journal article·2014-09

Eutectic Morphology of Al-7Si-0.3Mg Alloys with Scandium Additions

Phromphong Pandee, C. M. Gourlay, S. A. Belyakov, Ryota Ozaki, Hideyuki Yasuda, Chaowalit Limmaneevichitr

Publisher page

Abstract

The mechanisms of Al-Si eutectic refinement due to scandium (Sc) additions have been studied in an Al-7Si-0.3Mg foundry alloy. The evolution of eutectic microstructure is studied by thermal analysis and interrupted solidification, and the distribution of Sc is studied by synchrotron micro-XRF mapping. Sc is shown to cause significant refinement of the eutectic silicon. The results show that Sc additions strongly suppress the nucleation of eutectic silicon due to the formation of ScP instead of AlP. Sc additions change the macroscopic eutectic growth mode to the propagation of a defined eutectic front from the mold walls opposite to the heat flux direction similar to past work with Na, Ca, and Y additions. It is found that Sc segregates to the eutectic aluminum and AlSi2Sc2 phases and not to eutectic silicon, suggesting that impurity-induced twinning does not operate. The results suggest that Sc refinement is mostly caused by the significantly reduced silicon nucleation frequency and the resulting increase in mean interface growth rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. F. Yilmaz and R. Elliott: J. Mater. Sci., 1989, vol. 24, pp. 2065-70.10.1007/BF02385422 ↗
2. W. Prukkanon, N. Srisukhumbowornchai and C. Limmaneevichitr: J. Alloys Compd., 2009, vol. 487, pp. 453-57.10.1016/j.jallcom.2009.07.169 ↗
3. W. Prukkanon, N. Srisukhumbowornchai and C. Limmaneevichitr: J. Alloys Compd., 2009, vol. 477, pp. 454-60.10.1016/j.jallcom.2008.10.016 ↗
4. U. Patakham, J. Kajornchaiyakul and C. Limmaneevichitr: J. Alloys Compd., 2013, vol. 575, pp. 273-84.10.1016/j.jallcom.2013.05.139 ↗
5. S. Khan and R. Elliott: J. Mater. Sci., 1996, vol. 31, pp. 3731-37.10.1007/BF00352787 ↗
6. J.H. Li and P. Schumacher: Int. J. Cast Met. Res., 2012, vol. 25, pp. 347-57.10.1179/1743133612Y.0000000039 ↗
7. A. Knuutinen, K. Nogita, S.D. McDonald, and A.K. Dahle: J. Light Metals., 2001, pp. 229–40.10.1016/S1471-5317(02)00004-4 ↗
8. K. Nogita and A.K. Dahle: Mater. Trans., 2001, vol. 42, pp. 393-96.10.2320/matertrans.42.393 ↗
9. S.Z. Lu and A. Hellawell: J. Cryst. Growth, 1985, vol. 73, pp. 316-28.10.1016/0022-0248(85)90308-2 ↗
10. S.Z. Lu and A. Hellawell: Metall. Trans. A, 1987, vol. 18, pp. 1721-33.10.1007/BF02646204 ↗
11. L.M. Hogan and H. Song: Metall. Trans. A, 1987, vol. 18, pp. 707-13.10.1007/BF02649487 ↗
12. K. Nogita, H. Yasuda, A. Takeuchi, K. Yoshida, Y. Suzuki, K. Uesugi and A.K. Dahle: Scripta Mater., 2006, vol. 55, pp. 787-90.10.1016/j.scriptamat.2006.07.029 ↗
13. K. Nogita, H. Yasuda, M. Yoshiya, S.D. McDonald, K. Uesugi, A. Takeuchi and Y. Suzuki: J. Alloys Compd., 2010, vol. 489, pp. 415-20.10.1016/j.jallcom.2009.09.138 ↗
14. A.K. Dahle, K. Nogita, J.W. Zindel, S.D. McDonald and L.M. Hogan: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 949-60.10.1007/s11661-001-0352-y ↗
15. A.K. Dahle, K. Nogita, S.D. McDonald, C. Dinnis and L. Lu: Mater. Sci. Eng. A, 2005, vol. 413–414, pp. 243-48.10.1016/j.msea.2005.09.055 ↗
16. K. Nogita, A. Knuutinen, S.D. McDonald, and A.K. Dahle: J. Light Met., 2001, pp. 219–28.10.1016/S1471-5317(02)00005-6 ↗
17. K. Nogita, S.D. McDonald, J.W. Zindel and A.K. Dahle: Mater. Trans., 2001, vol. 42, pp. 1981-86.10.2320/matertrans.42.1981 ↗
18. P.B. Crosley and L.F. Mondolfo: Mod. Cast, 1966, vol. 49, pp. 99-100.
19. Chin-Yu Yeh, Z.W. Lu, S. Froyen and Alex Zunger: Phys. rev. B, 1992, vol. 46, p. 10086-97.10.1103/PhysRevB.46.10086 ↗
