journal article·2017-04

Effect of Beam Oscillation on Microstructure and Mechanical Properties of AISI 316L Electron Beam Welds

Jyotirmaya Kar, Sanat Kumar Roy, Gour Gopal Roy

Publisher page

Abstract

The properties of electron beam-welded AISI 316L stainless steel butt joints prepared with and without beam oscillation were evaluated by microstructural analysis, mechanical testing like microhardness measurements, tensile tests at room and elevated temperature 973 K (700 °C), three-point bend, and Charpy impact tests. All joints, irrespective of being prepared with or without beam oscillation, were found to be defect free. Welds produced by beam oscillation exhibited narrower fusion zone (FZ) with lathy ferrite morphology, while the weld without beam oscillation was characterized by wider FZ and skeletal ferrite morphology. During tensile tests at room and elevated temperature 973 K (700 °C), all samples fractured in the base metal (BM) and showed almost the same tensile properties as that of the BM. However, the notch tensile tests at room temperature demonstrated higher strength for joints prepared with the oscillating beam. Besides, face and root bend tests, as well as Charpy impact tests, showed higher bending strength and notch toughness, respectively, for joints prepared with beam oscillation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. T. Ogawa and E. Tsunetomi: Weld. Res. Suppl., 1982, vol. 61, pp. 82s–93s.
2. J.C. Lippold and W.F. Savage: Weld. Res. Suppl., 1982, vol. 61, pp. 388–96.
3. J.A. Brooks, A.W. Thompson, and C. Williams: Weld. Res. Suppl., 1984, vol. 63, pp. 71–83.
4. T.P.S. Gill, M. Vijayalakshmi, J.B. Gnanamoorthy, and K.A. Padmanabhan: Weld. Res. Suppl., 1986, vol. 65, pp. 122s–28s.
5. M.G. Pujar, R.K. Dayal, T.P.S. Gill, and S.N. Malhotra: J. Mater. Sci. Lett., 1999, vol. 18, pp. 823–26.10.1023/A:1006657604758 ↗
6. C.I.M. Cottrell: Mater. Des., 1985, vol. 6, pp. 285–91.10.1016/0261-3069(85)90009-3 ↗
7. J. Yan, M. Gao, and X. Zeng: Opt. Lasers Eng., 2010, vol. 48, pp. 512–17.10.1016/j.optlaseng.2009.08.009 ↗
8. D.H. Kumar, A. Somireddy, and K. Gururaj: Int. J. Mater. Sci. Appl., 2012, vol. 1, pp. 1–7.
9. D.H. Kumar, T. Shaktivelu, G.M. Nanda, K.S. Chandravathi, K. Laha, S.K. Albert, K. Hemanth, B. Shanmugarajan, and A.S. Reddy: J. Mater. Sci. Res., 2012, vol. 2, pp. 124–34.
10. B. Joseph, D. Katherasan, P. Sathiya, and C.V Srinivasa Murthy: Int. J. Eng. Sci. Technol., 2012, vol. 4, pp. 169–76.10.4314/ijest.v4i2.13 ↗
11. S.C. Tjong, S.M. Zhu, N.J. Ho, and J.S. Ku: J. Nucl. Mater., 1995, vol. 227, pp. 24–31.10.1016/0022-3115(95)00142-5 ↗
12. J. Kar, S.K. Roy, and G.G. Roy: J. Mater. Process. Technol., 2016, vol. 233, pp. 174–85.10.1016/j.jmatprotec.2016.03.001 ↗
13. N.K. Babu, S.G.S. Raman, C.V.S. Murthy, and G.M. Reddy: Sci. Technol. Weld. Join., 2005, vol. 10, pp. 583–90.10.1179/174329305X57473 ↗
14. P. Fu, Z. Mao, C. Zuo, Y. Wang, and C. Wang: Chin. J. Aeronaut., 2014, vol. 27, pp. 1015–21.10.1016/j.cja.2014.03.020 ↗
15. G.M. Reddy, C.V.S. Murthy, N. Viswanathan, and K.P. Rao: Sci. Technol. Weld. Join., 2007, vol. 12, pp. 106–14.10.1179/174329307X159838 ↗
16. K. Hao, G. Li, M. Gao, and X. Zeng: J. Mater. Process. Technol., 2015, vol. 225, pp. 77–83.10.1016/j.jmatprotec.2015.05.021 ↗
17. H. Schultz: Electron Beam Welding, Woodhead Publishing Ltd., Cambridge, 1993. ISBN 1 85573 050 2.10.1533/9781845698782.1 ↗
18. ASTM E3-11: 2011, pp. 1–12.
19. ASTM E8/E8M-15a: 2009, pp. 1–27.
20. ASTM E21-09: 2004, pp. 1–8.
21. ASTM E338-03: 2003, pp. 1–6.
22. ASTM E23-12c: 2016, pp. 1–26.10.1053/j.jrn.2016.03.001 ↗
23. ASTM E190-14: 2003, pp. 2–4.
24. ASTM E384-11ε1: 2012, pp. 1–43.
25. J.W. Elmer, S.M. Allen, and T.W. Eagar: Metall. Trans. A, 1989, vol. 20A, pp. 2117–31.10.1007/BF02650298 ↗
26. T.W. Eagar, S.M. Allen, and J.W. Elmer: Int. Conf. on Recent Trends in Weld. Sci. Technol., TWR., 1989, pp. 165–70.
27. S.S. Al-bermani, M.L. Blackmore, W. Zhang, and I. Todd: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 3422–34.10.1007/s11661-010-0397-x ↗
28. J.C. Lippold and D.J. Kotecki: Welding Metallurgy and Weldability of Stainless Steels, Wiley, Hoboken, 2005, pp. 141–230. ISBN 0-471-47379-0.
29. J.W. Fu, Y.S. Yang, J.J. Guo, J.C. Ma, and W.H. Tong: Mater. Sci. Technol., 2009, vol. 25, pp. 1013–16.10.1179/174328408X317093 ↗
30. D.H. Kumar, A.S. Reddy, P. Parameswaran, T.J. Kumar, M. Nandagopal, K. Laha, P. Selvi, T. Sakthivel, K. Guru-raj, and G. Padmanabhan: Mech. Eng. Res., 2013, vol. 3, pp. 77–86.10.5539/mer.v3n1p77 ↗
31. Y. Feng, Z. Luo, Z. Liu, Y. Li, Y. Luo, and Y. Huang: Mater. Des., 2015, vol. 85, pp. 24–31.10.1016/j.matdes.2015.07.011 ↗
32. ASTM E292-09ε1: 1996, pp. 1–12.
33. V.K. Rao, D.M.R. Taplin, and P.R. Rao: Metall. Trans. A, 1975, vol. 6, pp. 77–86.10.1007/BF02673673 ↗
34. S.L. Mannan, K.G. Samuel, and P. Rodriguez: Mater. Sci. Eng., 1984–1985, vol. 68, pp. 143–9.10.1016/0025-5416(85)90403-3 ↗
35. R. Raj and M.F. Ashby: Acta Metall., 1975, vol. 23, pp. 653–66.10.1016/0001-6160(75)90047-4 ↗
36. O. Kamiya, K. Kumagai, and Y. Kikuchi: Q. J. Jpn. Weld. Soc., 1991, vol. 9, pp. 61–7.10.2207/qjjws.9.525 ↗
37. W. Zhang, G.G. Roy, J.W. Elmer, and T. DebRoy: J. Appl. Phys., 2003, vol. 93, pp. 3022–33.10.1063/1.1540744 ↗