journal article·2017-09

Bauschinger Effect and Back Stress in Gradient Cu-Ge Alloy

Xianzhi Hu, Shenbao Jin, Hao Zhou, Zhe Yin, Jian Yang, Yulan Gong, Yuntian Zhu, Gang Sha, Xinkun Zhu

Publisher page

Abstract

Using surface mechanical attrition treatment (SMAT), a gradient structure composed of two gradient structure (GS) layers and a coarse grain (CG) layer was generated from a Cu-5.7 wt pct Ge alloy, significantly improving the yield strength of the sample. Unloading–reloading tests showed an unusual Bauschinger effect in these GS samples. The back stresses caused by the accumulated geometrically necessary dislocations (GNDs) on the GS/CG border increased with increasing strain. As found by electron backscatter diffraction (EBSD), the GNDs are mainly distributed in the gradient structured layer, and the density of the GNDs increase with increasing SMAT time. The effect of the back stress increased with increasing SMAT processing time due to the increase in the strain gradient. The pronounced Bauschinger effect in a GS sample can improve the resistance to forward plastic flow and finally contributes to the high strength of GS samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Surface Treatment and Residual Stress · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. K. Lu: Science 2014, vol. 345, pp. 1455–66.10.1126/science.1255940 ↗
2. T.H. Fang, W.L. Li, N.R. Tao and K. Lu: Science 2011, vol. 331, pp. 1587–90.10.1126/science.1200177 ↗
3. X.L. Wu, M.X. Yang, F.P. Yuan, L. Chen and Y.T. Zhu: Acta Mater. 2016, vol. 112, pp. 337–46.10.1016/j.actamat.2016.04.045 ↗
4. Q. Wang, Y. Yang, H. Jiang, C.T. Liu, H.H. Ruan and J. Lu, Sci. Rep. 2014, vol. 4, p. 4757.10.1038/srep04757 ↗
5. T.H. Fang, N.R. Tao and K. Lu: Scripta Mater. 2014, vol. 77, pp. 17–20.10.1016/j.scriptamat.2014.01.006 ↗
6. Y. Wei, Y. Li, L. Zhu, Y. Liu, X. Lei, G. Wang, Y. Wu, Z. Mi, J. Liu, H. Wang and H. Gao: Nat. Commun., 2014, vol. 5, p. 3580.10.1038/ncomms4580 ↗
7. K.M. Youssef, R.O. Scattergood, K.L. Murty, A.J. Horton and C.C. Koch: Appl. Phys. Lett., 2005, vol. 87, p. 091904.10.1063/1.2034122 ↗
8. X.L. Wu, P. Jiang, L. Chen, F. Yuan and Y.T. Zhu: Proc. Natl. Acad. Sci. USA., 2014, vol. 111, pp. 7197–01.10.1073/pnas.1324069111 ↗
9. X.L. Wu, P. Jiang, L. Chen, J.F. Zhang, F.P. Yuan and Y.T. Zhu: Mat. Res. Lett., 2014, vol. 2, pp. 185–91.10.1080/21663831.2014.935821 ↗
10. K. Lu and J. Lu: Mater. Sci. Eng. A., 2004, vol. 375-377, pp. 38–45.10.1016/j.msea.2003.10.261 ↗
11. X. L. Wu, M. Yang, F. Yuan, G. Wu, Y. Wei, X. Huang and Y. Zhu: Proc. Natl. Acad. Sci. USA., 2015, vol. 112, pp. 14501–15.10.1073/pnas.1517193112 ↗
