butterworth, 1976, pp.487-88.10.1016/B978-0-408-70932-3.50192-3 ↗
75. K. Robinson: Acta Crystallogr., 1953, vol. 6, p. 667.10.1107/S0365110X5300185X ↗
76. S. P. Gupta: Mater. Charact., 2004, vol. 52, pp. 355-70.10.1016/j.matchar.2004.06.010 ↗
77. K. Robinson: Acta. Crystallogr., 1953, vol. 6, pp. 854-59.10.1107/S0365110X53002490 ↗
78. H.-L. Chen, F. Weitzer, J. C. Schuster, Y. Du and H. Xu: J. Alloy. Compd., 2007, vol. 436, pp. 313-18.10.1016/j.jallcom.2006.07.038 ↗
79. M. J. Cooper: Acta Crystallogr., 1960, vol. 13, pp. 257-63.10.1107/S0365110X60000571 ↗
80. B. Cao and K. H. Kuo: J. Alloy. Compd., 2008, vol. 458, pp. 238-47.10.1016/j.jallcom.2007.04.022 ↗
81. H. L. Lukas, S. G. Fries and B. Sundman: Computational thermodynamics. The Calphad method, Cambridge University Press, Cambridge, 2007, pp. 1-324.10.1017/CBO9780511804137 ↗
82. TCAL4-TCS Al-based alloy database, Version 4.0 http://www.thermocalc.com/media/19847/dbd_tcal40_extended_info.pdf. Assessed 25 Feb 2018.
83. J. O. Andersson, T. Helander, L. Höglund, P. F. Shi and B. Sundman: Calphad, 2002, vol. 26, pp. 273-312.10.1016/S0364-5916(02)00037-8 ↗
84. D. Pavlyuchkov, B. Przepiórzyński, W.Kowalski, T. Y. Velikanova and B. Grushko: Calphad, 2014, vol. 45, pp. 194-203.10.1016/j.calphad.2013.12.007 ↗
85. T. Zienert and O. Fabrichnaya: Adv. Eng. Mater., 2013, vol. 15, pp. 1244-50.10.1002/adem.201300113 ↗