journal article·2016-05Open access

Austenite Formation from Martensite in a 13Cr6Ni2Mo Supermartensitic Stainless Steel

A. Bojack, L. Zhao, P. F. Morris, J. Sietsma

Abstract

Abstract The influence of austenitization treatment of a 13Cr6Ni2Mo supermartensitic stainless steel (X2CrNiMoV13-5-2) on austenite formation during reheating and on the fraction of austenite retained after tempering treatment is measured and analyzed. The results show the formation of austenite in two stages. This is probably due to inhomogeneous distribution of the austenite-stabilizing elements Ni and Mn, resulting from their slow diffusion from martensite into austenite and carbide and nitride dissolution during the second, higher temperature, stage. A better homogenization of the material causes an increase in the transformation temperatures for the martensite-to-austenite transformation and a lower retained austenite fraction with less variability after tempering. Furthermore, the martensite-to-austenite transformation was found to be incomplete at the target temperature of 1223 K (950 °C), which is influenced by the previous austenitization treatment and the heating rate. The activation energy for martensite-to-austenite transformation was determined by a modified Kissinger equation to be approximately 400 and 500 kJ/mol for the first and the second stages of transformation, respectively. Both values are much higher than the activation energy found during isothermal treatment in a previous study and are believed to be effective activation energies comprising the activation energies of both mechanisms involved, i.e., nucleation and growth.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. J.C.M. Farrar: The Alloy Tree: A Guide to Low-Alloy Steels, Stainless Steels and Nickel-Base Alloys, pp. 48–49, Woodhead Publishing Ltd., Cambridge, 2004.10.1533/9781855739925 ↗
2. J.J. Dufrane: in Supermartensitic Stainless Steel ‘99, KCI Publishing BV, Brussels, 1999, pp. 19–24.
3. P. Toussaint, J.J. Dufrane: in Supermartensitic Stainless Steel 2002, KCI Publishing BV, Brussels, 2002, pp. 23–28.
4. K. Kondo, M. Ueda, K. Ogawa, H. Amaya, H. Hirata, H. Takabe, Y. Miyazaki: in Supermartensitic Stainless Steel ‘99, KCI Publishing BV, Brussels, 1999, pp. 11–18.
5. Y. Wei: PhD Thesis, The University of Sheffield, England, 2005.
6. J. Hubackova, V. Cihal, K. Mazanec: Z. Werkstofftech., 1984, vol. 15, pp. 411-15.10.1002/mawe.19840151203 ↗
7. P.D. Bilmes, M. Solari, C.L. Llorente: Mater. Charact., 2001, vol. 46, pp. 285-96.10.1016/S1044-5803(00)00099-1 ↗
8. T.G. Gooch, P. Woollin, A.G. Haynes: in Supermartensitic Stainless Steel ‘99, KCI Publishing BV, Brussels, 1999, pp. 188–95.
9. Y.Y. Song, X.Y. Li, L.J. Rong, D.H. Ping, F.X. Yin, Y.Y. Li: Mater. Lett., 2010, vol. 64, pp. 1411-14.10.1016/j.matlet.2010.03.021 ↗
10. Y. Song, X. Li, L. Rong, Y. Li: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4075-79.10.1016/j.msea.2011.01.078 ↗
11. X.P. Ma, L.J. Wang, C.M. Liu, S.V. Subramanian: Mater. Sci. and Eng. A, 2011, vol. 528, pp. 6812-18.10.1016/j.msea.2011.05.065 ↗
12. P. Wang, S. Lu, D. Li, X. Kang, Y. Li: Acta Metall. Sinica, 2008, vol. 44, pp. 681-85.
13. Y.Y. Song, D.H. Ping, F.X. Yin, X.Y. Li, Y.Y. Li: Mater. Sci. Eng. A, 2010, vol. 527, pp. 614-18.10.1016/j.msea.2009.08.022 ↗
14. A. Bojack, L. Zhao, P.F. Morris, J. Sietsma: Mater. Charact., 2012, vol. 71, pp. 77-86.10.1016/j.matchar.2012.06.004 ↗
15. Y.K. Lee, H.C. Shin, D.S. Leem, J.Y. Choi, W. Jin, C.S. Choi: Mater. Sci. Technol., 2003, vol. 19, pp. 393-98.10.1179/026708303225009742 ↗
16. C. Gesnouin, A. Hazarabedian, P. Bruzzoni, J. Ovejero-García, P. Bilmes, C. Llorente: Corros. Sci., 2004, vol. 46, pp. 1633-47.10.1016/j.corsci.2003.10.006 ↗
17. G. Rožnovská, V. Vodárek, A. Korčák, M. Tvrdý: Sborník vědeckých prací Vysoké školy báňské - Technické univerzity Ostrava, 2005, no. 1, pp. 225–31.
18. C.A.D. Rodrigues, P.L.D. Lorenzo, A. Sokolowski, C.A. Barbosa, J.M.D.A. Rollo: Mater. Sci. Eng. A, 2007, vol. 460, pp. 149-52.10.1016/j.msea.2007.01.016 ↗
