Extrusion Suppression of TSV Filling Metal by Cu-W Electroplating for Three-Dimensional Microelectronic Packaging
Source abstract
Abstract
Extrusion behavior of Cu filling in through-silicon-via (TSV) under thermal loading was investigated in this study. In order to suppress the extrusion of Cu-filled TSV, Cu-W was filled in a tapered TSV by electroplating. The Cu-filled TSV was used as a reference for comparison. Defect less filling of Cu-W in TSV was achieved at a composition 92.4 wt pct Cu and 7.6 wt pct W. The coefficients of thermal expansion of both Cu-7.6 pctW and Cu were 10.8 × 10−6/°C and 16.5 × 10−6/°C, respectively. Initially, both Cu and Cu-W filled TSVs were annealed for 30 minutes at 723 K (450 °C) and the extrusion heights were measured. The results showed that the extrusion of Cu-W filled was suppressed significantly compared to Cu-filled TSVs. The annealed extrusion heights of Cu and Cu-W were found to be 1.369 and 0.465 µm, respectively. This showed around 34 pct lower extrusion height of Cu-W filled TSV as compared to Cu-filled TSV. The extrusion kinetics with different annealing durations and the mechanism of the suppression of extrusion in Cu-W filled TSV are also reported here.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. M. Motoyoshi: Proc. IEEE, 2009, vol. 97, pp. 43–48.10.1109/JPROC.2008.2007462 ↗
2. Y.-K. Ko, Y.-H. Ko, J.-H. Bang, and C.-W. Lee: JWJ, 2014, vol. 32, pp. 19–26.
3. D.-G. Kim, J.-W. Kim, S.-S. Ha, J.-P. Jung, Y.-E. Shin, J.-H. Moon, and S.-B. Jung: JWJ, 2006, vol. 24, pp. 172–78.
4. M. Umemoto, K. Tanida, Y. Nemoto, M. Hoshino, K. Kojima, Y. Shirai, and K. Takahashi: IEEE 54th Electronic Components and Technology Conference, 2004, vol. 1, pp. 616–23.
5. T. Ritzdorf, L. Graham, S. Jin, C. Mu, and D.B. Fraser: IEEE International Interconnect Technology Conference, 1998, vol. 1, p. 166.
6. D.H. Kim, S. Mukhopadhyay, and S.K. Lim: IEEE International Interconnect Technology Conference, 2009, p. 26.10.1109/IITC.2009.5090331 ↗
7. M.-H. Roh, J.-H. Lee, W.J. Kim, J.P. Jung, and H.-T. Kim: JWJ, 2013, vol. 31, pp. 11–16.
8. S.-H. Kee, J.-O. Shin, I.-H. Jung, W.-J. Kim, and J.-P. Jung: JWJ, 2014, vol. 32, pp. 11–18.
9. R. Hon, S.W.R. Lee, S.X. Zhang, and C.K. Wong: IEEE Electronics Packaging Technology Conference, 2005, pp. 384–89.
10. R. Tummala, J.E.J. Rymasewski, and A.G. Klopfenstein: Microelectronics Packaging Handbook, 2nd ed., Chapman & Hall, New York, 1997.10.1007/978-1-4615-6041-8 ↗
11. J.N. Calata, J.G. Bai, X. Liu, S. Wen, and G.Q. Lu: IEEE Trans. Adv. Packag., 2005, vol. 28, pp. 404–12.10.1109/TADVP.2005.852837 ↗
12. A.S. Budiman, H.A.S. Shin, B.J. Kim, S.H. Hwang, H.Y. Son, M.S. Suh, Q.H. Chung, K.Y. Byun, N. Tamura, M. Kunz, and Y.C. Joo: Microelectron. Reliab., 2012, vol. 52, p. 530.10.1016/j.microrel.2011.10.016 ↗
13. X. Liu, Q. Chen, V. Sundaram, R.R. Tummala, and S.K. Sitaraman: Microelectron. Reliab., 2013, vol. 53, pp. 70–78.10.1016/j.microrel.2012.06.140 ↗
