journal article·2018-08

Effects of CO and O2 Impurities on Supercritical CO2 Corrosion of Alloy 625

Jacob Mahaffey, Anthony Schroeder, David Adam, Andrew Brittan, Mark Anderson, Adrien Couet, Kumar Sridharan

Publisher page

Abstract

Corrosion of alloy 625 was investigated in three supercritical CO2 (sCO2) environments: research-grade (RG) (99.999 pct pure), RG + 100 ppm O2 (at.), and RG + 1 pct CO (at.). Samples were exposed to each condition for a total of 1000 hours at 750 °C and 20 MPa. Each sample was analyzed using mass change, scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), time-of-flight-secondary ion mass spectroscopy (TOF-SIMS), and Raman spectroscopy. Samples exposed to RG CO2 produced a compact uniform chromia layer. The samples exposed to oxygen-rich CO2 showed a less-uniform oxide with nodules characterized by Ni- and Fe-rich oxides on the surface with enhanced chromia formation beneath. The oxide grown in 1 pct CO exhibited the least protective oxide consisting of a duplex chromia scale with inner equiaxed grain structure and an outer porous layer. RG + 1 pct CO was the only environment in which carbon was observed throughout the oxide, although carbon enrichment was observed at the M-O interface of the oxides produced in RG and RG + 1 pct CO environments. A model for explaining carburization of chromium in sCO2 environments was produced by treating the oxide as a diffusion barrier and considering the chemical equilibrium of CO2 through the Cr2O3 phase.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. V. Dostal, M. Driscoll, and P. Hejzlar: Technical Report MIT-ANP-TR-100, 2004, pp. 1–317.
2. V. Dostal, M.J. Driscoll, P. Hejzlar, and Y. Wang: ASME Turbo Expo, Power for Land, Sea, and Air, 2004, vol. 7, pp. 683–92.10.1115/GT2004-54242 ↗
3. T. Neises, and C. Turchi: Energy Procedia, 2014, Vol. 49, pp.1187-1196.10.1016/j.egypro.2014.03.128 ↗
4. J. Gomez, M. Anderson, and A. Kruizenga: Degradation Mechanisms and Coatings for TES and HTF. Solar Energy Technologies Office, 2013, https://www.energy.gov/eere/solar/downloads/degradation-mechanisms-and-development-protective-coatings-tes-and-htf. Accessed 9 Jan 2016.
5. Y. Kato, T. Nitawaki, and Y. Muto: Nuclear Engineering and Design, 2003, Vol. 230, pp. 195-207.10.1016/j.nucengdes.2003.12.002 ↗
6. C. Oh, T. Lillo, W. Windes, T. Totemeier, B. Ward, and R. Barner: Idaho National Laboratories, Idaho Falls, Idaho, unpublished research, 2006.
7. Z. Ma, and C. Turchi: Supercritical CO 2 Power Cycle Symposium, Boulder, Colorado, March 2011, p. 4.
8. B. Pint, and J. Keiser: 4th International Symposium—Supercritical CO 2 Power Cycles, Pittsburgh, Pennsylvania, Sept 2014, pp. 1–13.
9. Haynes International, Haynes 625 Alloy. Haynes International, 2017, http://haynesintl.com/docs/default-source/pdfs/new-alloy-brochures/high-temperature-alloys/brochures/625-brochure.pdf?sfvrsn=14. Accessed April 2016.
10. H.L. Eiselstein, and D.J. Tillack: TMS, Proceedings of Superalloys 718, 625 and Various Derivatives, Pittsburgh, PA, 1991, pp. 1–14.10.7449/1991/Superalloys_1991_1_14 ↗
11. L.S. Mataveli, J. Cormier, D. Bertheau, P. Villechaise, A. Soula, Z. Hervier, and F. Hamon: Materials Science and Engineering A, 2016, vol. 650, pp. 161-170.10.1016/j.msea.2015.10.023 ↗
12. C. Vernot-Loier, and F. Cortial: TMS, Superalloys 718, 625 and Various Derivatives, Warrendale, PA, 1991, pp. 409–22.10.7449/1991/Superalloys_1991_409_422 ↗
13. F. Cortial, J.M. Corrieu, C. Vernot-Loier: Metall. Mater. Trans A, 1995, vol. 26A, pp. 73–1286.10.1007/BF02670621 ↗
14. X. Xing, X. Di, and B. Wang: Journal of Alloys and Compounds, 2014, vol. 593, pp. 110-116.10.1016/j.jallcom.2013.12.224 ↗
15. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: TMS, Superalloys 718, 625 and Various Derivatives, Warrendale, PA, 1991, pp. 367–78.
