Grain Refinement of Deoxidized Copper
Source abstract
Abstract
Abstract This study reports the current status of grain refinement of copper accompanied in particular by a critical appraisal of grain refinement of phosphorus-deoxidized, high residual P (DHP) copper microalloyed with 150 ppm Ag. Some deviations exist in terms of the growth restriction factor (Q) framework, on the basis of empirical evidence reported in the literature for grain size measurements of copper with individual additions of 0.05, 0.1, and 0.5 wt pct of Mo, In, Sn, Bi, Sb, Pb, and Se, cast under a protective atmosphere of pure Ar and water quenching. The columnar-to-equiaxed transition (CET) has been observed in copper, with an individual addition of 0.4B and with combined additions of 0.4Zr-0.04P and 0.4Zr-0.04P-0.015Ag and, in a previous study, with combined additions of 0.1Ag-0.069P (in wt pct). CETs in these B- and Zr-treated casts have been ascribed to changes in the morphology and chemistry of particles, concurrently in association with free solute type and availability. No further grain-refining action was observed due to microalloying additions of B, Mg, Ca, Zr, Ti, Mn, In, Fe, and Zn (~0.1 wt pct) with respect to DHP-Cu microalloyed with Ag, and therefore are no longer relevant for the casting conditions studied. The critical microalloying element for grain size control in deoxidized copper and in particular DHP-Cu is Ag.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. L. Northcott: J. Inst. Metals, 1938, vol. 62, pp. 101–36.
2. G.C. Gould, G.W. Form, and J.F. Wallace: Trans. AFS, 1960, vol. 68, pp. 258–67.
3. O. L. Bustos and W. Reif: Metall., 1993, vol. 47, no. 11, pp. 1005–14.
4. O. L. Bustos and W. Reif: Metall., 1994, vol. 48, no. 2, pp. 123–27.
5. O. L. Bustos and W. Reif: Metall., 1994, vol. 48, no. 7, pp. 538–48.
6. W. Reif: Metall., 1998, vol. 52, no. 3, pp. 120–30.
7. Copper Development Association: Publication No. 120, Hertfordshire, UK, April 1998, Revised and reprinted December 2004. http://copperalliance.org.uk/docs/librariesprovider5/resources/pub-120-copper-and-copper-alloys.pdf. Accessed 3 June 2016.
8. New UPCAST® Developments Target Copper Tube Production and Environmental Benefits. Technology News International. 2010. vol. 99. pp. 28–29
9. E.R. Bagherian, C. Bell, M. Cooper, Y. Fan, B. Frame, and A. Abdolvand: Influence of Casting Speed on the Structure and Mechanical Properties of Continuous Cast DHP Copper Tube, In METAL 2014: 23rd International Conference on Metallurgy and Materials. Brno, Czech Republic: EU. Ostrava: TANGER, 2014, pp. 1163–68.
10. C.-A. Gandin, J.-L. Desbiolles, M. Rappaz, M. Swierkosz, and P. Thévoz. 3D Modelling of Grain Structure Formation during Solidification. http://dit-archives.epfl.ch/SCR96/scr-96.html. Accessed 15 September 2015.
11. R.U. Ayres, L.W. Ayres, and I. Råde: Report No. 24, Mining, Minerals and Sustainable Development MMSD, France, January 2002. http://pubs.iied.org/pdfs/G00740.pdf. Accessed 5 June 2016.
12. Standard test procedure for aluminum alloy grain refiners: TP-1. The Aluminum Association, Washington DC, 1987.
13. V. Laporte and A. Mortensen: Int. Mater. Rev., 2009;54(2):94–116.10.1179/174328009X392967 ↗
14. L. Felberbaum: Microstructure and Embrittlement of Leaded Copper Alloys. Ph.D. Thesis, École Polytechnique Fédérale de Lausanne EPFL, Switzerland, 2005, pp. 29, 33–34. http://commission-recherche.epfl.ch/files/content/sites/commissionrecherche/files/Prix%20de%20recherche%2006/Felberbaum_Laurent.pdf. Accessed 12 Jan 2015.
15. T. Freiling: Bismuth Induced Embrittlement of a Copper Substrate. M.Sc. Thesis, University of Missouri, United States, 2012, p. 8–9.
16. M. J. Balart, J. B. Patel, and Z. Fan: Int. J. Cast Met. Res., 2015, vol. 28, no. 4, pp. 242–47.10.1179/1743133615Y.0000000005 ↗
17. M. J. Balart, J. B. Patel, F. Gao, and Z. Fan: Int. J. Cast Met. Res., 2015, vol. 28, no. 4, pp. 248–56.10.1179/1743133615Y.0000000008 ↗
18. M.J. Balart, J.B. Patel, F. Gao, and Z. Fan: Effects of Casting Temperature and Microalloying Elements on the Grain Structure of DHP Copper. 24th Int. Conf. on Metallurgy and Materials (Brno; Czech Republic; 3–5 June 2015), pp. 1376–81.
