Austenite Grain Growth in a 2.25Cr-1Mo Vanadium-Free Steel Accounting for Zener Pinning and Solute Drag: Experimental Study and Modeling
Source abstract
Abstract
Austenite grain size has been experimentally determined for various austenitization temperatures and times in a 2.25Cr-1Mo vanadium-free steel. Three grain growth regimes were highlighted: limited growth occurs at lower temperatures [1193 K (920 °C) and 1243 K (970 °C)]; parabolic growth prevails at higher temperatures [1343 K (1070 °C) and 1393 K (1120 °C)]. At the intermediate temperature of 1293 K (1020 °C), slowed down growth was observed. Classical grain growth equations were applied to the experimental results, accounting for Zener pinning and solute drag as possible causes for temperature-dependent limited growth. It was shown that Zener pinning due to AlN particles could not be responsible for limited growth, although it has some effect at lower temperatures. Instead, limited and slow growths are very likely to be the result of segregation of molybdenum atoms at austenite grain boundaries. The temperature-dependence of this phenomenon may be linked to the co-segregation of molybdenum and carbon atoms.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Y. Murakami, T. Nomura, and J. Watanabe: Application of 21/4Cr-1Mo Steel for Thick-Wall Pressure Vessels, ASTM, Denver, CO, 1982, pp. 383–417.10.1520/STP28425S ↗
2. D.T. Blagoeva, L. Debarberis, M. Jong, and P. ten Pierick: Int. J. Press. Vessels Pip., 2014, vol. 122, pp. 1–5.10.1016/j.ijpvp.2014.06.001 ↗
3. R.L. Klueh: Nucl. Eng. Des., 1982, vol. 72, pp. 329–44.10.1016/0029-5493(82)90047-4 ↗
4. J. Orr, F.R. Beckitt, and G.D. Fawkes: Ferritic Steels for Fast Reactor Steam Generators, British Nuclear Energy Society, London, 1978, pp. 91–109.
5. T. Wada and G.T. Eldis: Application of 21/4Cr-1Mo Steel for Thick-Wall Pressure Vessels, ASTM, Denver, CO, 1982, pp. 343–61.10.1520/STP28423S ↗
6. S. Suresh, G.F. Zamiski, and R.O. Ritchie: Application of 21/4Cr-1Mo Steel for Thick-Wall Pressure Vessels, ASTM, Denver, CO, 1982, pp. 49–67.10.1520/STP28409S ↗
7. M. Pelletier: Study of Structural Transformations Occurring in Low Carbon Chromium-Molybdenum Ferritic Steels: Influence of Small Additions of Vanadium And Molybdenum. Ph.D. Dissertation, Paris-Sud University, Orsay, 1981.
8. S. Sato, S. Matsui, T. Enami, and T. Tobe: Application of 21/4Cr-1Mo Steel for Thick-Wall Pressure Vessels, ASTM, Denver, CO, 1982, pp. 363–83.10.1520/STP28424S ↗
9. S. Dépinoy: Microstructural Evolution of a 2.25Cr-1Mo Steel During Austenitization and Temper: Austenite Grain Growth, Carbide Precipitation Sequence and Effects on Mechanical Properties. Ph.D. Dissertation, ENSMP, Paris, 2015.
10. H.J. Chang and J.J. Kai: Scripta Metall. Mater., 1990, vol. 24, pp. 2101–6.10.1016/0956-716X(90)90493-Z ↗
11. E. Bouyne: Propagation et arrêt de fissure de clivage dans l’acier 21/4Cr-1 Mo. Ph.D. Dissertation, ENSMP, Paris, 1999.
12. S.A. Khan and M.A. Islam: J. Mater. Eng. Perform., 2007, vol. 16, pp. 80–5.10.1007/s11665-006-9012-0 ↗
13. R.A. Swift: Application of 21/4Cr-1Mo Steel for Thick-Wall Pressure Vessels, ASTM, Denver, CO, 1982, pp. 166–89.10.1520/STP28415S ↗
14. R.G. Ding, T.S. Rong, and J.F. Knott: Mater. Sci. Technol., 2005, vol. 21, pp. 85–92.10.1179/174328405X16252 ↗
15. T. Ishiguro, Y. Murakami, K. Ohnishi, and J. Watanabe: Application of 21/4Cr-1Mo Steel for Thick-Wall Pressure Vessels, ASTM, Denver, CO, 1982, pp. 129–47.10.1520/STP28413S ↗
16. H.C.D. Nieuwland, S. Kawaguchi, H. Tsukada, K. Suzuki, I. Sato, J. Taira, and M. Kusuhashi: Nucl. Eng. Des., 1985, vol. 84, pp. 123–46.10.1016/0029-5493(85)90184-0 ↗
17. R.L. Bodnar, T. Ohhashi, and R.I. Jaffee: Metall. Trans. A, 1989, vol. 20, pp. 1445–60.10.1007/BF02665502 ↗
18. R.M. Miranda and M.A. Fortes: Mater. Sci. Eng. A, 1989, vol. 108, pp. 1–8.10.1016/0921-5093(89)90399-7 ↗
19. S. Sista, Z. Yang, and T. Debroy: Metall. Mater. Trans. B, 2000, vol. 31, pp. 529–36.10.1007/s11663-000-0158-0 ↗
20. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, 2004, pp. 91–119.10.1016/B978-008044164-1/50008-6 ↗
21. H. Pous-Romero, I. Lonardelli, D. Cogswell, and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 2013, vol. 567, pp. 72–9.10.1016/j.msea.2013.01.005 ↗
22. M. Maalekian, R. Radis, M. Militzer, A. Moreau, and W.J. Poole: Acta Mater., 2012, vol. 60, pp. 1015–26.10.1016/j.actamat.2011.11.016 ↗
23. M. Rath and E. Kozeschnik: Mater. Sci. Forum, 2013, vol. 753, pp. 357–60.10.4028/www.scientific.net/MSF.753.357 ↗
24. K. Banerjee, M. Militzer, M. Perez, and X. Wang: Metall. Mater. Trans. A, 2010, vol. 41, pp. 3161–72.10.1007/s11661-010-0376-2 ↗
