Precipitation of austenite particles at grain boundaries during aging of Fe-Mn-Ni steel
Source abstract
Abstract
Precipitation of austenite particles at grain and lath boundaries after aging treatment of a Fe-8Mn-7Ni alloy was investigated by selected area electron diffraction (SAD), X-ray energy dispersive spectrometry (EDS) in a scanning transmission electron microscope (STEM), and high-resolution (HRTEM) analysis. High spatial-resolution (2 to 5 nm) EDS analysis revealed no significant segregation of alloying elements at grain boundaries but the precipitation of very fine particles of Mn- and Ni-rich phase. Detailed EDS, SAD, and HRTEM analyses all confirmed that these particles are austenite phase, which have a Kurdjumov-Sachs (K-S) orientation relationship with one of the adjacent grain. The concentration of Mn and Ni in austenite, measured by EDS, varied from ∼15 pct to a maximum of ∼30 pct. Low-voltage scanning electron microscopy (SEM) fractographs also revealed the presence of very fine, second-phase precipitates on the fracture surface of the embrittled alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. V.M. Kardonskii and M.D. Perkas: Met. Sci. Heat-Treatment Met., 1966, No. 4, pp. 254–56.10.1007/BF00663126 ↗
2. M. Tanaka, T. Suzuki, and M. Yodogawa: J. Jpn. Inst. Met., 1967, vol. 31, pp. 1075–81.10.2320/jinstmet1952.31.9_1075 ↗
3. J. Manenc: Rev. Met., 1970, vol. 67, pp. 443–50.10.1051/metal/197067050443 ↗
4. D.R. Squires and E.A. Wilson: Metall. Trans., 1972, vol. 3, pp. 575–81.10.1007/BF02642064 ↗
5. M. Yodogawa: Trans. JIM, 1976, vol. 17, pp. 799–808.10.2320/matertrans1960.17.799 ↗
6. R.K. Ray: Z. Metallkd., 1981, vol. 72, pp. 203–10.
7. L.T. Shiang and C.M. Wayman: Metallography, 1988, vol. 21, pp. 399–423.10.1016/0026-0800(88)90004-3 ↗
8. S.J. Kim and C.M. Wayman: Mater. Sci. Eng., 1991, vol. A136, pp. 121–29.10.1016/0921-5093(91)90447-U ↗
9. J. Singh and C.M. Wayman: Mater. Sci. Eng., 1987, vol. 94, pp. 233–42.10.1016/0025-5416(87)90338-7 ↗
10. H.C. Feng, E.A. Wilson, and C.J. McMahon Jr.: 3rd Int. Conf. on the Strength of Metals and Alloys, Cambridge, United Kingdom, 1973, p. 129.
11. H. Suto and T. Murakami: Trans. JIM, 1979, vol. 20, pp. 365–70.10.2320/matertrans1960.20.365 ↗
12. S.J. Kim and C.M. Wayman: Mater. Sci. Eng., 1996, vol. A207, pp. 22–29.10.1016/0921-5093(95)10004-0 ↗
13. N.H. Heo and H.-C. Lee: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1015–20.10.1007/BF02649769 ↗
14. N.H. Heo: Ph.D. Thesis, Seoul National University, Seoul, 1993.
15. N.H. Heo and H.-C. Lee: Proc. 2nd Pacific Rim Int. Conf. Adv. Mater. Process., Kyungju, Korea, 1995, pp. 2019–24.
16. N.H. Heo: Acta Mater., 1996, vol. 44, pp. 3015–23.10.1016/1359-6454(95)00355-X ↗
17. W. Steven and J. Balajiva: J. Iron Steel Inst., 1959, vol. 193, pp. 141–47.
18. Y.Q. Weng and C.J. McMahon, Jr.: Mater. Sci. Technol., 1987, vol. 3, pp. 207–16.10.1179/mst.1987.3.3.207 ↗
19. M. Watanabe, Z. Horita, and M. Nemoto: Ultramicroscopy, 1996, vol. 65, pp. 187–98.10.1016/S0304-3991(96)00070-8 ↗
20. B.V. Kurdjumov and G. Sachs: Z. Phys., 1930, vol. 64, p. 325.10.1007/BF01397346 ↗
21. L. Kaufman and H. Berstein: Computer Calculation of Phase Diagrams, Academic Press, New York, NY, 1970.
22. W. Huang: CALPHAD, 1989, vol. 13, pp. 243–52.10.1016/0364-5916(89)90004-7 ↗
23. Z.S. Xing, D.D. Gohil, A.T. Dinsdale, and T. Chart: DMA(A) 103, National Physical Laboratory, London, 1985.
24. National Physical Laboratory, London, unpublished work, 1989.
25. L.T. Shiang and C.M. Wayman: Metallography, 1988, vol. 21, pp. 425–51.10.1016/0026-0800(88)90005-5 ↗
26. E.A. Wilson: Mater. Sci. Technol., 1998, vol. 14, pp. 277–82.10.1179/mst.1998.14.4.277 ↗
27. D.V. Shtansky, K. Nakai, and Y. Ohmori: Acta Mater., 2000, vol. 48, pp. 1679–89.10.1016/S1359-6454(00)00015-X ↗
28. A.D. King and T. Bell: Metall. Trans. A, 1975, vol. 6A, pp. 1419–29.10.1007/BF02641934 ↗
29. P.L. Ryder, W. Pitsch, and R.F. Mehl: Acta Metall., 1967, vol. 15, pp. 1431–40.10.1016/0001-6160(67)90174-5 ↗
30. M.G. Hall, H.I. Aaronson, and K.R. Kinsman: Surface Sci., 1972, vol. 31, pp. 257–74.10.1016/0039-6028(72)90264-6 ↗
31. T. Furuhara, S. Takagi, H. Watanabe, and T. Maki: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1635–46.10.1007/BF02649821 ↗
32. C.S. Smith: Trans. ASM, 1953, vol. 45, pp. 533–75.
33. N.C. Law and D.V. Edmonds: Metall. Trans. A, 1980, vol. 11A, pp. 33–46.10.1007/BF02700436 ↗
34. M.P. Seah: Acta Metall., 1980, vol. 28, pp. 955–62.10.1016/0001-6160(80)90112-1 ↗