Microstructure and Texture Evolution during Single- and Multiple-Pass Friction Stir Processing of Heat-Treatable Aluminum Alloy 2024
Source abstract
Abstract
Microstructure and crystallographic texture evolution during single- and multiple-pass friction stir processing (FSP) of an age-hardenable aluminum alloy 2024 (Al-Cu-Mg) was investigated. Multiple-pass experiments were carried out using two different processing strategies, multi-pass FSP, and multi-track FSP. Effect of a post-FSP heat treatment above and below the solutionizing temperature of the alloy was also studied. FSP experiments were carried out using an optimal set of parameters. Characterization tools used in the study include scanning electron microscopy (SEM), electron back-scattered diffraction (EBSD), electron probe micro-analyser (EPMA), and X-ray diffraction (XRD). Microstructural features indicate the occurrence of particle stimulated nucleation (PSN) assisted dynamic recrystallization (DRX) as the dominant microstructural evolution mechanism in the nugget zone. Geometrical coalescence occurred, leading to the formation of some larger grains in the nugget zone. Heterogenous micro-texture distribution was observed in the nugget zone with the bulk textures consisting of FCC shear texture components dominated by A (1)*/A (2)* and C. Microstructure and texture in the nugget zone remained stable after both routes of multiple-pass processing, demonstrating the possibility of FSP to produce bulk volume of fine-grained materials. Post-FSP heat treatment indicated the stability of microstructure and texture up to 723 K (450 A degrees C) owing to relatively lower strain energies retained after FSP.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. E.A. Starke Jr. and J.T. Staley: Progress in Aerospace Science, 1996, vol. 32, pp. 131–172.10.1016/0376-0421(95)00004-6 ↗
2. J.C. Williams and E.A. Starke: Acta Materialia, 2003, vol. 51, pp.5775–5799.10.1016/j.actamat.2003.08.023 ↗
3. F. Tariq, N. Naz, and R.A. Baloch: Journal of Non-destructive Evaluation, 2012, vol. 31 (1), pp. 17–33.10.1007/s10921-011-0117-5 ↗
4. R.Z. Valiev, A. V. Korznikov, and R. R. Mulyukov: Materials Science and Engineering: A, 1993, vol. 168(2), pp. 141–48.10.1016/0921-5093(93)90717-S ↗
5. A. Azushima, R. Kopp, A. Korhonen, D. Y. Yang, F. Micari, G. D. Lahoti, and P. Groche: CIRP Annals-Manufacturing Technology, 2008, vol. 57(2), pp. 716–735.10.1016/j.cirp.2008.09.005 ↗
6. A. Krishnaiah, U. Chakkingal, and P. Venugopal: Scripta Materialia, 2005, vol. 52 (12), pp. 1229–1233.10.1016/j.scriptamat.2005.03.001 ↗
7. T.G. Langdon: Acta Materialia, 2013, vol. 61 (19), pp. 7035–7059.10.1016/j.actamat.2013.08.018 ↗
8. S. Biswas, S.S. Dhinwal, and S. Suwas: Acta Materialia, 2010, vol. 58(9), pp. 3247–3261.10.1016/j.actamat.2010.01.051 ↗
9. P. Venkatachalam, S. Roy, V. T. Paul, M. Vijayalakshmi, B. Ravisankar, S. Suwas: Materials Science Forum, Vols. 702–703, pp. 113–18.10.4028/www.scientific.net/MSF.702-703.113 ↗
10. L.S. Tóth, R.A. Massion, L. Germain, S. C. Baik, and S. Suwas. Acta Materialia, 2004, vol. 52(7), pp. 1885–1898.10.1016/j.actamat.2003.12.027 ↗
11. T. Mungole, N. Nadammal, K. Dawra, P. Kumar, M. Kawasaki, and T.G. Langdon: Journal of Materials Science, 2013, vol. 48(13), pp. 4671–4680.10.1007/s10853-012-7061-3 ↗
12. T. Mungole, P. Kumar, M. Kawasaki and T.G. Langdon: Journal of Materials Research, 2014, vol. 29, pp. 2534–2546.10.1557/jmr.2014.272 ↗
13. W. Skrotzki, N. Scheerbaum, C. G. Oertel, H.G. Brokmeier, S. Suwas, and L.S. Tóth: Materials Science Forum, 2006, Trans Tech Publications, vol. 503, pp. 99–10610.4028/www.scientific.net/MSF.503-504.99 ↗
14. S. Roy, B. R. Nataraj, S. Suwas, S. Kumar, and K. Chattopadhyay: Journal of Materials Science, 2012, vol. 47(17), pp. 6402–6419.10.1007/s10853-012-6567-z ↗
15. K.S. Suresh, S. Sinha, A. Chaudhary, and S. Suwas: Materials Characterization, 2012, vol. 70, pp. 74-82.10.1016/j.matchar.2012.04.017 ↗
16. R. S. Mishra, M. W. Mahoney, S. X. McFadden, N. A. Mara, A.K. Mukherjee: Scripta Materialia, 2000, vol. 42, pp. 163–168.10.1016/S1359-6462(99)00329-2 ↗
17. N. Nadammal, S.V. Kailas, and S. Suwas: Materials & Design, 2015, vol. 65, pp. 127–13810.1016/j.matdes.2014.09.005 ↗
18. M.A. Sutton, B. Yang, A. P. Reynolds, and R. Taylor: Materials science and engineering: A, 2002, 323(1), pp. 160–166.10.1016/S0921-5093(01)01358-2 ↗
19. I. Charit and R.S. Mishra: Materials Science and Engineering: A, 2003, vol. 359(1), pp. 290–296.10.1016/S0921-5093(03)00367-8 ↗
20. H. Aydin, A. Bayram, A. Uguz, and K. S. Akay (2009) Materials & Design, vol. 30(6): 2211–2221.10.1016/j.matdes.2008.08.034 ↗
21. J. Q. Su, T. W. Nelson, and C. J. Sterling: Scripta Materialia, 2005, vol. 52(2), pp. 135 -140.10.1016/j.scriptamat.2004.09.014 ↗
