journal article·2007-06

Effects of Substitutional Solute Accumulation at α/γ Boundaries on the Growth of Ferrite in Low Carbon Steels

H. Guo, M. Enomoto

Publisher page

Abstract

The growth of proeutectoid ferrite in Fe-C-X alloys containing ∼3 at. pct X, where X is Mn, Ni, Cr, and Si, is re-examined in terms of solute drag using the Hillert–Sundman theory. The differences of measured growth rates from those calculated under paraequilibrium (PE) reported previously were accounted for taking into account not only the binding energy of substitutional solute with the boundary, but also the transformation temperature of the alloy. The ferrite growth in quaternary Fe-C-Mn-Si alloys was modeled using the stationary-interface approximation for the matrix of finite grain size. The principal features of growth in these alloys, i.e., initial fast unpartitioned growth and subsequent slow partitioned growth with a high level of carbon supersaturation in austenite, were reproduced incorporating cosegregation of Mn and Si at the boundary. Thus, a strong Mn-Si interaction is likely to enhance accumulation of these elements at the boundary and yield the growth behavior that resembles the growth stasis in Fe-C-Mo alloys.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. M. Hillert: “Paraequilibrium,” Internal Report, Swedish Institute of Metals, Stockholm, 1947
2. J.S. Kirkaldy: Can. J. Phys., 1958, vol. 36, pp. 907–1610.1139/p58-097 ↗
3. G.R. Purdy, D.H. Weichert, J.S. Kirkaldy: Trans. TMS-AIME, 1964, vol. 230, pp. 1025–34
4. H.I. Aaronson, H.A. Domian: Trans. TMS-AIME, 1966, vol. 236, pp. 781–96
5. J.B. Gilmour, G.R. Purdy, J.S. Kirkaldy: Metall. Trans., 1972, vol. 3, pp. 1455–6410.1007/BF02643033 ↗
6. D.E. Coates: Metall. Trans., 1973, vol. 4, pp. 1077–8610.1007/BF02645611 ↗
7. K.R. Kinsman, H.I. Aaronson: Metall. Trans., 1973, vol. 4, pp. 959–6710.1007/BF02645596 ↗
8. J.R. Bradley, H.I. Aaronson: Metall. Trans. A, 1981, vol. 12A, pp. 1729–4110.1007/BF02643755 ↗
9. M. Enomoto, H.I. Aaronson: Metall. Trans. A, 1987, vol. 18A, pp. 1547–5710.1007/BF02646138 ↗
10. M. Hillert: Scripta Mater., 2002, vol. 46, pp. 447–5310.1016/S1359-6462(01)01257-X ↗
11. K. Oi, C. Lux, G.R. Purdy: Acta Mater., 2000, vol. 48, pp. 2147–5510.1016/S1359-6454(00)00041-0 ↗
12. C.R. Hutchinson, A. Fuchsmann, Y.J.M. Brechet: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1211–2110.1007/s11661-004-0295-1 ↗
13. A. Phillion, H.S. Zurob, C.R. Hutchinson, H. Guo, D.V. Malakhov, J. Nakano, G.R. Purdy: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1237–4210.1007/s11661-004-0297-z ↗
14. M. Enomoto: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1703–1010.1007/s11661-006-0113-z ↗
15. P.G. Boswell, K.R. Kinsman, G.J. Shiflet, and H.I. Aaronson: in Mechanical Properties and Phase Transformations in Engineering Materials, S.D. Antolovich, R.O. Ritchie, and W.W. Gerberich, eds., TMS, Warrendale, PA, 1986, pp. 445–66
16. G.J. Shiflet, H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1413–3210.1007/BF02672560 ↗
17. W.T. Reynolds Jr., F.Z. Li, C.K. Shui, H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1433–6310.1007/BF02672561 ↗