19. X.P. Ma, L.J. Wang, C.M. Liu, S.V. Subramanian: Mater. Sci. Eng. A, 2012, vol. 539, pp. 271-79.10.1016/j.msea.2012.01.093 ↗
20. Y.R. Liu, D. Ye, Q.L. Yong, J. Su, K.Y. Zhao, W. Jiang: J. Iron Steel Res., Int., 2011, vol. 18, no. 11, pp. 60-6.10.1016/S1006-706X(11)60118-0 ↗
21. X. Liu, K. Zhao, Y. Zhou, D. Ye, W. Jiang, Q. Yong, J. Su: Adv. Mater. Res., 2012, vols. 393-395, pp. 440-43.10.4028/www.scientific.net/AMR.628.440 ↗
22. Y. Zhou, K. Zhao, X. Liu, D. Ye, W. Jiang, Q. Yong, J. Su: Adv. Mater. Res., 2012, vols. 399-401, pp. 211-15.
23. T.A. Kop, J. Sietsma, S. van der Zwaag: J. Mater. Sci., 2001, vol. 36, pp. 519-26.10.1023/A:1004805402404 ↗
24. A. Bojack, L. Zhao, P.F. Morris, J. Sietsma: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5956-67.10.1007/s11661-014-2551-3 ↗
25. L. Zhao, N.H. van Dijk, E. Brück, J. Sietsma, S. van der Zwaag: Mater. Sci. Eng. A, 2001, vol. 313, pp.145-52.10.1016/S0921-5093(01)00965-0 ↗
26. D.C. Jiles: Acta Mater., 2003, vol. 51, pp. 5907-39.10.1016/j.actamat.2003.08.011 ↗
27. P.E. Merinov, A.G. Mazepa: Industrial Laboratory (Diagn. Mater.), 1997, vol. 63, no. 3, pp. 149-53.
28. G.F. Vander Voort: Metallography, principles and practice, p. 647, McGraw-Hill, Inc., New York, 1984.10.31399/asm.tb.mpp.9781627082600 ↗
29. Thermo-Calc Software package, Version S, Database TCFEv6.2, Stockholm, Sweden, 2011.
30. A. Bojack, L. Zhao, J. Sietsma: Solid State Phenom., 2011, vols. 172-174, pp. 899-904.10.4028/www.scientific.net/SSP.172-174.899 ↗
31. W. Xu, D. San Martin, P.E.J. Rivera Diaz del Castillo, S. van der Zwaag: Adv. Mater. Res., 2007, vols. 15-17, pp. 531-536.10.4028/www.scientific.net/AMR.15-17.531 ↗
32. B. Ravi Kumar, S. Sharma, P. Munda, R.K. Minz: Mater. Des., 2013, vol. 50, pp. 392-98.10.1016/j.matdes.2013.03.035 ↗
33. F. Christien, M.T.F. Telling, K.S. Knight: Mater. Charact., 2013, vol. 82, pp. 50-57.10.1016/j.matchar.2013.05.002 ↗
34. A. Bénéteau, P. Weisbecker, G. Geandier, E. Aeby-Gautier, B. Appolaire: Mater. Sci. Eng. A, 2005, vol. 393, pp. 63-70.10.1016/j.msea.2004.09.054 ↗
35. E.J. Mittemeijer, L. Cheng, P.J. van der Schaaf, C.M. Brakman, B.M. Korevaar: Metall. Trans. A, 1988, vol. 19A, pp. 925-32.10.1007/BF02628377 ↗
36. E.J. Mittemeijer: J. Mater. Sci., 1992, vol. 27, pp. 3977-87.10.1007/BF01105093 ↗
37. E.J. Mittemeijer, A. van Gent, P.J. van der Schaaf: Metall. Trans. A, 1986, vol. 17A, pp. 1441-45.10.1007/BF02650126 ↗
38. W. Baumann, A. Leineweber, E. Mittemeijer: J. Mater. Sci., 2010, vol. 45, pp. 6075-82.10.1007/s10853-010-4693-z ↗
39. C. Garcia, L.F. Alvarez, M. Carsi: Weld. Int., 1992, vol. 6, pp. 612-21.10.1080/09507119209548251 ↗
40. R. Kapoor, I.S. Batra: Mater. Sci. Eng. A, 2004, vol 371, pp. 324-34.10.1016/j.msea.2003.12.023 ↗
41. A. Goldberg, D.G. O’Connor: Nature, 1967, vol. 213, pp. 170-71.10.1038/213170a0 ↗
42. Y.Y. Meshkov, E.V. Pereloma: in Phase Transformations in Steels, vol. 1, E. Pereloma, D.V. Edmonds, (Eds.), Woodhead Publishing, Oxford, 2012, pp. 581–618.10.1533/9780857096104.4.581 ↗
43. R.W.K. Honeycombe, H.K.D.H. Bhadeshia: Steels: Microstructure and Properties, 3rd ed., pp. 7-8, Elsevier Ltd., Amsterdam, 2006.
44. R.D. Doherty: in Physical Metallurgy, 4th ed., vol. 2, R.W. Cahn, P. Haasen (Eds.), Elsevier Science B.V., Amsterdam, 1996, pp. 1363–505.10.1016/B978-044489875-3/50020-X ↗
45. R. Kapoor, L. Kumar, I.S. Batra: Mater. Sci. Eng. A, 2003, vol. 352, pp. 318-24.10.1016/S0921-5093(02)00934-6 ↗
46. F. Liu, F. Sommer, C. Bos, E.J. Mittemeijer: Int. Mater. Rev., 2007, vol. 52, pp. 193-212.10.1179/174328007X160308 ↗
47. Y.H. Jiang, F. Liu, S.J. Song: Acta Mater., 2012, vol. 60, pp. 3815-29.10.1016/j.actamat.2012.03.042 ↗
48. F. Liu, S.J. Song, F. Sommer, E.J. Mittemeijer: Acta Mater., 2009, vol. 57, pp. 6176-90.10.1016/j.actamat.2009.08.046 ↗
49. Smithells Metals Reference Book, W.F. Gale, T.C. Totemeier (Eds.), 8 ed., Elsevier Butterworth-Heinemann, Amsterdam, 2004.
50. [50] M. De Sanctis, G. Lovicu, R. Valentini, A. Dimatteo, R. Ishak, U. Migliaccio, R. Montanari, E. Pietrangeli: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 1878-87.10.1007/s11661-015-2811-x ↗