Microstructure and Properties of Laser-Deposited Ti6Al4V Metal Matrix Composites Using Ni-Coated Powder
Source abstract
Abstract
As a layer additive rapid manufacturing process, laser engineered net shaping (LENS) can fabricate three-dimensional components directly from a computer-aided design (CAD) model. In this work, the LENS process was employed to fabricate Ti6Al4V metal matrix composites using powder mixtures of gas-atomized Ti6Al4V powder and varying volume fractions of Ni nanocoated TiC particles. The as-fabricated microstructures were studied using scanning electron microscopy (SEM), X-ray energy-dispersive spectroscopy (EDS), X-ray diffraction (XRD), differential thermal analyzer (DTA), and transmission electron microscopy (TEM) techniques. The interfaces between the metal matrix and ceramic particles were examined. The presence of intermetallic phases and resolidified TiC particles was rationalized on the basis of the thermal field during deposition. The influence of LENS parameters on the microstructure evolution and mechanical behavior of the metal matrix composites (MMCs) was also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing and 3D Printing Technologies · Additive Manufacturing Materials and Processes · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. S. Rawal: JOM, 2001, vol. 53 (4), pp. 14–1710.1007/s11837-001-0139-z ↗
2. T.W. Clyne, P.J. Withers: An Introduction to Metal Matrix Composites, Cambridge University Press, New York, NY, 1993, pp. 166–7110.1017/CBO9780511623080.007 ↗
3. A.B. Pandey, B.S. Majumdar, D.B. Miracle: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 921–3610.1007/s11661-000-1011-4 ↗
4. S. Suresh, A. Mortensen, A. Needleman: Fundamentals of Metal-Matrix Composites, Butterworth-Heinemann, Boston, MA, 1993, pp. 233–50
5. T.P.D. Rajan, R.M. Pillai, B.C. Pai: J. Mater. Sci., 1998, vol. 33, pp. 3491–50310.1023/A:1004674822751 ↗
6. P. Yih, D.D.L. Chung: J. Mater. Sci., 1997, vol. 32, pp. 2873–9410.1023/A:1018624517297 ↗
7. J. Carmai, K.H. Baik, F.P.E. Dunne: Acta Mater., 2002, vol. 50, pp. 4981–9310.1016/S1359-6454(02)00307-5 ↗
8. S. Qin, G. Zhang: Mater. Sci. Eng. A, 2000, vol. 279, pp. 231–3610.1016/S0921-5093(99)00627-9 ↗
9. J. He, Y. Zhou, D. Baker, W. Harrigan, and E.J. Lavernia: MS&T 2003, Chicago, IL, Nov. 9–12, 2003, p. 13
10. J. Ye, B.Q. Han, J.M. Schoenung: Philos. Mag. Lett., 2006, vol. 86 (11), pp. 721–3210.1080/09500830600986109 ↗
11. Karl U. Kainer: Metal Matrix Composites, Custom-Made Materials for Automotive and Aerospace Engineering, Wiley-VCH Verlag GmbH & Co. KgaA, Weinheim, Germany, 2006, pp. 266–6710.1002/3527608117 ↗
12. D.J. Lloyd: Int. Mater. Rev., 1994, vol. 39 (1), pp. 1–2310.1179/imr.1994.39.1.1 ↗
13. W. Liu, J.N. DuPont: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1133–4010.1007/s11661-004-1016-5 ↗