12. Y. Xiang and J.J. Vlassak: Scripta Mater., 2005, vol. 53, pp. 177–82.10.1016/j.scriptamat.2005.03.048 ↗
13. Y. Xiang and J.J Vlassak: Acta Mater., 2006, vol. 54, pp. 5449–60.10.1016/j.actamat.2006.06.059 ↗
14. J. Rajagopalan, J.H. Han and M.T.A. Saif: Scripta Mater., 2008, vol. 59, pp. 734–37.10.1016/j.scriptamat.2008.06.010 ↗
15. J. Rajagopalan, C. Rentenberger, H.P.Karnthaler, G. Dehm and M.T.A. Saif: Acta Mater., 2010, vol. 58, pp. 4772–82.10.1016/j.actamat.2010.05.013 ↗
16. S-W. Lee, A.T. Jennings and J.R. Greer: Acta Mater., 2013, vol. 61, pp. 1872–85.10.1016/j.actamat.2012.12.008 ↗
17. D. Zhu, H. Zhang and D. Y. Li: Metall. Trans A., 2013, vol. 44, pp. 4207–17.10.1007/s11661-013-1752-5 ↗
18. X. Feaugas: Acta Mater., 1999, vol. 47, pp. 3617–32.10.1016/S1359-6454(99)00222-0 ↗
19. D. Kuhlmann-Wilsdorf and C. Laird: Mat. Sci. Eng., 1979, vol. 37, pp. 111–20.10.1016/0025-5416(79)90074-0 ↗
20. H.R. Pak, J. Chu, M. Kato and D.P. Pope: Mat. Sci. Eng., 1988, vol. 100, pp. 31–36.10.1016/0025-5416(88)90236-4 ↗
21. V. Kafka and D. Vokoun: Int. J. Plast., 2005, vol. 21, pp. 1461–80.10.1016/j.ijplas.2004.07.003 ↗
22. E.D. Hintsala, A.J. Wagner, W.W. Gerberich and K.A. Mkhoyan: Scripta Mater. 2016, vol. 114, pp. 51–55.10.1016/j.scriptamat.2015.12.004 ↗
23. C.J. Bayley, W.A.M. Brekelmans and M.G.D. Geers: Int. J. Solids Struct., 2006, vol. 43, pp. 7268–86.10.1016/j.ijsolstr.2006.05.011 ↗
24. E. Kröner, Int. J. Eng. Sci., 1963, vol. 1, pp. 261–62.10.1016/0020-7225(63)90037-5 ↗
25. J.F Nye: Acta Metall., 1953, vol. 1, pp. 153–62.10.1016/0001-6160(53)90054-6 ↗
26. M.F. Ashby: Phil. Mag., 1970, vol. 21, pp. 399–24.10.1080/14786437008238426 ↗
27. X. Ma, C. Huang, J. Moering, M. Ruppert, H.W. Höppel, M. Göken, J. Narayan and Y. Zhu: Acta Mat., 2016, vol. 116, pp. 43–52.10.1016/j.actamat.2016.06.023 ↗
28. M. Calcagnotto, D. Ponge, E. Demir and D. Raabe: Mater. Sci. Eng. A: 2010, vol. 527, pp. 2738–46.10.1016/j.msea.2010.01.004 ↗
29. H. Gao, Y. Huang, W.D. Nix and J.W. Hutchinson: J. Mech. Phys. Solids., 1999, vol. 47, pp. 1239–63.10.1016/S0022-5096(98)00103-3 ↗
30. M. Yang, Y. Pan, F. Yuan, Y. Zhu and X. Wu: Mater. Res. Lett., 2016, vol. 4, pp. 1–7.10.1080/21663831.2016.1153004 ↗
31. A. Rohatgi, K.S. Vecchio and G.T. Gray: MMTA, 2001, vol. 32, pp. 135–45.10.1007/s11661-001-0109-7 ↗
32. F. Hamdi and S. Asgari: Scripta Mater., 2010, vol. 62, pp. 693–96.10.1016/j.scriptamat.2010.01.031 ↗
33. U.F. Kocks and H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171–73.10.1016/S0079-6425(02)00003-8 ↗
34. A. Vinogradov: Adv. Eng. Mater., 2015, vol. 17, pp. 1710–22.10.1002/adem.201500177 ↗