20. D.M. Toebbens, N. Stuesser, K. Knorr, H.M. Mayer and G. Lampert: Mater. Sci. Forum, 2001, vol. 378, pp. 288-93.10.4028/www.scientific.net/MSF.378-381.288 ↗
21. K. Nogita, S.D. McDonald, K. Tsujimoto, K. Yasuda and A.K. Dahle: J. Electron Microsc., 2004, vol. 53, pp. 361-69.10.1093/jmicro/dfh048 ↗
22. C.R. Ho and B. Cantor: J. Mater. Sci., 1995, vol. 30, pp. 1912-20.10.1007/BF00353013 ↗
23. T.H. Ludwig, E. Schonhovd Dæhlen, P.L. Schaffer and L. Arnberg: J. Alloys Compd., 2014, vol. 586, pp. 180-90.10.1016/j.jallcom.2013.09.127 ↗
24. Y.H. Cho, H.C. Lee, K.H. Oh and A.K. Dahle: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2435-48.10.1007/s11661-008-9580-8 ↗
25. L. Lu, K. Nogita, S.D. McDonald and A.K. Dahle: JOM J. Miner. Met. Mater. Soc., 2004, vol. 56, pp. 52-58.10.1007/s11837-004-0254-8 ↗
26. M.M. Makhlouf: in Solidification Science and Technology, Proceedings of the John Hunt International Symposium, Z. Fan and I.C. Stone, eds., Brunel University Press, UK, 2011, pp. 193–203.
27. M.M. Makhlouf, H.V. Guthy: J. Light Met., 2001, vol. 1, pp. 199-218.10.1016/S1471-5317(02)00003-2 ↗
28. V. de L. Davies and J.M. West: J. Inst. Met., 1964, vol. 92, p. 175-80.
29. H. Nakae: in Solidification and Casting, B. Cantor and K. O’Reilly, eds., Institute of Physics Publishing, Bristol, UK, 2003, pp. 326–38.
30. P. Srirangam, M.J. Kramer and S. Shankar: Acta Mater., 2011, vol. 59, pp. 503-13.10.1016/j.actamat.2010.09.050 ↗
31. P. Srirangam, S. Chattopadhyay, A. Bhattacharya, S. Nag, J. Kaduk, S. Shankar, R. Banerjee and T. Shibata: Acta Mater., 2014, vol. 65, pp. 185-93.10.1016/j.actamat.2013.10.060 ↗
32. K. Nogita, S.D. McDonald and A.K. Dahle: Mater. Trans., 2004, vol. 45, pp. 323-26.10.2320/matertrans.45.323 ↗
33. L.L. Rokhlin, N.R. Bochvar, O.V. Rybal’chenko, I.E. Tarytina and A.V. Sukhanov: Russ. Metall., 2012, vol. 2012, pp. 606-11.10.1134/S0036029512070129 ↗
34. L.S. Toropova, D.G. Eskin, M.L. Kharakterova, and T.V. Dobatkina: Advance Aluminum Alloys containing Scandium: Structure and Properties, Gordon and Breach Science, Amsterdam, 1998.
35. J. Røyset and N. Ryum: Int. Mater. Rev., 2005, vol. 50, pp. 19-44.10.1179/174328005X14311 ↗
36. S.C. Flood and J.D. Hunt: Met. Sci., 1981, vol. 15, pp. 287-94.10.1179/030634581790426813 ↗
37. C.R. Ho and B. Cantor: Acta Metall. Mater., 1995, vol. 43, pp. 3231-46.10.1016/0956-7151(94)00480-6 ↗
38. A.L. Greer, A.M. Bunn, A. Tronche, P.V. Evans and D.J. Bristow: Acta Mater., 2000, vol. 48, pp. 2823-35.10.1016/S1359-6454(00)00094-X ↗
39. M.E. Schlesinger: Chem. Rev., 2002, vol. 102, pp. 4267-4301.10.1021/cr000039m ↗
40. E. Parthé: Acta Crystall., 1963, vol. 16, p. 71.10.1107/S0365110X63000141 ↗
41. Y. Dong and F.J. DiSalvo: Acta Crystall., 2005, vol. 61, pp. 223-24.10.1107/S0108767305001315 ↗
42. B. Aronsson, T. Lundström, and S. Rundqvist: Borides, Silicides, and Phosphides: A Critical Review of Their Preparation, Properties and Crystal Chemistry, Wiley, New York, 1965.
43. A.T. Tyvanchuk, T.I. Yanson, and B. Kotur: Russ. Metall., 1988, pp. 190–92.
44. J.Y. Chang and H.S. Ko: J. Mater. Sci. Lett., 2000, vol. 19, pp. 197-99.10.1023/A:1006746321922 ↗
45. K. Nogita, S. Ockert, J. Pierce, M. C. Greaves, C. M. Gourlay and A. K. Dahle: Int. J. Hydrogen Energy, 2009, vol. 34, pp. 7686-91.10.1016/j.ijhydene.2009.07.036 ↗
46. K. Nogita, J. Drennan and A.K. Dahle: Mater. Trans., 2003, vol. 44, pp. 625-28.10.2320/matertrans.44.625 ↗
47. K. Fisher, W. Kurz (1986) Fundamentals of Solidification. Trans Tech Publications, Lausanne.