14. Y.-K. Ko, Y.-H. Ko, J.-H. Bang, and C.-W. Lee: JWJ, 2014, vol. 32, pp. 68–73.
15. T.C. Tsai, W.C. Tsao, W. Lin, C.L. Hsu, C.L. Lin, C.M. Hsu, J.F. Lin, C.C. Huang, and J.Y. Wu: Microelectron. Eng., 2012, vol. 92, pp. 29–33.10.1016/j.mee.2011.03.004 ↗
16. I.E. Wolf, K. Croes, O.V. Pedreira, R. Labie, A. Redolfi, M.V.D. Peer, K. Nanstreels, C. Okoro, B. Vandevelde, and E. Beyne: Microelectron. Reliab., 2011, vol. 51, pp. 1856–59.10.1016/j.microrel.2011.06.003 ↗
17. S.K. Ryu, T. Jiang, K.H. Lu, J. Im, H.Y. Son, K.Y. Byun, R. Huang, and P.S. Ho: Appl. Phys. Lett., 2012, vol. 12, pp. 041901–04.10.1063/1.3678020 ↗
18. K.N. Tu, H.-Y. Hsiao, and C. Chen: Microelectron. Reliab., 2013, vol. 53, pp. 2–6.10.1016/j.microrel.2012.07.029 ↗
19. L. Xu, P. Dixit, J. Miao, J.H.L. Pang, X. Zhang, K.N. Tu, and R. Preisser: Appl. Phys. Lett., 2007, vol. 90, pp. 033111–13.10.1063/1.2432284 ↗
20. N. Lin, J. Miao, and P. Dixit: Microelectron. Reliab., 2013, vol. 53, pp. 1943–53.10.1016/j.microrel.2013.04.003 ↗
21. H.-A.-S. Shin, B.-J. Kim, J.-H. Kim, S.-H. Hwang, A. S. Budiman, H.-Y. Son, K.-Y. Byun, N. Tamura, M. Kunz, D.-I. Kim, and Y.-C. Joo: J. Electron. Mater., 2012, vol. 41, pp. 712–19.10.1007/s11664-012-1943-7 ↗
22. D. Xu, W.L. Kwan, K. Chen, X. Zhang, V. Ozoliņš, and K.N. Tu: Appl. Phys. Lett., 2007, vol. 91, p. 254105.10.1063/1.2825412 ↗
23. T. Wang, K. Jeppson, L. Ye, and J. Liu: Small, 2011, vol. 7, pp. 2313–17.10.1002/smll.201100615 ↗
24. A.S. Muhsan, F. Ahmad, N.M. Mohamed, and M.R. Raza: J. Nanoeng. Nanomanuf., 2013, vol. 3, pp. 248–52.10.1166/jnan.2013.1140 ↗
25. B. Horvath, J. Kawakita, and T. Chikyow: Jpn. J. Appl. Phys., 2014, vol. 53, p. 06JH01.10.7567/JJAP.53.06JH01 ↗
26. Y.T. Ding, Y.Y. Yan, Q.W. Chen, S.W. Wang, X. Chen, and Y.Y. Chen: Sci. China Technol. Sci., 2014, vol. 57, pp. 1616–25.10.1007/s11431-014-5551-z ↗
27. R. Sato, A. Tsukada, Y. Sato, Y. Iwata, H. Murata, S. Sekine, R. Kimura, and K. Kishi: 3D Systems Integration Conference, IEEE, Osaka, 2012, pp. 1–4.
28. C.Y. Ho and R.E. Taylor: Thermal Expansion of Solids, ASM International, Materials Park, OH, 1998.
29. H. Kikuchi, Y. Yamada, A.M. Ali, J. Liang. T. Fukushima, T. Tanaka, and M. Koyanagi: Jpn. J. Appl. Phys., 2008, vol. 47, pp. 2801–06.10.1143/JJAP.47.2801 ↗
30. Y. Meng, Y. Shen, C. Chen, Y. Li, and X. Feng: Appl. Surf. Sci., 2013, vol. 282, pp. 757–64.10.1016/j.apsusc.2013.06.049 ↗
31. M.A.E. Hadek and S.M. Kaytbay: Metall. Mater. Trans. A, 2013, vol. 44A, p. 544.10.1007/s11661-012-1396-x ↗
32. Z. Ghaferi, K. Raeissi, M.A. Golozar, and H. Edris: Surf. Coat. Technol., 2011, vol. 205, p. 497.10.1016/j.surfcoat.2011.07.074 ↗
33. G.A. Dosovitskiy, S.V. Samoilenkov, A.R. Kaul, and D.P. Rodionov: Int. J. Thermophys., 2009, vol. 30, p. 1931.10.1007/s10765-009-0660-9 ↗
34. M. Ahmadi and M.J-F. Guinel: J. Alloys Compd., 2013, vol. 574, pp. 196–205.10.1016/j.jallcom.2013.04.033 ↗
35. Y. Tao, A. Hu, T. Hang, L. Peng, and M. Li: Appl. Surf. Sci., 2013, vol. 282, pp. 632–37.10.1016/j.apsusc.2013.06.023 ↗
36. K.S. Kim, Y.C. Lee, J.H. Ahn, J.Y. Song, C.D. Yoo, and S.B. Jung: Korean J. Met. Mater., 2010, vol. 48, pp. 1028–34.10.3365/KJMM.2010.48.11.1028 ↗