19. W. Kurz, C. Bezençon and M. Gäumann: Sci. Technol. Adv. Mater., 2001, vol. 2, pp. 185–91.10.1016/S1468-6996(01)00047-X ↗
20. J.D. Hunt: Mater. Sci. Eng., 1984, vol. 65, pp. 75–83.10.1016/0025-5416(84)90201-5 ↗
21. Z. Fan: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1409–18.10.1007/s11661-012-1495-8 ↗
22. H. Men and Z. Fan: Acta Mater., 2011, vol. 59, pp. 2704–12.10.1016/j.actamat.2011.01.008 ↗
23. M.E. Watkins: A Comparison of Physical Properties of OF Copper and ETP Copper After Holding at Temperatures That Simulate High Voltage Transformer Use for up to One Year. IEEE Transmission and Distribution Conference and Exposition (T&D) (Orlando, FL; 7–10 May 2012). http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=6281588. Accessed 12 Jan 2015.10.1109/TDC.2012.6281588 ↗
24. J.R. Davis (Editor): Copper and Copper Alloys, ASM Speciality Handbook. 2nd ed., Asm International, Materials Park, OH, 2008, pp. 7, 171–94, 360–61, 376.
25. K. F. Kobayashi and P. H. Shingu: J. Mater. Sci., 1988, vol. 23, pp. 2157–66.10.1007/BF01115783 ↗
26. S. Walder and P. L. Ryder: Acta Metall. Mater., 1995, 43(11), 4007–4013.10.1016/0956-7151(95)00092-A ↗
27. D.H. StJohn, M. Qian, M.A. Easton, P. Cao, and Z. Hildebrand: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1669–79.10.1007/s11661-005-0030-6 ↗
28. Y.C. Lee, A.K. Dahle, and D.H. StJohn: Metall. Mater. Trans. A, 2013, vol. 31A, pp. 2895–906.
29. M.A. Easton and D.H. StJohn: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1911–20.10.1007/s11661-005-0054-y ↗
30. A. Kozlov and R. Schmid-Fetzer: Growth Restriction Factor in Al-Si-Mg-Cu Alloys. 3rd Int. Conf. on Advances in Solidification Processes, IOP Conf. Series: Materials Science and Engineering, 2011, vol. 27.10.1088/1757-899X/27/1/012001 ↗
31. A. Lόpez and E.J. Mittemeijer: Scr. Mater., 2004, vol. 51, pp. 1–5.10.1016/j.scriptamat.2004.03.028 ↗
32. A. Mirak, C.J. Davidson, and J.A. Taylor: Corrosion Sci., 2010, vol. 52, pp. 1992–2000.10.1016/j.corsci.2010.02.003 ↗
33. H.J.T. Ellingham: J. Soc. Chem. Ind., 1944, vol. 63, 125–33.10.1002/jctb.5000630501 ↗
34. S.M. Howard: Ellingham Diagrams, Internet resource for MET 320—Metallurgical Thermodynamics, South Dakota School of Mines and Technology, Rapid City, SD. http://showard.sdsmt.edu/MET320/Handouts/EllinghamDiagrams/Ellingham_v22_Macro.pdf. Accessed 13 Feb 2014.
35. Physical Constants of Inorganic Compounds. https://www.slac.stanford.edu/BFROOT/www/Detector/Backgrounds/BkG4Sim/Planning/Validations/neutronCounters/04_02_85.pdf. Accessed 17 Aug 2015.
36. D.E.C. Corbridge: ‘Phosphorus 2000. Chemistry, Biochemistry and Technology. Amsterdam, Elsevier, 2000.
37. C. Stinner: Binary and Ternary Transition-Metal Phosphides as Hydrodenitrogenation Catalysts, PhD Thesis, Swiss Federal Institute of Technology Zurich, Switzerland, 2001, p. 5. http://e-collection.library.ethz.ch/view/eth:25633. Accessed 27 Aug 2015.
38. G. Pantazopoulos, A. Toulfatzis, S. Zormalia, A. Vazdirvanidis, and D. Skarmoutsos: J. Mater. Eng. Performance, vol. 21, no. 10, 2012, 2188–94.10.1007/s11665-012-0148-9 ↗
39. P. Villars: Material Phases Data System (MPDS), CH-6354 Vitznau, Switzerland; SpringerMaterials; sd_1703036, sd_0304865 (Springer, Heidelberg, 2014). http://materials.springer.com/isp/crystallographic/docs/sd_1703036; http://materials.springer.com/isp/crystallographic/docs/sd_0304865. Accessed 18 Aug 2015.
40. R. Monzen, T. Tada, T. Seo, and K. Higashimine: Mater. Lett., 2004, vol. 58, no. 14, pp. 2007–11.10.1016/j.matlet.2003.12.018 ↗
41. Z.M. Rdzawski, J. Stobrawa, and W. Głuchowski: J. Achiev. Mater. Manuf. Eng., 2009, vol. 33, no. 1, pp. 7–18.
42. J.S. Romero, M.A. Cruchaga, and D.J. Celentano: Metall. Mater. Trans. B, 2013, vol. 44B, pp. 624–52.10.1007/s11663-013-9815-y ↗
43. A.S. Pashinkin and V.A. Fedorov: Phase Equilibria in the Cu-Te System, Inorganic Materials, 2003, vol. 39, no. 6, pp. 539–54. Translated from Neorganicheskie Materialy, 2003, vol. 39, no. 6, pp. 647–63. Original Text Copyright @ 2003 by Pashinkin, Fedorov.10.1023/A:1024003932461 ↗