journal article·2012-12

Microstructure Characteristics and Mechanical Properties of Al 413/Mg Joint in Compound Casting Process

E. Hajjari, M. Divandari, S. H. Razavi, T. Homma, S. Kamado

Publisher page

Abstract

Al 413/Mg couples were prepared by the compound casting process. Characterization of the interface by an optical microscope and scanning electron microscope (SEM) showed that a relatively uniform interface composed of three different layers is formed at the interface. The thickness of the interface depended on the melt/insert volume ratio (VR) significantly and was 80 and 470 μm in 1.25 and 3 VRs, respectively. The results of the energy dispersive X-ray spectroscopy (EDS), wavelength dispersive X-ray spectroscopy (WDS), and X-ray diffraction analysis showed that the interface layers are mainly composed of Al3Mg2, Al12Mg17, and Mg2Si intermetallic compounds. An accumulation of magnesium oxide films was detected within the (Al12Mg17 + δ) eutectic structure of the interface next to the magnesium base metal. Despite different thicknesses of the interface, shear strengths of the Al 413/Mg couples prepared in 1.25 and 3 VRs were almost same. The study of the fracture surfaces of the Al 413/Mg couples revealed that the accumulated magnesium oxide films act as a weak point for initiation of longitudinal cracks and failure of the joint.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Magnesium Alloys: Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. S. Ignat, P. Sallamand, D. Grevey, and M. Lambertin: Appl. Surf. Sci., 2004, vol. 225, pp. 124–34.10.1016/j.apsusc.2003.09.043 ↗
2. J. Li, W. Du, S. Li, and Z. Wang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1255–59.10.1016/j.msea.2009.10.006 ↗
3. O. Dezellus, L. Milani, F. Bosselet, M. Sacerdote-Peronnet, D. Rouby, and J.C. Viala: J. Mater. Sci., 2008, vol. 43, pp. 1749–56.10.1007/s10853-007-2411-2 ↗
4. P. Liu, Y. Li, H. Geng, and J. Wang: Mater. Lett., 2007, vol. 61, pp. 1288–91.10.1016/j.matlet.2006.07.010 ↗
5. R. Borrisutthekul, Y. Miyashita, and Y. Mutoh: Sci. Technol. Adv. Mater., 2005, vol. 6, pp. 199–204.10.1016/j.stam.2004.11.014 ↗
6. L.M. Liu, H.Y. Wang, and Z.D. Zhang: Scripta Mater., 2007, vol. 56, pp. 473–76.10.1016/j.scriptamat.2006.11.034 ↗
7. L. Liu, H. Wang, G. Song, and J. Ye: J. Mater. Sci., 2007, vol. 42, pp. 565–72.10.1007/s10853-006-1068-6 ↗
8. L. Liu and D. Ren: Mater. Des., 2011, vol. 32, pp. 3730–35.10.1016/j.matdes.2011.03.050 ↗
9. R. Zettler, A. Augusto, M.D. Silva, S. Rodrigues, A. Blanco, and J.F.D. Santos: Adv. Eng. Mater., 2006, vol. 8, pp. 415–21.10.1002/adem.200600030 ↗
10. Y.S. Sato, S.H.C. Park, M. Michiuchi, and H. Kokawa: Scripta Mater., 2004, vol. 50, pp. 1233–36.10.1016/j.scriptamat.2004.02.002 ↗
11. J. Yan, Z. Xu, Z. Li, L. Li, and S. Yang: Scripta Mater., 2005, vol. 53, pp. 585–89.10.1016/j.scriptamat.2005.04.022 ↗