16. V. Shankar, K. Bhanu, S.L. Mannan: J. Nucl. Mater., 2001, vol. 288, pp. 222-232.10.1016/S0022-3115(00)00723-6 ↗
17. M. Sundararaman, L. Kumar, G. Prasad, P. Mukhopadhyay, and S. Banerjee: Metall. Mater. Trans A, 1999, vol. 30, pp. 41–52.10.1007/s11661-999-0194-6 ↗
18. M. Sundararaman, P. Mukhopadhyay, S. Banerjee: TMS, Proceedings of Superalloys 718, 625, 706 and Derivatives, Pittsburgh, PA, 2001, pp. 367–78.10.7449/2001/Superalloys_2001_367_378 ↗
19. S. Floreen, G.E. Fuchs, and W.J. Yang: TMS, Superalloys 718, 625, 706, and Various Derivatives, Warrendale, PA, 1994, pp. 13–38.10.7449/1994/Superalloys_1994_13_37 ↗
20. K. Murty, M. D. Mathew: Nuclear Engineering and Design, 2004, vol. 228(1-3), pp. 3-13.10.1016/j.nucengdes.2003.06.006 ↗
21. L. Latu-Romain, Y. Parsa, S. Mathieu, M. Vilasi, M. Ollivier, A. Galerie, and Y. Wouters: Oxidation of Metals, 2016, vol. 86(5), pp. 1–13.
22. X. Ledoux, S. Mathieu, M. Vilasi, Y. Wouters, and M. Wagner: Oxidation of Metals, 2013, vol. 80, pp. 25-35.10.1007/s11085-013-9367-1 ↗
23. J. Mahaffey, D. Adam, and A. Kalra: EPRI International Conference on Corrosion in Power Plants, San Diego, CA, 2015, pp. 1–30.
24. J. Mahaffey, D. Adam, A. Brittan, M. Anderson, and K. Sridharan: Oxidation of Metals, 2016, vol. 86(5), pp. 567–580.10.1007/s11085-016-9654-8 ↗
25. H. Lee, G. Subramanian, S. Kim, and C. Jang: Corrosion Science, 2016, vol. 111, pp. 649–658.10.1016/j.corsci.2016.06.004 ↗
26. F. Rouillard, and T. Furukawa: Corrosion Science, 2016, vol. 105, pp. 120-132.10.1016/j.corsci.2016.01.009 ↗
27. P. Kofstad and K. P. Lillerud: Journal of the Electrochemical Society, 1980, vol. 127(11), pp. 2397-2410.10.1149/1.2129481 ↗
28. T. Gheno, D. Monceau, J. Zhang, and D. Young: Corrosion Science, 2011, vol. 53(9), pp. 2767–2777.10.1016/j.corsci.2011.05.013 ↗
29. I. Wolf, and H. Grabke: Solid State Communications, 1985, vol. 54, pp. 5-10.10.1016/0038-1098(85)91021-X ↗
30. L. Garcia-Fresnillo, A. Chyrkin, C. Böhme, J. Barnikel, F. Schmitz, and W. Quadakkers: Journal of Materials Science, 2014, vol. 49(17), pp. 6127-6142.10.1007/s10853-014-8344-7 ↗
31. D. Holmes, R. Hill, and L. Wyatt: British Nuclear Energy Society, Reading University, Reading, 1974.
32. V. Dheeradhada, A. Thatte, M. Karadge, and M. Drobnjak: EPRI International Conference on Corrosion in Power Plants, San Diego, CA, 2015.
33. W. Quadakkers, and H. Schuster: Werkstoffe und Korrosion, 1985, vol. 36, pp. 141-150.10.1002/maco.19850360402 ↗
34. W. Quadakkers: Werkstoffe und Korrosion, 1985, vol. 36, pp. 335-347.10.1002/maco.19850360802 ↗
35. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: TMS, Superalloys 718, 625, 706, and Various Derivatives, 1997, pp. 625–706.
36. Special Metals Corporation, Inconel Alloy 625, Special Metals Corporation, 2013. http://www.specialmetals.com/assets/smc/documents/alloys/inconel/inconel-alloy-625.pdf. Accessed April 2016.
37. A. Chyrkin, P. Huczkowski, V. Shemet, L. Singheiser, and W. Quadakkers: Oxidation of Metals, 2011, vol 75(3), pp. 143-166.10.1007/s11085-010-9225-3 ↗
38. L. Malgorzata, and R. Riman: Chemistry of Materials, 1993, vol. 5, pp. 61–70.10.1021/cm00025a014 ↗
39. C. T. Fujii and R. A. Meussner: Journal of the Electrochemical Society, 1967, vol. 114(5), pp. 435-442.10.1149/1.2426622 ↗
40. D.J. Young, J. Zhang, C. Geers, and M. Schutze: Materials and Corrosion, 2011, vol 62(1), pp. 7-28.10.1002/maco.201005675 ↗
41. M. Hansel, C. A. Boddington, and D. J. Young: Corrosion Science, 2003, vol 45(5), pp. 967-981.10.1016/S0010-938X(02)00182-8 ↗
42. Z. Albertsen, O. Grong, J. C. Walmsley, R.H. Mayhiesen, and W. VanBeek: Metall. Mater. Trans. A, 2008, vol. 39, pp. 1258–76.10.1007/s11661-008-9494-5 ↗