14. R. Banerjee, P.C. Collins, A. Genç, H.L. Fraser: Mater. Sci. Eng. A, 2003, vol. 358 (1–2), pp. 343–4910.1016/S0921-5093(03)00299-5 ↗
15. C.L. Atwood, M.L. Griffith, L.D. Harwell, D.L. Greene, D.E. Reckaway, M.T. Ensz, D.M. Keicher, M.E. Schlienger, J.A. Romero, M.S. Oliver, F.P. Jeantette, and J.E. Smugeresky: “Laser Spray Fabrication for Net-Shape Rapid Product Realization LDRD,” Sandia Report SAND99-0739, Sandia National Laboratory, Albuquerque, NM, 1999, pp. 1–3010.2172/5657 ↗
16. B. Zheng, Y. Lin, Y. Zhou, J.E. Smugeresky, E.J. Lavernia: TMS Lett., 2005, vol. 4, pp. 113–14
17. W. Hofmeister, M. Griffith, M. Ensz, J. Smugeresky: JOM, 2001, vol. 53 (9), pp. 30–3410.1007/s11837-001-0066-z ↗
18. B. Zheng, J. E. Smugeresky, Y. Zhou, and E.J. Lavernia: Processing of PowderMet’06, San Diego, CA, June 18–21, 2006
19. J.E. Smugeresky, B. Zheng, Y. Zhou, and E.J. Lavernia: TMS’06, San Antonio, TX, Mar. 12–16, 2006
20. Dieter M. Herlach: Mater. Sci. Eng., R12, 1994, vols. 4–5 (08), pp. 177–27210.1016/0927-796X(94)90011-6 ↗
21. E.J. Lavernia, J.D. Ayers, T.S. Srivatsan: Int. Mater. Rev., 1992, vol. 37 (1), pp. 1–4410.1179/imr.1992.37.1.1 ↗
22. X. Wu, J. Liang, J. Mei: Mater. Des., 2004, vol. 25, pp. 137–4410.1016/j.matdes.2003.09.009 ↗
23. J. Tiley, T. Searles, E. Lee, S. Kar, R. Banerjee, J.C. Russ, and H.L. Fraser: Mater. Sci. Eng., A, 2004, vol. 372 (1–2), pp. 191–9810.1016/j.msea.2003.12.008 ↗
24. Weiping Liu, J.N. DuPont: Scripta Mater., 2003, vol. 48 (9), pp. 1337–4210.1016/S1359-6462(03)00020-4 ↗
25. C.M. Ward-Close, R. Minor, P.J. Doorbar: Intermetallics, 1996, vol. 4 (3), pp. 217–2910.1016/0966-9795(95)00037-2 ↗
26. ASM Handbook, vol. 3, Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1992, pp. 2–114
27. http://asm.matweb.com/search/SpecificMaterial.asp?bassnum=MTP641
28. Thomas H. Courtney: Mechanical Behavior of Materials, McGraw-Hill, New York, NY, 2000, pp. 182–83
29. W.H. Jiang, R. Kovacevic: J. Mater. Process. Technol., 2007, vol. 186 (1–3), pp. 331–3810.1016/j.jmatprotec.2006.12.053 ↗
30. John F. Ready: Industrial Applications of Lasers, Academic Press, New York, NY, 1997, pp. 11–14
31. LIA Handbook of Laser Materials Processing, John F. Ready, ed., Laser Institute of America, Magnolia Publishing, Orlando, FL, 2001, pp. 182–83
32. R.T.C. Choo, J. Szekely: Weld. J., 1994, vol. 73, pp. 25–31
33. H.O. Pierson: Handbook of Refractory Carbides and Nitrides, 1st ed., William Andrew Publishing, Noyes, 1996, pp. 55–7410.1016/B978-081551392-6.50005-2 ↗
34. F.F. Lange and K.A.D. Lambe: Phil. Mag., 1968, pp. 129–3610.1080/14786436808227315 ↗
35. S. Moyne, C. Poilane, K. Kitamura, S. Miyazaki, P. Delobelle, C. Lexcellent: Mater. Sci. Eng. A, 1999, vols. 273–275, pp. 727–3710.1016/S0921-5093(99)00405-0 ↗
36. V.É. Gyunter, V.I. Chernyshev, T.L. Chekalkin: J. Appl. Mech. Tech. Phys., 2000, vol. 41 (4), pp. 740–4410.1007/BF02466875 ↗