12. L. Peng, L. Yajiang, G. Haoran, W. Juan, M. Haijun, and G. Guolin: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 649–54.
13. J. Wang, L. Yajiang, and H. Wanqun: React. Kinet. Catal., 2008, vol. 95, pp. 71–79.10.1007/s11144-008-5259-9 ↗
14. L.M. Zhao and Z.D. Zhang: Scripta Mater., 2008, vol. 58, pp. 283–86.10.1016/j.scriptamat.2007.10.006 ↗
15. J.P. Volder: Aluminum, 1993, vol. 4, pp. 11–16.
16. N. Horikawa, T. Ito, T. Noguchi, and T. Nakamura: Int. J. Cast Met. Res., 2003, vol. 16, pp. 365–69.10.1080/13640461.2003.11819610 ↗
17. A. Avci, N. Ilkaya, M. Simsir, and A. Akdemir: J. Mater. Process. Technol., 2009, vol. 209, pp. 1410–16.10.1016/j.jmatprotec.2008.03.052 ↗
18. J.S. Ho, C.B. Lin, and C.H. Liu: J. Mater. Sci., 2004, vol. 39, pp. 2473–80.10.1023/B:JMSC.0000020012.88809.33 ↗
19. J. Pan, M. Yoshida, G. Sasaki, H. Fukunaga, H. Fujimura, and M. Matsuura: Scripta Mater., 2000, vol. 43, pp. 155–59.10.1016/S1359-6462(00)00385-7 ↗
20. K.H. Choe, K.S. Park, B.H. Kang, G.S. Cho, K.Y. Kim, K.W. Lee, M.H. Kim, A. Ikenaga, and S. Koroyasu: J. Mater. Sci. Technol., 2008, vol. 24, pp. 60–64.
21. M. Divandari and A.R. Vahid Golpayegani: Mater. Des., 2009, vol. 30, pp. 3279–85.10.1016/j.matdes.2009.01.008 ↗
22. M. Scanlan, D.J. Browne, and A. Bates: Mater. Sci. Eng. A, 2005, vols. 413–414, pp. 66–71.10.1016/j.msea.2005.09.004 ↗
23. K.J.M. Papis, B. Hallstedt, J.F. Loffler, and P.J. Uggowitzer: Acta Mater., 2008, vol. 56, pp. 3036–43.10.1016/j.actamat.2008.02.042 ↗
24. K.J.M. Papis, J.F. Loffler, and P.J. Uggowitzer: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2274–79.10.1016/j.msea.2009.11.066 ↗
25. E. Hajjari, M. Divandari, S.H. Razavi, S.M. Emami, T. Homma, and S. Kamado: J. Mater. Sci., 2011, vol. 46, pp. 6491–99.10.1007/s10853-011-5595-4 ↗
26. M. Sacerdote-Peronnet, E. Guiot, F. Bosselet, O. Dezellus, D. Rouby, and J.C. Viala: Mater. Sci. Eng. A, 2007, vols. 445–446, pp. 296–301.10.1016/j.msea.2006.09.033 ↗
27. H. Baker: Alloy Phase Diagrams, vol. 3, ASM Handbook, 2nd ed., ASM INTERNATIONAL, Materials Park, OH, 1992.
28. S. Guldberg and N. Ryum: Mater. Sci. Eng. A, 2000, vol. 289, pp. 143–50.10.1016/S0921-5093(00)00945-X ↗
29. Reaction-Web: Fact-Web Programs. http://www.crct.polymtl.ca/factweb.php.
30. Y. Li and L. Wang: Thin Solid Films, 2009, vol. 517, pp. 3208–10.10.1016/j.tsf.2008.10.098 ↗
31. C.R. Werrett, D.R. Pyke, and A.K. Bhattacharya: Surf. Interface Anal., 1997, vol. 25, pp. 809–16.10.1002/(SICI)1096-9918(199709)25:10<809::AID-SIA304>3.0.CO;2-M ↗
32. E.F. Emley: Principles of Magnesium Technology, 1st ed., Pergamon Press, Oxford, United Kingdom, 1966.
33. J. Campbell: Casting, 2nd ed., Butterworth-Heinemann, Oxford, United Kingdom, 2003.
34. A.R. Mirak, M. Divandari, S.M.A. Boutorabi, and J. Campbell: Int. J. Cast. Met. Res., 2007, vol. 20, pp. 215–20.10.1179/136404607X256042 ↗
35. S.P. Cashion, N.J. Ricketts, and P.C. Hayes: J. Light Met., 2002, vol.2, pp. 43–47.10.1016/S1471-5317(02)00012-3 ↗