18. K.M. Wu, M. Kagayama, M. Enomoto: Mater. Sci. Eng., 2003, vol. A343, pp. 143–50
19. R.E. Hackenberg, G.J. Shiflet: Acta Mater., 2003, vol. 51, pp. 2131–4710.1016/S1359-6454(02)00562-1 ↗
20. E.S. Humphreys, H.A. Fletcher, J.D. Hutchins, A.J. Garratt-Reed, W.T. Reynolds Jr., H.I. Aaronson, G.R. Purdy, G.D.W. Smith: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1223–3510.1007/s11661-004-0296-0 ↗
21. H.I. Aaronson, W.T. Reynolds Jr., G.R. Purdy: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1187–1210.10.1007/s11661-004-0294-2 ↗
22. H.I. Aaronson, W.T. Reynolds Jr., G.R. Purdy: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1731–4510.1007/s11661-006-0116-9 ↗
23. T. Tanaka, H.I. Aaronson, M. Enomoto: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 561–8010.1007/BF02663906 ↗
24. H. Guo, G.R. Purdy, M. Enomoto, H.I. Aaronson: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1721–2910.1007/s11661-006-0115-x ↗
25. M. Hillert, B. Sundman: Acta Metall., 1976, vol. 24, pp. 731–4310.1016/0001-6160(76)90108-5 ↗
26. H.B. Aaron, D. Fainstein, G.R. Kotler: J. Appl. Phys., 1970, vol. 41, pp. 4404–1010.1063/1.1658474 ↗
27. R.A. Vandermeer: Acta Metall. Mater., 1990, vol. 38, pp. 2461–7010.1016/0956-7151(90)90257-H ↗
28. M. Enomoto: Acta Mater., 1999, vol. 47, pp. 3533–4010.1016/S1359-6454(99)00232-3 ↗
29. J. Odqvist, M. Hillert, J. Ågren: Acta Mater., 2002, vol. 50, pp. 3211–25.10.1016/S1359-6454(02)00143-X ↗
30. G.R. Purdy, Y.J.M. Brechet: Acta Metall. Mater., 1995, vol. 43, pp. 3763–7410.1016/0956-7151(95)90160-4 ↗
31. M. Enomoto, M. Kagayama, N. Maruyama, and T. Tarui: in Proc. Int. Conf. on Solid-Solid Phase Transformations’99, M. Koiwa, K. Otsuka, and T. Miyazaki, eds., The Japan Institute of Metals, Sendai, 1999, pp. 1453–50
32. M. Hillert: in H.I. Aaronson, ed., Phase Transformations, ASM, Metals Park, OH, 1970, pp. 181–218
33. M. Enomoto, H.I. Aaronson: Scripta Metall., 1985, vol. 19, pp. 1–310.1016/0036-9748(85)90254-6 ↗
34. E.D. Hondros: in Precipitation Processes in Solids, K.C. Russell, and H.I. Aaronson, eds., TMS, Warrendale, PA, 1978, pp. 1–30
35. M. Enomoto, C.L. White, H.I. Aaronson: Metall. Trans. A, 1988, vol. 19A, pp. 1807–1810.1007/BF02645149 ↗
36. M. Enomoto, N. Nojiri, Y. Sato: Mater. Trans. JIM, 1994, vol. 35, pp. 859–6710.2320/matertrans1989.35.859 ↗
37. J.S. Kirkaldy, B.A. Thomson, and E.A. Baganis: in Hardenability Concepts with Applications to Steel, D.V. Doane, and J.S. Kirkaldy, eds., TMS-AIME, Warrendale, PA, 1978, pp. 82–125
38. G. Inden and C.R. Hutchinson: in Austenite Formation and Decomposition, B. Damm and M.J. Merwin, eds., TMS, Warrendale, PA, 2003, pp. 65–79
39. B. Uhrenius: in Hardenability Concepts with Applications to Steel, D.V. Doane and J.S. Kirkaldy, eds., TMS, Warrendale, PA, 1978, pp. 28–81
40. M. Enomoto: Trans. ISIJ, 1988, vol. 28, pp. 826–3510.2355/isijinternational1966.28.826 ↗
41. C.R. Hutchinson, H.S. Zurob, Y. Brechet: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1711–2010.1007/s11661-006-0114-y ↗
42. C.H.P. Lupis: Chemical Thermodynamics of Materials, North-Holland, New York, 1983, pp. 235–62
43. J. Crank: The Mathematics of Diffusion, 2nd ed., Clarendon Press, Oxford, United Kingdom, 1975, pp. 44–68