25. C.S. Smith: Trans. Metall. Soc. AIME, 1948, vol. 175, pp. 15–51.
26. P.A. Manohar, M. Ferry, and T. Chandra: ISIJ Int., 1998, vol. 38, pp. 913–24.10.2355/isijinternational.38.913 ↗
27. S.F. Medina, M. Gómez, and P.P. Gómez: J. Mater. Sci., 2010, vol. 45, pp. 5553–7.10.1007/s10853-010-4616-z ↗
28. M. Militzer, E.B. Hawbolt, T. Ray Meadowcroft, and A. Giumelli: Metall. Mater. Trans. A, 1996, vol. 27, pp. 3399–409.10.1007/BF02595433 ↗
29. S. Maropoulos, S. Karagiannis, and N. Ridley: J. Mater. Sci., 2007, vol. 42, pp. 1309–20.10.1007/s10853-006-1191-4 ↗
30. J. Svoboda, F.D. Fischer, P. Fratzl, and E. Kozeschnik: Mater. Sci. Eng. A, 2004, vol. 385, pp. 166–74.
31. F.G. Wilson and T. Gladman: Int. Mater. Rev., 1988, vol. 33, pp. 221–6.10.1179/imr.1988.33.1.221 ↗
32. S.P. Ringer, W.B. Li, and K.E. Easterling: Acta Metall., 1989, vol. 37, pp. 831–41.10.1016/0001-6160(89)90010-2 ↗
33. J.W. Cahn: Acta Metall., 1962, vol. 10, pp. 789–98.10.1016/0001-6160(62)90092-5 ↗
34. M. Bouet: The Effect of Molybdenum in Silicon-Manganese-Niobium TRIP Steels. Ph.D. Dissertation, McGill University, Montreal, 2000.
35. M. Enomoto, N. Maruyama, K.M. Wu, and T. Tarui: Mater. Sci. Eng. A, 2003, vol. 343, pp. 151–7.10.1016/S0921-5093(02)00375-1 ↗
36. N. Maruyama, G.D.W. Smith, and A. Cerezo: Mater. Sci. Eng. A, 2003, vol. 353, pp. 126–32.10.1016/S0921-5093(02)00678-0 ↗
37. H.A. Fletcher, A.J. Garratt-Reed, H.I. Aaronson, G.R. Purdy, W.T. Reynolds Jr., and G.D.W. Smith: Scripta Mater., 2001, vol. 45, pp. 561–7.10.1016/S1359-6462(01)01060-0 ↗
38. S.H. Song, R.G. Faulkner, and P.E.J. Flewitt: Mater. Sci. Eng. A, 2000, vol. 281, pp. 23–7.10.1016/S0921-5093(99)00735-2 ↗
39. J.L. Ham: Trans. Am. Soc. Met., 1945, vol. 35, pp. 331–61.
40. M. Enomoto, C.L. White, and H.I. Aaronson: Metall. Trans. A, 1988, vol. 19, pp. 1807–18.10.1007/BF02645149 ↗
41. M. Guttmann, P. Dumoulin, and M. Wayman: Metall. Trans. A, 1982, vol. 13, pp. 1693–711.10.1007/BF02647825 ↗
42. Z.-K. Liu: Metall. Mater. Trans. A, 1997, vol. 28, pp. 1625–31.10.1007/s11661-997-0254-8 ↗
43. R.G. Faulkner: Acta Metall., 1987, vol. 35, pp. 2905–14.10.1016/0001-6160(87)90289-6 ↗
44. R.G. Faulkner, S.H. Song, and P.E.J. Flewitt: Mater. Sci. Technol., 2013, vol. 12, pp. 904–10.10.1179/mst.1996.12.11.904 ↗
45. G.R. Purdy, W.T. Reynolds Jr., and H.I. Aaronson: Solid–Solid Phase Transformations, The Japan Institute of Metals, Kyoto, 1999, pp. 1461–5.
46. M. Hoerner, M. Eberhart, and J. Speer: Proc. 3rd World Congr. Integr. Comput. Mater. Eng. (ICME 2015), Wiley, Hoboken, NJ, 2015, pp. 31–8.10.1002/9781119139508.ch4 ↗
47. J.E. Burke and D. Turnbull: Prog. Met. Phys., 1952, vol. 3, pp 220–92.10.1016/0502-8205(52)90009-9 ↗
48. I. Toda-Caraballo, C. Capdevila, G. Pimentel, and C.G. De Andrés: Comput. Mater. Sci., 2013, vol. 68, pp. 95–106.10.1016/j.commatsci.2012.10.012 ↗
49. L.M. Fu, H.R. Wang, W. Wang, and A.D. Shan: Mater. Sci. Technol., 2011, vol. 27, pp. 996–1001.10.1179/1743284711Y.0000000001 ↗