journal article·2004-02

Role of temperature and strain rate on the hydrogen-induced intergranular rupture in alloy 600

J. Chêne, A. M. Brass

Publisher page

Abstract

Tensile tests were conducted at various temperatures (77 to 550 K) and strain rates (10−5 to 10−1 s−1) in order to study the effects of hydrogen on the ductility loss and the intergranular fracture of hydrogen-charged (32 wt ppm) tensile specimens of alloy 600. The H-induced intergranular cracking was shown to require H segregation to grain boundaries (GBs) during plastic deformation. The concordance between the temperature/strain rate domains, where H-induced intergranular rupture of alloy 600 is observed and those of H transport by dislocations, is in favor of a major influence of this mechanism of H transport on the intergranular rupture of H-charged alloy 600 in the 180 to 500 K temperature range. The possible contribution of this mechanism to intergranular stress corrosion cracking (IGSCC) of alloy 600 in the pressurized water reactor (PWR) environment is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Nuclear Materials and Properties · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. T. Cassagne, F. Vaillant, and P. Combrade: 8th Int. Symp. on Environmental Degradation of Materials in Nuclear Systems-Water Reactors, La Grande Park, IL, 1997, pp. 307–19.
2. M.M. Hall, Jr and D.M. Symons: in Chemistry and Electrochemistry of Stress Corrosion Cracking, R.H. Jones, ed., TMS, Warrendale, PA, 2001, pp. 447–66.
3. D.S. Morton, S.A. Attanasio, G.A. Young, P.L. Andresen, and T.M. Angeliu: Corrosion 2001, Houston, TX, NACE, 2001, paper no. 01117.
4. F. Foct: Ph.D. Thesis, ENSM Saint-Etienne-INP Grenoble. Grenoble, France, 1999, No. 204 TD.
5. R. Rios, T. Magnin, D. Noel, and O. de Bouvier: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 925–39.10.1007/BF02649089 ↗
6. F. Foct, O. de Bouvier, and T. Magnin: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2025–36.10.1007/s11661-000-0230-z ↗
7. D.M. Symons: J. Nucl. Mater., 1999, vol. 265, pp. 225–31.10.1016/S0022-3115(98)00888-5 ↗
8. P.L. Andresen, T.M. Angeliu, and L.M. Young: Corrosion 2001, Houston, TX, NACE, 2001, paper no. 01115.
9. F. Giraudeau: Ph.D. Thesis, The University of New Brunswick, Fredericton, New Brunswick, Canada, 1999.
10. N. Totsuka and Z. Szlarska-Smialowska: Corrosion, 1987, vol. 43 (12), pp. 734–38.10.5006/1.3583860 ↗
11. R. Rios: Ph.D. Thesis Université des Sciences et Technologie de Lille, Lille, France, 1993, No. 1176.
12. Y. Shehu, P. Menut, J. Chêne, and M. Aucouturier: 3rd Int. Conf. on Hydrogen and Materials, P. Azou, ed., Paris, 1982, pp. 899–903.
13. F. Lecoester, J. Chêne, and D. Noel: Mater. Sci. Eng. A, 1999, vol. 262A, pp. 173–83.10.1016/S0921-5093(98)01006-5 ↗
14. D. Delafosse and T. Magnin: Eng. Fract. Mech., 2001, vol. 68 (6), pp. 693–729.10.1016/S0013-7944(00)00121-1 ↗
15. H.K. Birnbaum: in Hydrogen Effects in Metals, N.R. Moody and A.W. Thompson, eds., TMS, Warrendale, PA, 1990, pp. 639–60.
16. P. Sofronis and H.K. Birnbaum: J. Mech. Phys. Solids, 1996, vol. 43 (1), pp. 49–90.10.1016/0022-5096(94)00056-B ↗
17. G.A. Young and J.R. Scully: Scripta Mater., 1997, vol. 36, pp. 713–19.10.1016/S1359-6462(96)00440-X ↗
18. J. Chêne and A.M. Brass: Scripta Mater., 1999, vol. 40 (5), pp. 537–42.10.1016/S1359-6462(98)00451-5 ↗
19. B.A. Wilcox and G.C. Smith: Acta Metall., 1965, vol. 13, pp. 331–43.10.1016/0001-6160(65)90210-5 ↗
20. J.A. Donovan: Metall. Trans. A, 1976, vol. 7A, pp. 1677–83.10.1007/BF02817885 ↗
21. J.K. Tien, A.W. Thompson, I.M. Bernstein, and R.J. Richards: Metall. Trans. A, 1976, vol. 7A, pp. 821–29.10.1007/BF02644079 ↗
22. J.K. Tien, S.V. Nair, and R.R. Jensen: in Hydrogen Effects in Metals, I.M. Bernstein and A.W. Thompson, eds., TMS, Warrendale, PA, 1981, pp. 37–56.
23. G.M. Pressouyre: Acta Metall., 1980, vol. 28, pp. 895–911.10.1016/0001-6160(80)90106-6 ↗
24. F. Lecoester: Ph.D. Thesis, Université Paris-Sud, Orsay, France, 1997.
25. P. Combette and J. Grilhé: Mém. Sci. Rev. Met., 1970, vol. LXVII (7–8), pp. 491–505.
26. A. Kimura and H.K. Birnbaum: Acta Metall. Mater., 1990, vol. 38 (7), pp. 1343–48.10.1016/0956-7151(90)90206-V ↗
27. J.P. Hirth and H.H. Johnson: in Atomistics of Fracture, R.M. Latanision and J.R. Pickens, eds, Plenum Press, New York, NY, 1983, pp. 771–87.10.1007/978-1-4613-3500-9_26 ↗
28. J.P. Hirth: Metall. Trans. A, 1980, vol. 11A, pp. 861–90.10.1007/BF02654700 ↗
29. G.J. Thomas: in Hydrogen Effects in Metals, I.M. Bernstein and A.W. Thompson, eds., TMS, Warrendale, PA, 1981, pp. 77–85.
30. M.I. Baskes, C.F. Melius, and W.D. Wilson: in Hydrogen Effects in metals, I.M. Bernstein and A.W. Thompson, eds., TMS, Warrendale, PA, 1981, pp. 67–75.
31. J. Chêne and A.M. Brass: Int. Conf. H-CDI, N.R. Moody and A.W. Thompson, eds., in press.
32. F. Besenbacher, S.M. Myers, and J.K. Norskov: Nucl. Instrum. Meth. B, 1985, vols. B7–B8, pp. 55–66.10.1016/0168-583X(85)90529-4 ↗
33. J.R. Galvele: Corr. Sci., 1987, vol. 27, pp. 1–33.10.1016/0010-938X(87)90117-X ↗
34. T.M. Angeliu, D.J. Paraventi, and G.S. Was: Corrosion, 1995, vol. 51 (11), pp. 837–48.10.5006/1.3293561 ↗
35. J.M. Boursier, D. Desjardins, and F. Vaillant: Corrosion Sci., 1995, vol. 37 (3), pp. 493–508.10.1016/0010-938X(94)00158-3 ↗
36. J.F. Kergaravat: Ph.D. Thesis, Institut National Polytechnique de Grenoble, Grenoble, France, 1996.