22. R.W. Fonda, K. E. Knipling, and D. J. Rowenhorst: JOM, 2014, vol.66 (1), pp. 149–155.10.1007/s11837-013-0802-1 ↗
23. James C. M Li (ed.): Mechanical Properties of Nanocrystalline Materials, 2011, CRC Press: Boca Raton, p. 140.
24. A. Arora, Z. Zhang, A. De, and T. DebRoy: Scripta Materialia, 2009, vol. 61(9), pp. 863-866.10.1016/j.scriptamat.2009.07.015 ↗
25. Z. Hu, S. Yuan, X. Wang, G. Liu, and Y. Huang: Materials and Design, 2011, vol. 32(10), pp. 5055–5060.10.1016/j.matdes.2011.05.035 ↗
26. W. Xu, J. Liu, G. Luan, and C. Dong: Materials and Design, 2009, vol. 30(6), pp. 1886–1893.10.1016/j.matdes.2008.09.021 ↗
27. K. Oh-ishi, A.P. Zhilyaev, and T.R. McNelley: Metallurgical and Materials Transactions A, 2005, vol. 37A, 2239–2251.
28. A. Rollett, F.J. Humphreys, G.S. Rohrer, M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier, 2004.10.1016/B978-008044164-1/50016-5 ↗
29. J.E Burke, D. Turnbull, Progress in Materials Physics, 1952, 3, 220–292.10.1016/0502-8205(52)90009-9 ↗
30. J.P Nielsen, ASM Seminar Series, American Society for Metals, Metals Park, Ohio, 1966.
31. N. Nadammal, S.V. Kailas, J.A. Szpunar, and S. Suwas: Metallurgical and Materials Transactions A, 2015, vol. 46A, pp. 2823–2828.10.1007/s11661-015-2902-8 ↗
32. H.J. McQueen and W. Blum: Materials Science and Engineering A, 2000, vol. 290, pp. 95–107.10.1016/S0921-5093(00)00933-3 ↗
33. H.J. McQueen: Materials Science and Engineering A, 2004, vol. 387–389, pp. 203–208.10.1016/j.msea.2004.01.064 ↗
34. S. Gourdet and F. Montheillet: Acta Materialia, 2003, vol. 51, pp. 2685–2699.10.1016/S1359-6454(03)00078-8 ↗
35. F.J. Humphreys: Acta Metallurgica, 1977, vol. 25(11), pp.1323–1344.10.1016/0001-6160(77)90109-2 ↗
36. R.W. Fonda, J.F. Bingert, K.J. Colligan: Scripta Materialia, vol. 51, 2004, pp. 243-248.10.1016/j.scriptamat.2004.04.017 ↗
37. F. Montheillet, M. Cohen, and J. J. Jonas: Acta Metallurgica, 1984, vol. 32(11), pp. 2077–2089.10.1016/0001-6160(84)90187-1 ↗
38. F. Montheillet, P. Gilormini, and J. J. Jonas: Acta Metallurgica, 1985, vol. 33(4), pp. 705–717.10.1016/0001-6160(85)90035-5 ↗
39. G.R. Canova, U. F. Kocks, and J. J. Jonas: Acta Metallurgica, 1984, vol. 32(2), pp. 211–226.10.1016/0001-6160(84)90050-6 ↗
40. W. Cai, J. Mabon and P. Bellon: Wear, 2009, vol. 267, pp. 485–494.10.1016/j.wear.2008.11.016 ↗
41. Y.S. Sato, H. Kokawa, K. Ikeda, M. Enomoto, T. Hashimoto, and S. Jogan: Metallurgical and Materials Transactions A, 2001, vol. 32(4), pp. 941-948.10.1007/s11661-001-0351-z ↗
42. D.P. Field, T.W. Nelson, Y. Hovanski, and K.V. Jata: Metallurgical and Materials Transactions A, 2001, vol. 32A (11), pp. 2869-2877.10.1007/s11661-001-1037-2 ↗
43. R. Brown, W. Tang and A.P. Reynolds: Materials Science and Engineering A, 2009, vol. 513, pp. 115–121.10.1016/j.msea.2009.01.041 ↗
44. K.N. Ramesh, S. Pradeep and V. Pancholi: Metallurgical and Materials Transactions A, 2012, vol. 43A, pp. 4311–4319.10.1007/s11661-012-1232-3 ↗
45. 45. V. Dixit, R. S. Mishra, R. J. Lederich, and R. Talwar: Science and Technology of Welding and Joining, 2007, vol. 12(4), pp. 334–340.10.1179/174329307X197593 ↗
46. R.E. Reed-Hill: Physical Metallurgy Principles, Second Edition, D. Van Nostrand Company, New York 1973, pp. 302-303.
47. H. Aydin, A. Bayram, and I. Durgun: Materials and Design, 2010, vol. 31, pp. 2568–2577.10.1016/j.matdes.2009.11.030 ↗
48. J. Gubicza, S.V. Dobatkin, E. Khosravi, A.A. Kuznetsov, and J.L. Lábár: Mater. Sci. Eng: A, 2011, vol. 528(3), pp. 1828–32.10.1016/j.msea.2010.11.026 ↗