37. A. Brenner: Electrodeposition of Alloys: Principles and Practice, Academic Press Inc., New York, 1963.
38. I. Mizushima, P.T. Tang, H.N. Hansen, and M.A.J. Somers: Electrochim. Acta, 2006, vol. 51, pp. 6128–34.10.1016/j.electacta.2005.11.053 ↗
39. Y.M Lin and S.C. Yen: Appl. Surf. Sci., 2008, vol. 178, pp. 116–26.10.1016/S0169-4332(01)00306-3 ↗
40. V.M. Dublin: Microelectron. Eng., 2003, vol. 70, pp. 461–69.10.1016/S0167-9317(03)00420-9 ↗
41. S.C. Hong, W.G. Lee, W.J. Kim, J.H. Kim, and J.P. Jung: Microelectron. Reliab., 2011, vol. 51, pp. 2228–35.10.1016/j.microrel.2011.06.031 ↗
42. M.H. Roh, S.Y. Park, W.J. Kim, and J.-P. Jung: JWJ, 2011, vol. 29, pp. 295–300.
43. ASTM E 3-95 1995 Standard Practice for Preparation of Metallographic Specimens.
44. Z.-L. Lu, L.-M. Luo, J.-B. Chen, X.-M. Huang, J.-G. Cheng, and Y.-C. Wu: Mater. Sci. Eng. A, 2015, vol. 626, pp. 61–66.10.1016/j.msea.2014.12.047 ↗
45. A. Sharma, S. Bhattacharya, S. Das, and K. Das: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5587–5601.10.1007/s11661-013-1894-5 ↗
46. A. Sharma, S. Bhattacharya, S. Das, H.-J. Fecht, and K. Das: J. Alloys Compd., 2013, vol. 574, pp. 609–16.10.1016/j.jallcom.2013.06.023 ↗
47. D.K. Shin and J.J. Lee: IEEE Trans. Compon. Packag. Manuf. Technol. B, 1998, vol. 21, pp. 413–21.10.1109/96.730423 ↗
48. J. Yan, H. Takahashi, J.I. Tamaki, X. Gai, H. Harada, and J. Patten: Appl. Phys. Lett., 2005, vol. 86, p. 181913.10.1063/1.1924895 ↗
49. A. Heryanto, W.N. Putra, A. Trigg, S. Gao, W.S. Kwon, F.X. Che, X. F. Ang, J. Wei, R.I. Made, C.L. Gan, and K.L. Pey: J. Electron. Mater., 2012, vol. 41, pp. 2533–42.10.1007/s11664-012-2117-3 ↗
50. I.D. Wolf, K. Croes, O.V. Pedreira, R. Labie, A. Redolfi, and M.V. Peer: Microelectron. Reliab., 2011, vol. 51, pp. 1856–59.10.1016/j.microrel.2011.06.003 ↗
51. L.W. Kong, A. C. Rudack, P. Krueger, E. Zschech, S. Arkalgud, and A.C. Diebold: Microelectron. Eng., 2012, vol. 92, pp. 24–28.10.1016/j.mee.2011.04.012 ↗
52. D. Askeland, P.P. Fulay, and W. Wright: The Science and Engineering of Materials, 6th ed., Cengage Learning, Stamford, CT, 2010.
53. P. Saettler, M. Boettcher, and K.J. Wolter: IEEE Electronic Components and Technology Conference, 2012, San Diego, CA, pp. 619–24.
54. R.L. Web and N.H. Kim: Principles of Enhanced Heat Transfer, 2nd ed., Wiley, New York.
55. F.X. Che, W.N. Putra, A. Heryanto, A. Trigg, X. Zhang, and C.L. Gan: IEEE Trans. Compon. Packag. Manuf. Technol., 2013, vol. 3, pp. 732–39.10.1109/TCPMT.2013.2252955 ↗
56. D. Zhang, K. Hummler, L. Smith, and J.J.Q. Lu: IEEE Electronic Components and Packaging Conference, 2013, Las Vegas, NV, pp. 1407–13.
57. D. Malta, C. Gregory, M. Lueck, D. Temple, M. Krause, F. Altmann, M. Petzold, M. Weatherspoon, and J. Miller: IEEE Electronic Components and Technology Conference, 2011, Lake Buena Vista, FL, pp. 1815–21.